ISO 11898 经典CAN+CANFD标准各Part部分修订和发布状态汇总(Road vehicles — Controller area network )

本文详细介绍了ISO_11898标准各部分的修订与发布状态,涵盖了从数据链路层到物理信号层,再到高速介质访问单元等多个方面。包括ISO11898-1至ISO11898-6的不同版本,以及CANFD的最新进展。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

附“ISO_11898 Part1_2_3_4_5_6标准_新旧版本+CANFD”下载路径:

ISO_11898 Part1_2_3_4_5_6标准_新旧版本+CANFD

 

ISO 11898 Road vehicles — Controller area network (CAN)+CANFD标准各Part部分修订和发布状态汇总:

PartStatusGeneral informationPreviously
Part 1: Data link layer and physical signallingPublishedPublication date : 2015-12
Edition : 2
Number of pages : 65

Official website:
https://www.iso.org/standard/63648.html
ISO 11898-1:2003
Publication date : 2003-12
Edition : 1
Number of pages : 45

Official website:
https://www.iso.org/standard/33422.html 
ISO 11898-1:2003/Cor 1:2006
Publication date : 2006-05
Edition : 1
Number of pages : 6


https://www.iso.org/standard/44158.html
Part 2: High-speed medium access unitPublishedPublication date : 2016-12
Edition : 2
Number of pages : 30

Official website:
https://www.iso.org/standard/67244.html 
Publication date : 2003-12
Edition : 1
Number of pages : 21

Official website:
https://www.iso.org/standard/33423.html
Part 3: Low-speed, fault-tolerant, medium-dependent interface(Technical Corrigendum 1)PublishedISO 11898-3:2006/Cor 1:2006
Publication date : 2006-12
Edition : 1
Number of pages : 2

Official website:
https://www.iso.org/standard/45280.html
ISO 11519-2:1994/Amd 1:1995
Publication date : 1995-04
Edition : 1
Number of pages : 9

Official website:
https://www.iso.org/standard/22393.html 
PublishedISO 11898-3:2006
Publication date : 2006-06
Edition : 1
Number of pages : 25

Official website:
https://www.iso.org/standard/36055.html
ISO 11519-2:1994
Publication date : 1994-06
Edition : 1
Number of pages : 52

Official website:
https://www.iso.org/standard/19470.html 
Part 4: Time-triggered communicationPublishedPublication date : 2004-08
Edition : 1
Number of pages : 32

Official website:
https://www.iso.org/standard/36306.html
 
Part 5: High-speed medium access unit with low-power modeWithdrawnPublication date : 2007-06
Edition : 1
Number of pages : 20

Official website:
https://www.iso.org/standard/41284.html
 
Part 6: High-speed medium access unit with selective wake-up functionalityWithdrawnPublication date : 2013-11
Edition : 1
Number of pages : 14

Official website:
https://www.iso.org/standard/59165.html
 


 

欢迎大家给我留言,如果觉得好,动动你的手指,“点赞”+“收藏”

获取更多汽车行业资讯,以及工具链的使用,可以关注微信公众号“汽车电子助手

或者扫描下方二维码进行关注

在这里插入图片描述


END

CAN总线在ISO-11898 中的全集 ISO 11898-1:2003 specifies the data link layer (DLL) and physical signalling of the controller area network (CAN). This document describes the general architecture of CAN in terms of hierarchical layers according to the ISO reference model for open systems interconnection (OSI) established in ISO/IEC 7498-1 and provides the characteristics for setting up an interchange of digital information between modules implementing the CAN DLL with detailed specification of the logical link control (LLC) sublayer and medium access control (MAC) sublayer. ISO 11898-2:2003 specifies the high-speed (transmission rates of up to 1 Mbit/s) medium access unit (MAU), and some medium dependent interface (MDI) features (according to ISO 8802-3), which comprise the physical layer of the controller area network. ISO 11898-3:2006 specifies characteristics of setting up an interchange of digital information between electronic control units of road vehicles equipped with the CAN at transmission rates above 40 kBit/s up to 125 kBit/s. ISO 11898-4:2004 specifies time-triggered communication in the CAN. It is applicable to setting up a time-triggered interchange of digital information between electronic control units (ECU) of road vehicles equipped with CAN, and specifies the frame synchronisation entity that coordinates the operation of both logical link and media access controls in accordance with ISO 11898-1, to provide the time-triggered communication schedule. ISO 11898-5:2007 specifies the CAN physical layer for transmission rates up to 1 Mbit/s for use within road vehicles. It describes the medium access unit functions as well as some medium dependent interface features according to ISO 8802-2. This represents an extension of ISO 11898-2, dealing with new functionality for systems requiring low-power consumption features while there is no active bus communication.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

汽车电子助手

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值