[71]"D:/Work/CCS/ccs_20/ccs/tools/compiler/ti-cgt-armllvm_4.0.3.LTS/bin/tiarmclang.exe" -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -mlittle-endian -mthumb -gdwarf-3 -march=armv7e-m -Wl,-m"simple_tx_rfprop.map" -Wl,-i"D:/Work/SatIoT/CC1352/SDK/simplelink_cc13xx_cc26xx_sdk_8_30_01_01/source" -Wl,-i"D:/Work/SatIoT/CC1352/SDK/simplelink_cc13xx_cc26xx_sdk_8_30_01_01/kernel/tirtos7/packages" -Wl,-i"D:/Work/Project/jiang/bload-master/simple_tx_rfprop/Debug/syscfg" -Wl,-i"D:/Work/CCS/ccs_20/ccs/tools/compiler/ti-cgt-armllvm_4.0.3.LTS/lib" -Wl,--diag_wrap=off -Wl,--display_error_number -Wl,--warn_sections -Wl,--xml_link_info="simple_tx_rfprop_linkInfo.xml" -Wl,--rom_model -o "simple_tx_rfprop.out" "./main_tirtos.o" "./rfPacketTx.o" "./syscfg/ti_devices_config.o" "./syscfg/ti_radio_config.o" "./syscfg/ti_drivers_config.o" "./syscfg/ti_sysbios_config.o" "./oad/bim_interface.o" "./oad/flash_interface.o" "./oad/oad_image_header.o" "./oad/upgrade_manager.o" "../cc13x2_cc26x2_tirtos7_active.cmd" -Wl,-lti_utils_build_linker.cmd.genlibs -Wl,-llibc.a
[72]gmake[1]: *** No rule to make target 'input-file.error', needed by 'output-file.error'.
[73]Finished building target: "simple_tx_rfprop.out"
[74]D:/Work/CCS/ccs_20/ccs/tools/compiler/ti-cgt-armllvm_4.0.3.LTS/bin/tiarmobjcopy -O ihex simple_tx_rfprop.out simple_tx_rfprop.hexD:/Work/SatIoT/CC1352/SDK/simplelink_cc13xx_cc26xx_sdk_8_30_01_01/tools/common/oad/oad_image_tool --verbose ccs D:/Work/Project/jiang/bload-master/simple_tx_rfprop/Debug 7 -hex1 D:/Work/Project/jiang/bload-master/simple_tx_rfprop/Debug/simple_tx_rfprop.hex -k D:/Work/SatIoT/CC1352/SDK/simplelink_cc13xx_cc26xx_sdk_8_30_01_01/tools/common/oad/private.pem -o D:/Work/Project/jiang/bload-master/simple_tx_rfprop/Debug/simple_tx_rfprop_oad
[75]OVERVIEW: llvm-objcopy tool
[76]USAGE: llvm-objcopy [options] input [output]
[77]OPTIONS:
[78] --add-gnu-debuglink=debug-file
[79] Add a .gnu_debuglink for <debug-file>
[80] --add-note-segment=file Make a note segment with the contents of <file>.
[81] --add-section=section=file
[82] Make a section named <section> with the contents of <file>
[83] --add-symbol=name=[section:]value[,flags]
[84] Add new symbol <name> to .symtab. Accepted flags: global, local, weak, default, hidden, protected, file, section, object, function, indirect-function. Accepted but ignored for compatibility: debug, constructor, warning, indirect, synthetic, unique-object, before
[85] --adjust-start <value> Alias for --change-start
[86] --allow-broken-links Allow the tool to remove sections even if it would leave invalid section references. The appropriate sh_link fields will be set to zero.
[87] --binary-architecture=<value>
[88] Ignored for compatibility
[89] -B <value> Alias for --binary-architecture
[90] --change-start=incr Add <incr> to the start address. Can be specified multiple times, all values will be applied cumulatively
[91] --compress-debug-sections=format
[92] Compress DWARF debug sections using specified format. Supported formats: zlib, zstd. Select zlib if <format> is omitted
[93] --core-exe=coreid:filename
[94] Specify an ELF executable for a Core ID as input.
[95] --decompress-debug-sections
[96] Decompress DWARF debug sections
[97] --disable-deterministic-archives
[98] Disable deterministic mode when operating on archives (use real values for UIDs, GIDs, and timestamps).
[99] --discard-all Remove all local symbols except file and section symbols. Also remove all debug sections
[100] --discard-locals Remove compiler-generated local symbols, (e.g. symbols starting with .L)
[101] --dump-mmELFConfig Dump the contents of the internal mmELFConfig structure.
[102] --dump-section=section=file
[103] Dump contents of section named <section> into file <file>
[104] -D Alias for --enable-deterministic-archives
[105] --enable-deterministic-archives
[106] Enable deterministic mode when operating on archives (use zero for UIDs, GIDs, and timestamps).
[107] --extract-dwo Remove all sections that are not DWARF .dwo sections from file
[108] --extract-main-partition
[109] Extract main partition from the input file
[110] --extract-partition=name
[111] Extract named partition from input file
[112] -F <value> Alias for --target
[113] --gap-fill=value Fill the gaps between sections with <value> instead of zero. <value> must be an unsigned 8-bit integer. This option is only supported for ELF input and binary output
[114] --globalize-symbol=symbol
[115] Mark <symbol> as global
[116] --globalize-symbols=filename
[117] Reads a list of symbols from <filename> and marks them global
[118] -G <value> Alias for --keep-global-symbol
[119] -g Alias for --strip-debug
[120] --input-target=<value> Format of the input file
[121] -I <value> Alias for --input-target
[122] -j <value> Alias for --only-section
[123] --keep-file-symbols Do not remove file symbols
[124] --keep-global-symbol=symbol
[125] Convert all symbols except <symbol> to local. May be repeated to convert all except a set of symbols to local
[126] --keep-global-symbols=filename
[127] Reads a list of symbols from <filename> and runs as if --keep-global-symbol=<symbol> is set for each one. <filename> contains one symbol per line and may contain comments beginning with '#'. Leading and trailing whitespace is stripped from each line. May be repeated to read symbols from many files
[128] --keep-section=section Keep <section>
[129] --keep-symbol=symbol Do not remove symbol <symbol>
[130] --keep-symbols=filename Reads a list of symbols from <filename> and runs as if --keep-symbol=<symbol> is set for each one. <filename> contains one symbol per line and may contain comments beginning with '#'. Leading and trailing whitespace is stripped from each line. May be repeated to read symbols from many files
[131] --keep-undefined Do not remove undefined symbols
[132] -K <value> Alias for --keep-symbol
[133] --localize-hidden Mark all symbols that have hidden or internal visibility as local
[134] --localize-symbol=symbol
[135] Mark <symbol> as local
[136] --localize-symbols=filename
[137] Reads a list of symbols from <filename> and marks them local
[138] -L <value> Alias for --localize-symbol
[139] --new-symbol-visibility=<value>
[140] Visibility of symbols generated for binary input or added with --add-symbol unless otherwise specified. The default value is 'default'
[141] -N <value> Alias for --strip-symbol
[142] --only-keep-debug Produce a debug file as the output that only preserves contents of sections useful for debugging purposes
[143] --only-section=section Remove all but <section>
[144] --output-target=<value> Format of the output file
[145] -O <value> Alias for --output-target
[146] --pad-to=address Pad the output up to the load address <address>, using a value of zero or the value specified by the --gap-fill option. This option is only supported for ELF input and binary output
[147] --prefix-alloc-sections=prefix
[148] Add <prefix> to the start of every allocated section name
[149] --prefix-symbols=prefix Add <prefix> to the start of every symbol name
[150] --preserve-dates Preserve access and modification timestamps
[151] -p Alias for --preserve-dates
[152] --redefine-sym=old=new Change the name of a symbol old to new
[153] --redefine-syms=filename
[154] Reads a list of symbol pairs from <filename> and runs as if --redefine-sym=<old>=<new> is set for each one. <filename> contains two symbols per line separated with whitespace and may contain comments beginning with '#'. Leading and trailing whitespace is stripped from each line. May be repeated to read symbols from many files
[155] --regex Permit regular expressions in name comparison
[156] --remove-section=section
[157] Remove <section>
[158] --rename-section=old=new[,flag1,...]
[159] Renames a section from old to new, optionally with specified flags. Flags supported for GNU compatibility: alloc, load, noload, readonly, exclude, debug, code, data, rom, share, contents, merge, strings, large
[160] -R <value> Alias for --remove-section
[161] --set-section-alignment=section=align
[162] Set alignment for a given section
[163] --set-section-flags=section=flag1[,flag2,...]
[164] Set section flags for a given section. Flags supported for GNU compatibility: alloc, load, noload, readonly, exclude, debug, code, data, rom, share, contents, merge, strings, large
[165] --set-section-type=section=type
[166] Set the type of section <section> to the integer <type>
[167] --set-start=addr Set the start address to <addr>. Overrides any previous --change-start or --adjust-start values
[168] --shared-obj=filename Specify a static shared object file as input for building an mmELF file.
[169] --split-dwo=dwo-file Equivalent to extract-dwo on the input file to <dwo-file>, then strip-dwo on the input file
[170] --strip-all-gnu Compatible with GNU's --strip-all
[171] --strip-all Remove non-allocated sections outside segments. .gnu.warning* and .ARM.attribute sections are not removed
[172] --strip-debug Remove all debug sections
[173] --strip-dwo Remove all DWARF .dwo sections from file
[174] --strip-non-alloc Remove all non-allocated sections outside segments
[175] --strip-sections Remove all section headers and all sections not in segments
[176] --strip-symbol=symbol Strip <symbol>
[177] --strip-symbols=filename
[178] Reads a list of symbols from <filename> and removes them
[179] --strip-unneeded-symbol=symbol
[180] Remove symbol <symbol> if it is not needed by relocations
[181] --strip-unneeded-symbols=filename
[182] Reads a list of symbols from <filename> and removes them if they are not needed by relocations
[183] --strip-unneeded Remove all symbols not needed by relocations
[184] --subsystem=name[:version]
[185] Set PE subsystem and version
[186] -S Alias for --strip-all
[187] --target=<value> Format of the input and output file
[188] --update-section=name=file
[189] Replace the contents of section <name> with contents from a file <file>
[190] -U Alias for --disable-deterministic-archives
[191] --version Print the version and exit.
[192] -V Alias for --version
[193] --weaken-symbol=symbol Mark <symbol> as weak
[194] --weaken-symbols=filename
[195] Reads a list of symbols from <filename> and marks them weak
[196] --weaken Mark all global symbols as weak
[197] --wildcard Allow wildcard syntax for symbol-related flags. Incompatible with --regex. Allows using '*' to match any number of characters, '?' to match any single character, '' to escape special characters, and '[]' to define character classes. Wildcards beginning with '!' will prevent a match, for example "-N '*' -N '!x'" will strip all symbols except for "x".
[198] -W <value> Alias for --weaken-symbol
[199] -w Alias for --wildcard
[200] -X Alias for --discard-locals
[201] -x Alias for --discard-all
[202]Pass @FILE as argument to read options from FILE.
[203]gmake[1]: Target 'secondary-outputs' not remade because of errors.
[204]gmake: *** [makefile:155: all] Error 2
报错
最新发布