Abaqus6.14+VS2013+IVF2013安装教程

最新推荐文章于 2025-06-25 02:33:14 发布

qintianhaohao

最新推荐文章于 2025-06-25 02:33:14 发布

阅读量5.4w

点赞数 12

CC 4.0 BY-SA版权

本文链接：https://blog.youkuaiyun.com/qintianhaohao/article/details/79355893

Abaqus6.14+VS2013+IVF2013安装教程

1 安装顺序

1. Abaqus6.14

2. VS2013

3. IVF2013

Abaqus和VS先装谁都行，但是VS要在IVF之前装

2 安装ABAQUS6.14

网上有很多方法，直接百度即可，我一直是用的破解文件里自带的安装方法，和网上的方法在顺序上有一些不同，不过也能成功安装。方法如下。

1. InstallSIMULIA ABAQUS FlexLM License Server

NOTE: If you already have got FlexLMLicense server for ABAQUS 6.13 running skip the installation of FlexLM LicenseServer

1.1. Copy folder SIMULIA to C:

1.2. Run C:\SIMULIA\License\lmtools.exe

1.3. On "Service/License File"tab select "Configuration using Services"

1.4. On "Config Services" tabinput name for "Service Name" (for example: SIMULIA ABAQUS FlexLMServer)

1.5. For "Path to the lmgrd.exefile" browse to C:\SIMULIA\License\lmgrd.exe

1.6. For "Path to license file"browse to C:\SIMULIA\License\ABAQUS.lic

1.7 For "Path to the debug logfile" browse to C:\SIMULIA\License\ABAQUS.log

1.8. Tick "Use Service" and"Start Server at Power Up"

1.9. Click "Save Service"

1.10. On "Start/Stop/Reread" tabclick "Start Server"

1.11. Wait for "Server startedOK" and close LMTOOLS

2.Install ABAQUS 6.14-1

2.1. Run "Install Abaqus Product &Licensing"

2.2. In type of installation select"ABAQUS Products"

2.3. When asked for License server inputfor License server 1 (REQUIRED)

27011@localhost

//注意这里的localhost是本机的计算机名

be sure that 27011 is the same port as inABAQUS.lic one! If you are using different license file use a port from yourlicense file

2.4. When asked for Abaqus license serverinput

27011@localhost

be sure that 27011 is the same port as inABAQUS.lic one! If you are using different license file use a port from yourlicense file

2.5. Enjoy

Cracked by Team-SolidSQUAD (SSQ)