HALCON从入门到入门-零件缺陷检测

测试效果

halcon提供的一个案例,使用模板匹配和阈值分割快速识别出产品的存在缺陷的位置

代码解析

1.获取产品上端和下端区域,创建形状模板

2.将形状模板和两个竖条检测区域的相对位置关系固定

3.同时找到多个形状模板,遍历每个找到的形状模板的对应检测位置区域

4. 对检测区域进行卡尺测量,计算多个卡尺的距离,如果卡尺距离超过一定标准,那么那个地方就可以能是断掉的地方

测试代码

* ------------------------------------------------------------------------------------------------
* This example program uses shape-based matching to align ROIs for the measure
* tool, which then inspects individual razor blades.
* The program can be run in two modes: (1) with the full affine transformation
*                                                                (2) using translate_measure
* Modify the next line to switch between the modes.
USING_TRANSLATE_MEASURE := 0
* ------------------------------------------------------------------------------------------------
* general configuration of HDevelop
dev_update_window ('off')
* image acquisition and window size
read_image (ModelImage, 'razors1')
get_image_pointer1 (ModelImage, Pointer, Type, Width, Height)
dev_close_window ()
dev_open_window (0, 0, Width, Height, 'white', WindowHandle)
dev_set_part (0, 0, Height - 1, Width - 1)
dev_display (ModelImage)
* colors and other settings for the visualization
dev_set_color ('cyan')
dev_set_draw ('margin')
dev_set_line_width (2)
stop ()
* -------------------  start of the application  ----------------
* -> select the model object
Row1 := 46
Column1 := 57
Row2 := 79
Column2 := 94
gen_rectangle1 (ROIPart1, Row1, Column1, Row2, Column2)
gen_rectangle1 (ROIPart2, Row1 + 364, Column1 + 13, Row2 + 364, Column2 + 13)
union2 (ROIPart1, ROIPart2, ModelROI)
area_center (ModelROI, Area, CenterROIRow, CenterROIColumn)
dev_display (ModelImage)
dev_display (ModelROI)
stop ()
* -> create the model
reduce_domain (ModelImage, ModelROI, ImageROI)
create_shape_model (ImageROI, 4, 0, 0, 'auto', 'none', 'use_polarity', 30, 10, ModelID)
inspect_shape_model (ImageROI, ShapeModelImage, ShapeModelRegion, 1, 30)
get_shape_model_contours (ShapeModel, ModelID, 1)
dev_clear_window ()
dev_set_color ('blue')
dev_display (ShapeModelRegion)
stop ()
* step 1: create variables describing  the measurement ROIs and display them
Rect1Row := 244
Rect1Col := 73
DistColRect1Rect2 := 17
Rect2Row := Rect1Row
Rect2Col := Rect1Col + DistColRect1Rect2
RectPhi := rad(90)
RectLength1 := 122
RectLength2 := 2
gen_rectangle2 (MeasureROI1, Rect1Row, Rect1Col, RectPhi, RectLength1, RectLength2)
gen_rectangle2 (MeasureROI2, Rect2Row, Rect2Col, RectPhi, RectLength1, RectLength2)
dev_display (ModelImage)
dev_set_color ('yellow')
dev_display (MeasureROI1)
dev_display (MeasureROI2)
* translate measurement ROIs to lie on XLD model (without clipping!)
get_system ('clip_region', OriginalClipRegion)
set_system ('clip_region', 'false')
move_region (MeasureROI1, MeasureROI1Ref, -CenterROIRow, -CenterROIColumn)
move_region (MeasureROI2, MeasureROI2Ref, -CenterROIRow, -CenterROIColumn)
set_system ('clip_region', OriginalClipRegion)
DistRect1CenterRow := Rect1Row - CenterROIRow
DistRect1CenterCol := Rect1Col - CenterROIColumn
DistRect2CenterRow := Rect2Row - CenterROIRow
DistRect2CenterCol := Rect2Col - CenterROIColumn
if (USING_TRANSLATE_MEASURE != 0)
    * -> measure objects are created only once in advance and then translated later
    gen_measure_rectangle2 (Rect1Row, Rect1Col, RectPhi, RectLength1, RectLength2, Width, Height, 'bilinear', MeasureHandle1)
    gen_measure_rectangle2 (Rect2Row, Rect2Col, RectPhi, RectLength1, RectLength2, Width, Height, 'bilinear', MeasureHandle2)
endif
stop ()
* step 2: find the objects in another image
read_image (SearchImage, 'razors2')
dev_display (SearchImage)
find_shape_model (SearchImage, ModelID, 0, 0, 0.8, 0, 0.5, 'least_squares', 0, 0.7, RowCheck, ColumnCheck, AngleCheck, Score)
if (|Score| > 0)
    for i := 0 to |Score| - 1 by 1
        * step 3: determine the affine transformation
        vector_angle_to_rigid (0, 0, 0, RowCheck[i], ColumnCheck[i], AngleCheck[i], MovementOfObject)
        affine_trans_contour_xld (ShapeModel, ModelAtNewPosition, MovementOfObject)
        dev_display (ModelAtNewPosition)
        * step 4: measure width and distance of the teeth
        * -> display the moved ROIs
        affine_trans_region (MeasureROI1Ref, MeasureROI1AtNewPosition, MovementOfObject, 'constant')
        affine_trans_region (MeasureROI2Ref, MeasureROI2AtNewPosition, MovementOfObject, 'constant')
        dev_display (MeasureROI1AtNewPosition)
        dev_display (MeasureROI2AtNewPosition)
        affine_trans_pixel (MovementOfObject, DistRect1CenterRow, DistRect1CenterCol, Rect1RowCheck, Rect1ColCheck)
        affine_trans_pixel (MovementOfObject, DistRect2CenterRow, DistRect2CenterCol, Rect2RowCheck, Rect2ColCheck)
        if (USING_TRANSLATE_MEASURE != 0)
            * -> translate the already created measure objects
            translate_measure (MeasureHandle1, Rect1RowCheck, Rect1ColCheck)
            translate_measure (MeasureHandle2, Rect2RowCheck, Rect2ColCheck)
            measure_pairs (SearchImage, MeasureHandle1, 2, 25, 'negative', 'all', RowEdge11, ColEdge11, Amp11, RowEdge21, ColEdge21, Amp21, Width1, Distance1)
            measure_pairs (SearchImage, MeasureHandle2, 2, 25, 'negative', 'all', RowEdge12, ColEdge12, Amp12, RowEdge22, ColEdge22, Amp22, Width2, Distance2)
        else
            * -> create new measure objects and destroy them after the measurement
            RectPhiCheck := RectPhi + AngleCheck[i]
            gen_measure_rectangle2 (Rect1RowCheck, Rect1ColCheck, RectPhiCheck, RectLength1, RectLength2, Width, Height, 'bilinear', MeasureHandle1)
            gen_measure_rectangle2 (Rect2RowCheck, Rect2ColCheck, RectPhiCheck, RectLength1, RectLength2, Width, Height, 'bilinear', MeasureHandle2)
            * step 5: perform the measurement
            measure_pairs (SearchImage, MeasureHandle1, 2, 25, 'negative', 'all', RowEdge11, ColEdge11, Amp11, RowEdge21, ColEdge21, Amp21, Width1, Distance1)
            measure_pairs (SearchImage, MeasureHandle2, 2, 25, 'negative', 'all', RowEdge12, ColEdge12, Amp12, RowEdge22, ColEdge22, Amp22, Width2, Distance2)
            close_measure (MeasureHandle1)
            close_measure (MeasureHandle2)
        endif
        * step 6: check for too short or missing teeth
        NumberTeeth1 := |Width1|
        NumberTeeth2 := |Width2|
        dev_set_color ('red')
        if (NumberTeeth1 < 37)
            for j := 0 to NumberTeeth1 - 2 by 1
                if (Distance1[j] > 4.0)
                    RowFault := round(0.5 * (RowEdge11[j + 1] + RowEdge21[j]))
                    ColFault := round(0.5 * (ColEdge11[j + 1] + ColEdge21[j]))
                    disp_rectangle2 (WindowHandle, RowFault, ColFault, 0, 4, 4)
                    dev_open_window (0, Width + 20, 80, 80, 'black', WindowHandleZoom)
                    dev_set_part (RowFault - 10, ColFault - 10, RowFault + 10, ColFault + 10)
                    dev_display (SearchImage)
                    disp_rectangle2 (WindowHandleZoom, RowFault, ColFault, 0, 4, 4)
                    stop ()
                    dev_close_window ()
                    dev_set_part (0, 0, Height - 1, Width - 1)
                endif
            endfor
        endif
        if (NumberTeeth2 < 37)
            for j := 0 to NumberTeeth2 - 2 by 1
                if (Distance2[j] > 4.0)
                    RowFault := round(0.5 * (RowEdge12[j + 1] + RowEdge22[j]))
                    ColFault := round(0.5 * (ColEdge12[j + 1] + ColEdge22[j]))
                    disp_rectangle2 (WindowHandle, RowFault, ColFault, 0, 4, 4)
                    dev_open_window (0, Width + 20, 80, 80, 'black', WindowHandleZoom)
                    dev_set_part (RowFault - 10, ColFault - 10, RowFault + 10, ColFault + 10)
                    dev_display (SearchImage)
                    disp_rectangle2 (WindowHandleZoom, RowFault, ColFault, 0, 4, 4)
                    stop ()
                    dev_close_window ()
                    dev_set_part (0, 0, Height - 1, Width - 1)
                endif
            endfor
        endif
        dev_set_color ('yellow')
        stop ()
    endfor
endif
* -------------------  end of the application  -----------------
* clean up
if (USING_TRANSLATE_MEASURE != 0)
    close_measure (MeasureHandle1)
    close_measure (MeasureHandle2)
endif
dev_update_window ('on')
clear_shape_model (ModelID)

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

黄晓魚

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值