墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
1.1k累计阅读
1.1k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
Unity Tweak Tool 安装完成后打开报错
The following schema is missing
com.canonical.unity.webapps
In order to work properly, Unity Tweak Tool recommends you install the necessary packages
原因是有个依赖没有安装，执行下面命令安装完成后即可打开
sudo apt-get install unity-webapps-common
转载于:https://my.oschina.net/jsw5297/blog/664538
全志 T527_Android13 编译 [ 避坑必看 ]
Swap 概念： Linux中Swap（即：交换分区），类似于Windows的虚拟内存，就是当内存不足的时候，把一部分硬盘空间虚拟成内存使用，从而解决内存容量不足的情况。它的功能就是在内存不够的情况下，操作系统先把内存中暂时不用的数据，存到硬盘的交换空间，腾出内存来让别的程序运行。当输入编译命令make -j16 的时候，会有如下提示，这是官方建议通过减少编译线程来解决编译时消耗内存过大的问题。Android 13 系统的编译流程，编译一共分为两部分：内核编译与 Android 编译。
Ubuntu Unity Tweak tool 启动报错 “com.canonical.unity.webap
Ubuntu Unity Tweak tool 启动报错 com.canonical.unity.webapps In order to work properly, Unity Tweak Tool recommends you install the necessary packages 解决方案： sudo apt-get install unity-weba...
Android 15网络子系统深度解析（一）：ConnectivityService与网络管理框架全解析
深入剖析Android 15核心网络服务ConnectivityService的架构设计、NetworkAgent/Factory机制、网络状态管理、以及WiFi/移动网络切换的完整流程
Unity Tweak Tool安装完成后打开报错The following schema is missing
Unity Tweak Tool安装完成后打开报错 The following schema is missing com. canonical. notify-osd In order to work probably, Unity Tweak Tool recommends you install the necessary packages
esp32移植canopen协议栈(二)
本文续接上一篇文章，之前我们已经搭建好了esp32的开发环境，以及初始工程。接下来我们开始实现can驱动相关，以及使用c++封装can接口。本文使用esp32实现c++实现can驱动层的封装。下一步移植canopen！！！嘻嘻。
uni-app蓝牙MTU设置失效探因：从20字节限制到跨设备兼容性实战
本文深入探讨了uni-app蓝牙开发中MTU设置失效的常见问题，特别是20字节限制的成因及解决方案。通过分析设备兼容性、蓝牙协议栈特性和系统版本差异，提供了智能延迟策略、设备特征检测和渐进式MTU提升等实战方案，帮助开发者优化蓝牙数据传输效率。
ubuntu 20.04安装 unity-tweak-tools 启动时遇到错误
安装了半天unity-tweak-tools,一直打不开，报错schema com.canonical.Unity.ApplicationsLens not installed找了半天才解决……希望可以借鉴！ 解决方法： sudo apt-get install unity-lens-applications sudo apt-get install unity-lens-files 以上命令安装两个依赖包就可以打开！ ...
DCDC BUCK开关电源PCB设计
在开关电源中，BUCK（降压）电路、BOOST（升压）电路以及BUCK - BOOST（升降压）三种电路是最基本的拓扑结构。转换器又分DCDC（直流转直流）和ACDC（交流转直流），DCDC装换器结构无疑是比ACDC转换器结构简单，所以从DCDC转换器结构入手学习开关电源是一种很好的选择。本文主要从应用角度，进行相关器件的选型计算以及PCB绘制讲解DCDC 12V转5Vbuck电路。
ubuntu18 No such schema “com.canonical.Unity.Launcher” 左侧栏隐藏或者移动到底部、右侧
这几天刚学习用Ubuntu 想把左侧栏放到底部，使用gsettings set com.canonical.Unity.Launcher launcher-position Bottom之后，报错No such schema “com.canonical.Unity.Launcher” 最会发现在设置里面可以直接设置 ...
锐捷交换机配置SSH
锐捷交换机配置ssh 一、组网需求 通过ssh功能可以远程登录管理设备 二、配置步骤 全局开启ssh服务，并且指定ssh版本 Ruijie>enable Ruijie#configure terminal Ruijie(config)#enable service ssh-server ------>开启SSH服务，默认关闭 Ruijie(config)#ip ssh version 2 ------>默认1.99版本，设置为版本2 添加登
Unity URP 深度解析：利用Stencil与RenderFeature实现高效遮挡高亮
本文深入解析Unity URP中利用Stencil与RenderFeature实现高效遮挡高亮的技术方案。通过模板缓冲机制和自定义RenderFeature，开发者可以在保持场景完整性的同时，清晰标识被遮挡物体位置，提升游戏体验。文章详细介绍了Shader编写、URP管线配置及性能优化技巧，并提供了常见问题排查方法。
在Ubuntu14.04下安装运行Unity-tweak-tool报错scheme missing的解决办法
问题： 安装完unity-tweak-tool后，打开运行弹出出错窗口，忘了截图了，提示内容： scheme missing！ Error: schema com.canonical.indicator.bluetooth not installed 后边还有一句大意是需要安装相应组件才可运行。 解决办法： 首先根据该提示只能得知缺少相应组件，但是不知道缺少那个组件导...
手把手教你学Simulink--移动机器人多轮协同场景实例：基于Simulink的双轮差速PMSM轮毂电机协同驱动仿真
本文介绍了基于Simulink的双轮差速PMSM轮毂电机协同驱动仿真系统。针对移动机器人存在的电机参数不一致、负载分配不均等问题，提出主从同步+力矩补偿的协同控制策略。通过搭建包含运动学模型、PMSM电机模型和矢量控制器的仿真系统，实现了速度同步误差<0.005m/s、轨迹跟踪误差<0.8cm、能耗降低12.5%的优化效果。文章详细阐述了建模步骤、核心算法实现和性能验证，为移动机器人动力系统设计提供了实用参考方案。
unity tweak tool安装失败的解决方法
unity tweak tool 安装显示the following schema is missing：提示说需要一些必备的安装组件。运行以下命令可以搞定：sudo apt-get install unity-webapps-commonPS.如果还没搞定，运行：sudo apt-get install unity-webapps-servicesudo apt-get install over...
IMSL CNL 7.0.0 (x86-64)Crack
IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件，这是C++版本的破解文件
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
axis出现 The following error occurred during schema generation: null
最近在做axis的时候出现了org.apache.axis2.deployment.DeploymentException: The following error occurred during schema generation: null，这里大多是我们的项目的配置有问题。在找遍了axis的配置文件都没有发现有错,最后发现是我们部署的model层的get,set的方法名出错导致webserv
复分析 阿尔福斯(Ahlfors) 第三版答案 英文
答案分为十章，有部分习题没有答案，全英文复分析阿尔福斯(Ahlfors) 第三版答案
Openwrt Package xxx is missing dependencies for the following libraries 问题分析
Openwrt编译时通常会遇到如下问题： Openwrt Package xxx is missing dependencies for the following libraries: libxxx.so.* 首先检查package/xxx/Makefile中的DEPENDS是否加入了对应的依赖，如果加入了还出错，可能就是DEPENDS后面加入的库名字不正确 -------
NTscan扫描工具
ntscan是一个扫描器，可以扫描没有密码和弱密码的共享，先到配置文件中填写猜测的用户名和密码，扫描过程中右侧出现的是扫描日志。
Ubuntu14.10 unity-tweak-tool 不能正常打开的解决方法
新的系统，风格都变了，折腾了一晚上，想安装个苹果主题，可是unity-tweak-tool 这个东西就是死活打不开。这么晚了，不想多说了，直接给解决方法吧： udo apt-get install unity-webapps-common udo apt-get install unity-webapps-service sudo ap
ubuntu18.04安装unity tweak tool
命令行输入：sudo apt install unity-tweak-tool 直到安装完成。 命令行输入:unity-tweak-tool 即可打开软件 打开会出现错误Error: schema com.canonical.notify-osd not installed 输入命令：sudo apt-get install notify-osd 然后重新打开即可 ...
如何自定义 Ubuntu 16.04 Unity 所处位置
将 Unity 位置移到底部 gsettings set com.canonical.Unity.Launcher launcher-position Bottom 将 Unity 位置移到左侧 gsettings set com.canonical.Unity.Launcher launcher-position Left 以上命令执行之后需要重启系统生效。...
Unity -- Error
(1) 脚本序列化 bug ================ #if NG_HSOD_DEBUG using UnityEngine; using System.Text; using System.Collections; using UnityEngine.Assertions; namespace CommandTerminal { public class Terminal : MonoBehaviour { } } #endif 如果打包的时候先切换到没有 NG_...
Unity-tweak-tool插件
Unity Tweak Tool 是Ubuntu系统配置Unity桌面的一个工具
怎么打开unity tweak tool
最佳答案 Unity Tweak Tool是 Unity 桌面的配置工具，其目的是按照你的需要改变 unity桌面。例如：Compiz、外观和桌面设置，Unity Tweak Tool 让这些操作都变得简单容易。Unity Tweak Tool PPA方式安装，打开终端，输入以下命令安装：sudo add-apt-repository ppa:freyja-dev/unity...
ubuntu18.04安装dash-to-dock出错的问题
之前在安装dash-to-dock出现了这种错误： TypeError: ExtensionUtils.initTranslations is not a function Stack trace: init@/home/luxuan/.local/share/gnome-shell/extensions/dash-to-dock@micxgx.gmail.com/prefs.js:856:5...
【Unity知识速递】第7期 Unity 6.6 深度解析：WebGPU 正式版与 WebAssembly64，Web 游戏的内存革命
如何启用 Wasm64？需要注意的是，Wasm64 需要浏览器支持 Memory64 提案，目前主流浏览器的最新版本都已支持。一句话总结： Unity 6.6 用 WebGPU 转正、Wasm64 16GB 内存和渐进式加载三连击，将 Web 游戏的体验天花板又往上推了一大截——Web 平台不再是"妥协版"，正在成为真正的一等公民。Unity 6.6 新增了 WebAssembly64（Wasm64） 构建选项，这可能是本次更新中对 Web 游戏开发者影响最大的一项升级。
设计模式（unity游戏研发版）
当你使用图形用户界面类时通常会遇到一个问题。比如，你创建了自定义按钮类并允许客户端在按钮中注入自定义代码，这样当用户按下按钮时就会触发这些代码。观察者模式允许任何实现了订阅者接口的对象订阅发布者对象的事件通知。你可在按钮中添加订阅机制，允许客户端通过自定义订阅类注入自定义代码。在Unity中，这就像UnityEvent在Inspector中绑定多个回调。
我给 DeepSeek 大肥鱼做了一款马里奥式闯关游戏
当全网都在把大肥鱼做成直播虚拟主播的时候，我决定给她做一款横版闯关游戏。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
2111
扫一扫
