Hdu 1010 Tempter of the Bone

本文介绍了一个迷宫逃生问题,狗仔需要在限定时间内从起点S到达出口D,途中地面会不断消失,不能停留也不能走回头路。迷宫大小为N*M,门将在T秒后短暂开启,狗仔能否顺利逃生?

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Tempter of the Bone

Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 65536/32768 K (Java/Others)
Total Submission(s): 70032    Accepted Submission(s): 19286


Problem Description
The doggie found a bone in an ancient maze, which fascinated him a lot. However, when he picked it up, the maze began to shake, and the doggie could feel the ground sinking. He realized that the bone was a trap, and he tried desperately to get out of this maze.

The maze was a rectangle with sizes N by M. There was a door in the maze. At the beginning, the door was closed and it would open at the T-th second for a short period of time (less than 1 second). Therefore the doggie had to arrive at the door on exactly the T-th second. In every second, he could move one block to one of the upper, lower, left and right neighboring blocks. Once he entered a block, the ground of this block would start to sink and disappear in the next second. He could not stay at one block for more than one second, nor could he move into a visited block. Can the poor doggie survive? Please help him.
 

Input
The input consists of multiple test cases. The first line of each test case contains three integers N, M, and T (1 < N, M < 7; 0 < T < 50), which denote the sizes of the maze and the time at which the door will open, respectively. The next N lines give the maze layout, with each line containing M characters. A character is one of the following:

'X': a block of wall, which the doggie cannot enter;
'S': the start point of the doggie;
'D': the Door; or
'.': an empty block.

The input is terminated with three 0's. This test case is not to be processed.
 

Output
For each test case, print in one line "YES" if the doggie can survive, or "NO" otherwise.
 

Sample Input
4 4 5 S.X. ..X. ..XD .... 3 4 5 S.X. ..X. ...D 0 0 0
 

Sample Output
NO YES

题意为,从S到D的距离是否等于T,主要的陷阱是,必须在T步到达D,不允许多也不允许少


1. 用户与权限管理模块 角色管理: 学生:查看实验室信息、预约设备、提交耗材申请、参与安全考核 教师:管理课题组预约、审批学生耗材申请、查看本课题组使用记录 管理员:设备全生命周期管理、审核预约、耗材采购与分发、安全检查 用户操作: 登录认证:统一身份认证(对接学号 / 工号系统,模拟实现),支持密码重置 信息管理:学生 / 教师维护个人信息(联系方式、所属院系),管理员管理所有用户 权限控制:不同角色仅可见对应功能(如学生不可删除设备信息) 2. 实验室与设备管理模块 实验室信息管理: 基础信息:实验室编号、名称、位置、容纳人数、开放时间、负责人 功能分类:按学科(计算机实验室 / 电子实验室 / 化学实验室)标记,关联可开展实验类型 状态展示:实时显示当前使用人数、设备运行状态(正常 / 故障) 设备管理: 设备档案:名称、型号、规格、购置日期、单价、生产厂家、存放位置、责任人 全生命周期管理: 入库登记:管理员录入新设备信息,生成唯一资产编号 维护记录:记录维修、校准、保养信息(时间、内容、执行人) 报废处理:登记报废原因、时间,更新设备状态为 "已报废" 设备查询:支持按名称、型号、状态多条件检索,显示设备当前可用情况 3. 预约与使用模块 预约管理: 预约规则:学生可预约未来 7 天内的设备 / 实验室,单次最长 4 小时(可设置) 预约流程:选择实验室→选择设备→选择时间段→提交申请(需填写实验目的) 审核机制:普通实验自动通过,高危实验(如化学实验)需教师审核 使用记录: 签到 / 签退:到达实验室后扫码签到,离开时签退,系统自动记录实际使用时长 使用登记:填写实验内容、设备运行情况(正常 / 异常),异常情况需详细描述 违规管理:迟到 15 分钟自动取消预约,多次违规限制预约权限 4. 耗材与安全管理模块 耗材管理: 耗材档案:名称、规格、数量、存放位置、
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值