CANoe_InstallationQuickStartGuide

最新推荐文章于 2024-12-05 16:08:50 发布

light

最新推荐文章于 2024-12-05 16:08:50 发布

阅读量264

点赞数

文章标签： CANoe Vector CAPL

本文链接：https://blog.youkuaiyun.com/y7055/article/details/89702854

版权

Overview
Operating concept

If you are starting up CANoe for the first time, and its functionality and controls are still completely new to you, the following tour will help you to become familiar with its operating concept and its most important features. For this tour you will first set up a very simple CAN bus where CANoe acts as both, sender and receiver.

Set up CANoe

In the first step CANoe is configured as a data source, i.e. as a transmitting station. You will then learn about CANoe's analysis options by studying the generated data in the measurement windows afterwards. In complex real systems CANoe typically also acts as sender and receiver. You can utilize the program as a data source to transmit data to other controllers, but you can simultaneously use it to observe, log and evaluate the data traffic on the CAN bus.

CAPL

In the last part of the tour you will become familiar with the CAPL programming language and create two network nodes of a distributed system to solve a simple simulation task in CANoe.