CITS1401 Computational Thinking with Python

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情


CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 1 of 9 
 
Department of Computer Science and Soffware Engineering 
The University of Western Australia 
CITS1401 
Computational Thinking with Python 
Project 1, Semester 2, 2024 
(Individual project) 
 
Submission deadline: 23:59 PM, 13 September 2024. 
Total Marks: 30 
 
Project Submission Guidelines: 
 
You should construct a Python 3 program containing your solution to the given problem and 
submit your program electronically on Moodle. The name of the file containing your code 
should be your student ID e.g. 12345678.py. No other method of submission is allowed. Please 
note that this is an individual project. 
• Your program will be automatically run on Moodle for sample test cases provided in 
the project sheet if you click the “check” link. However, this does not test all required 
criteria and your submission will be thoroughly tested manually for grading purposes 
after the due date. Remember you need to submit the program as a single file and copypaste
 the same program in the provided text box. 
• You have only one attempt to submit, so don’t submit until you are satisfied with your 
attempt. 
• All open submissions at the time of the deadline will be automatically submitted. There 
is no way in the system to open/modify/reverse your submission. 
• You must submit your project before the deadline listed above. Following UWA policy, 
a late penalty of 5% will be deducted for each day (or part day) i.e., 24 hours after the 
deadline, that the assignment is submitted. 
• No submissions will be allowed after 7 days following the deadline except approved 
special consideration cases. 
You are expected to have read and understood the University's guidelines on academic conduct. 
In accordance with this policy, you may discuss with other students the general principles 
required to understand this project, but the work you submit must be the result of your own 
effort. Plagiarism detection, and other systems for detecting potential malpractice, will CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 2 of 9 
 
therefore be used. Besides, if what you submit is not your own work then you will have learnt 
little and will therefore, likely, fail the final exam. 
 
Project Overview: 
 
In the rapidly expanding world of e-commerce, platforms like Amazon provide vast amounts 
of data that can offer valuable insights into various aspects of product performance. This project 
aims to analyze Amazon data for different products within specific categories, utilizing key 
parameters such as product ID, product name, category, discounted price, actual price, ratings, 
rating count etc., The data set includes a diverse range of categories, each with multiple 
products, allowing us to identify trends and patterns specific to each category. 
 
You are required to write a Python 3 program that will read two different files: a CSV file and 
a TXT file. Your program will perform four different tasks outlined below. While the CSV file 
is required to solve all the tasks (Tasks1-4), the TXT file is only required for the last task (Task 
4). 
After reading the CSV file, your program is required to complete the following: 
• Task 1: Identify Extreme Discount Prices 
Find the product ID with the highest discounted price and the product ID with the 
lowest discounted price for a specific category. 
• Task 2: Summarize Price Distribution 
Provide a summary of the ‘actual price’ distribution i.e., mean, median and mean 
absolute deviation of products for a specific category, considering only the products 
with a rating count higher than 1000. 
• Task 3: Calculate Standard Deviation of Discounted Percentages 
Calculate the standard deviation of the discounted percentages for products with rating 
in the range 3.3≤rating≤4.3, for each category. 
• Task 4: Correlate Sales Data 
Find the correlations between the sales of the products identified in Task 1 (products 
with highest and lowest discounted prices for a specific category). 
Steps: 
o Read the TXT file which contains the sales data for several years, such as 1998-
2021. Each line lists product IDs and the units sold for that year. If a product ID 
is not mentioned in a line, it means zero units sold for that year. CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 3 of 9 
 
o Create two lists, one for the sales of the product with the highest discounted 
price and another for the sales of the product with the lowest discounted price 
identified in Task 1. 
o Process each line of the TXT file to determine the number of units sold each 
year. 
o Each list should have one entry per year, with the total number of entries 
matching the number of lines in the TXT file. 
Finally, calculate the correlation coefficient between the two sales lists. 
 
Requirements: 
 
1) You are not allowed to import any external or internal module in python. While use of 
many of these modules, e.g., csv or math is a perfectly sensible thing to do in production 
setting, it takes away much of the point of different aspects of the project, which is about getting 
practice opening text files, processing text file data, and use of basic Python structures, in this 
case lists and loops. 
2) Ensure your program does NOT call the input() function at any time. Calling the 
input() function will cause your program to hang, waiting for input that automated testing 
system will not provide (in fact, what will happen is that if the marking program detects the 
call(s), it will not test your code at all which may result in zero grade). 
3) Your program should also not call print()function at any time except for the case of 
graceful termination (if needed). If your program encounters an error state and exits gracefully, 
it should return a correlation/standard deviation/mean/median value of zero and print an 
appropriate error message. At no point should you print the program’s outputs or provide a 
printout of the program’s progress in calculating such outputs. Outputs should be returned by 
the program instead. 
4) Do not assume that the input file names will end in .csv or .txt. File name suffixes such 
as .csv and .txt are not mandatory in systems other than Microsoft Windows. Do not 
enforce within your program that the file must end with a specific extension, nor should you 
attempt to add an extension to the provided file name. Doing so can result in loss of marks. 
 
 
 
 CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 4 of 9 
 
Input: 
 
Your program must define the function main with the following syntax: 
def main(CSVfile, TXTfile, category): 
The input arguments for this function are: 
1. CSVfile: The name of the CSV file (as string) containing the record of the Amazon’s 
product data. 
2. TXTfile: The name of the TXT file (as string) containing the record of Amazon’s 
product sales. 
3. category: A string representing the category to be analysed. The Amazon’s product 
data contains multiple categories. 
Output: 
 
The following four outputs are expected: 
i) OP1= [Product ID1, Product ID2]: A list that contains two items, ID of 
the product with the highest discounted price, ID of the product with the lowest 
discounted price. Your output should be stored in a list in the following order: 
[highest discounted price product ID, lowest discounted price product ID] 
For example: ['b07vtfn6hm', 'b08y5kxr6z'] 
Note: If multiple products have the same highest discounted price, select the product 
ID that comes first when the product IDs are sorted in ascending order. Apply the same 
rule for the lowest discounted price. 
 
ii) OP2= [mean, median, mean absolute deviation]: A list containing 
three statistical measures i.e., mean, median, and mean absolute deviation of the actual 
price for products within a given category, considering only those products with a 
rating count higher than 1000. The output should be stored in a list in the following 
order: 
[mean, median, mean absolute deviation] 
For example: [2018.8, 800.0, 2132.48] 
 
 
 CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 5 of 9 
 
iii) OP3= [STD1, STD2, ..., STDN]: A list containing the standard deviation of 
the discounted percentages for products within the rating in the range 3.3 to 4.3 (3.3 ≤ 
rating ≤ 4.3) of each category. The output should be sorted in the descending order. The 
expected output is a list with values sorted in the descending order. 
For example: [0.297, 0.2654, 0.2311, 0.198, 0.1701, 0.1596, 
0.0071] 
 
iv) OP4= Correlation: A numeric value representing the correlation between the 
sales of a product with the highest discounted price and the lowest discounted price 
found in the task 1 above. The expected output is a single float value. 
For example: -0.0232 
 
All returned numeric outputs (both in lists and individual) must contain values rounded to four 
decimal places (if required to be rounded off). Do not round the values during calculations. 
Instead, round them only at the time when you save them into the final output variables. 
 
Examples: 
Download Amazon_products.csv and Amazon_sales.txt from the folder of Project 
1 on LMS or Moodle. An example of how you can call your program from the Python shell 
(and examine the results it returns) is provided below: 
 
>>>OP1, OP2, OP3, OP4= main('Amazon_products.csv', 
'Amazon_sales.txt', 'Computers&Accessories') 
 
>>>OP1 
['b07vtfn6hm', 'b08y5kxr6z'] 
 
>>> OP2 
[2018.8, 800.0, 2132.48] 
 
>>> OP3 
[0.297, 0.2654, 0.2311, 0.198, 0.1701, 0.1596, 0.0071] 
 
>>> OP4 
-0.0232 
 
 
 CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 6 of 9 
 
Assumptions: 
Your program can assume the following: 
1. Anything that is meant to be string (e.g., header) will be a string, and anything that is 
meant to be numeric will be numeric. 
2. All string data in the CSV file and TXT file is case-insensitive, which means 
“Computers&accessories” is same as “Computers&Accessories” or “B08Y5KXR6Z” is 
same as “b08y5kxr6z”. Your program needs to handle the situation to consider both 
strings to be the same. 
3. In the CSV file, the order of columns in each row will follow the order of the headings 
provided in the first row. However, rows can be in random order except the first row 
which contains the headings. 
4. No data will be missing in the CSV file; however, values can be zero and must be 
accounted for when calculating averages and standard deviations. 
[In case any part of the calculation cannot be performed due to zero values or other 
boundary conditions, do a graceful termination by printing an error message and 
returning a zero value (for numbers), None for (string) or empty list depending on the 
expected outcome. Your program must not crash.] 
5. Each line in the TXT file will correspond to a unique year, with no repetition of years. 
The number of years may vary, so avoid hard coding. 
6. All the product IDs in the CSV file will be unique. 
7. The main() will always be provided with valid input parameters. 
8. The necessary formulas are provided at the end of this document. 
 
Important grading instruction: 
 
Note that you have not been asked to write specific functions. The task has been left to you. 
However, it is essential that your program defines the top-level function main(CSVfile, 
TXTfile, category) (commonly referred to as ‘main()’ in the project documents to 
save space when writing it. Note that when main() is written it still implies that it is defined 
with its three input arguments). The idea is that within main(), the program calls the other 
functions. (Of course, these functions may then call further functions.) This is important 
because when your code is tested on Moodle, the testing program will call your main() 
function. So, if you fail to define main(), the testing program will not be able to test your CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 7 of 9 
 
code and your submission will be graded zero. Don’t forget the submission guidelines provided 
at the start of this document. 
 
Marking rubric: 
 
Your program will be marked out of 30 (later scaled to be out of 15% of the final mark). 
24 out of 30 marks will be awarded automatically based on how well your program completes 
a number of tests, reflecting normal use of the program, and how the program handles various 
states including, but not limited to, different numbers of rows in the input file and / or any error 
states. You need to think creatively what your program may face. Your submission will be 
graded by data files other than the provided data file. Therefore, you need to be creative to 
investigate corner or worst cases. I have provided few guidelines from ACS Accreditation 
manual at the end of the project sheet which will help you to understand the expectations. 
 
6 out of 30 marks will be awarded on style (3/6) “the code is clear to read” and efficiency (3/6) 
“your program is well constructed and run efficiently”. For style, think about use of comments, 
sensible variable names, your name at the top of the program, student ID, etc. (Please watch 
the lectures where this is discussed). 
 
Style Rubric: 
0 
 
 Gibberish, impossible to understand 
1 Style is really poor or fair. 
 2 
 
 Style is good or very good, with small lapses. 
 3 Excellent style, really easy to read and follow 
 
Your program will be traversing text files of various sizes (possibly including large csv files) 
so you need to minimise the number of times your program looks at the same data items. 
Efficiency rubric: 
0 Code too complicated to judge efficiency or wrong problem tackled 
1 Very poor efficiency, additional loops, inappropriate use of readline() 
2 Acceptable or good efficiency with some lapses 
3 Excellent efficiency, should have no problem on large files, etc. 
 
Automated testing is being used so that all submitted programs are being tested the same way. 
Sometimes it happens that there is one mistake in the program that means that no tests are 
passed. If the marker can spot the cause and fix it readily, then they are allowed to do that and 
your - now fixed - program will score whatever it scores from the tests, minus 4 marks, because CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 8 of 9 
 
other students will not have had the benefit of marker intervention. Still, that's way better than 
getting zero. On the other hand, if the bug is hard to fix, the marker needs to move on to other 
submissions. 
Extract from Australian Computing Society Accreditation manual 2019: 
As per Seoul Accord section D, a complex computing problem will normally have some or 
all the following criteria: 
 
- involves wide-ranging or conflicting technical, computing, and other issues. 
- has no obvious solution and requires conceptual thinking and innovative analysis to 
formulate suitable abstract models. 
- a solution requires the use of in-depth computing or domain knowledge and an 
analytical approach that is based on well-founded principles. 
- involves infrequently encountered issues. 
- are outside problems encompassed by standards and standard practice for professional 
computing. 
- involves diverse groups of stakeholders with widely varying needs. 
- has significant consequences in a range of contexts. 
- is a high-level problem possibly including many component parts or sub-problems. 
- identification of a requirement or the cause of a problem is ill defined or unknown. 
 
Necessary formulas: 
i) Median 
 
Mathematically, median is represented as: 
X = ordered list of values in the data set. 
n = number of values in the data set. 
 
ii) Mean absolute Deviation 
 
MD = average value of X 
n = number of data values 
xi = data values in X 
 
 CITS1401 Computational Thinking with Python 
Project 1, Semester 2, 2024 
 
Page 9 of 9 
 
iii) Standard deviation: 
 
Mathematically, standard deviation is represented as: 𝑖𝑖=1
𝑁𝑁 − 1 
 
where are observed value in sample data. 𝑥𝑥̅ is the mean value of observations 
and      is the number of sample observations. 
 
iv) Correlation coefficient: 
 
Mathematical formula to calculate correlation is as follows: 
where          and          are the values of sales in each year (mentioned in the sales.txt file) for the 
product with the highest and the lowest discounted price respectively. 𝑥𝑥̅ is the mean of sales of 
product with the highest discounted price and 𝑦𝑦  is the mean of the sales of the product with the 
lowest discounted price. 
 
 
Note: Any updates regarding the project will be posted on Moodle help forum. 
 

戴尔笔记本装Ubuntu 20.04,别急着分区!先搞定这个BIOS设置(Intel RST避坑指南) 本文详细介绍了在戴尔笔记本上安装Ubuntu 20.04时遇到的Intel RST技术兼容性问题及解决方案。通过安全切换至AHCI模式,避免安装过程中找不到硬盘的常见问题,并提供双系统分区策略和安装后的优化建议,确保Ubuntu与Windows 10双系统稳定运行。 阅读详情

相关推荐

DPO(Direct Preference Optimization)直接偏好优化

本文介绍了DPO(直接偏好优化)方法,该方法通过简化传统的RLHF(基于人类反馈的强化学习)流程,直接利用人类偏好数据进行模型优化。DPO的核心思想是跳过奖励模型训练和强化学习交互步骤,通过数学推导将优化目标转化为仅与策略概率分布相关的形式。推导表明最优策略与奖励模型之间存在显式关系,从而可以构建直接优化策略的损失函数。与RLHF相比,DPO简化了训练流程,提高了工程实现稳定性,同时保持了同等效果。

TeenLucifer的博客 1956

InnoDB 内存结构总览:Change Buffer、AHI 与 Log Buffer

本文系统梳理InnoDB内存结构中的ChangeBuffer、Adaptive Hash Index(AHI)与LogBuffer。ChangeBuffer缓存二级索引页不在内存时的变更,减少随机IO,仅在页加载时合并;聚簇索引修改立即执行,因数据本身不可延后。AHI基于高频等值查询自动构建哈希索引,加速定位,仅支持等值操作。LogBuffer为redo log内存缓冲,配合磁盘日志实现崩溃恢复。三者均服务于性能优化,其中ChangeBuffer与AHI共享BufferPool空间,而LogBuffer独立

bksczm的博客 309

Vlan的封装模式和端口讲解(Access、Trunk、Hypbrid端口)

Vlan(Virtual Local Area Network)虚拟局域网,将一个物理的LAN在逻辑上划分为多个广播域,在交换机上实现广播域隔离(增强局域网的安全性、限制广播风暴、简化网络管理)Vlan通过将二层数据帧打上Vlan标签(打上Vlan标签也就是封装Vlan),正常情况下,不同Vlan Tag的数据包是无法二层直接互访的,以此来实现广播域的隔离可以理解为一个Vlan对应一个广播域,同一Vlan内的主机可以二层直接通信,不同Vlan间的主机无法二层直接通信。

m0_49864110的博客 5649

第三篇 第 6 课

前置:第三篇第 1 课(stdx 引入),第二篇第 1 课(std.regex)。环境:仓颉 SDK 1.2.0。本文所有代码与输出均逐行实测。

weixin_41618057的博客 557

Mac上安装虚拟机搭载window系统

用Mac的都知道,很多window用的软件是Mac版本没有的。平时有的还得要求去用那些软件,有几种方式可供大家选择: 1.再买个window本; 2.装双系统; 3.装虚拟机,搭载window系统。 我比较推荐第3条,这样可以在Mac本上做到双开,一边开着mac一边开着window,还能做到同时处理文件,不至于重新启动操作系统,下边是具体实现步骤,其中有几个需要下载的,建议在网速好的时候完...

Coder_Mumu的博客 1万+

LLC同步整流实战:从驱动时序到调试仿真,效率提升与避坑指南

同步整流技术是提升开关电源效率的关键手段,尤其在LLC谐振变换器中,通过低导通电阻MOSFET替代二极管可显著降低副边整流损耗。然而,驱动时序、电流过零检测及轻载模式切换是工程实践中的核心难点。从Vds检测原理到死区调节,再到仿真与实测验证,工程师需掌握完整的调试方法论。该技术广泛应用于通信电源、服务器电源及车载DC/DC,合理设计LLC同步整流方案能实现满载效率提升约1.8个百分点,同时优化热分布。本文以600W半桥LLC样机为线索,深入分析工作模态、驱动芯片选型、波形判断与仿真模型搭建,为电源设计提供可

weixin_29165465的博客 303

信创环境下PageOffice文档控件适配与实践

信创适配做到文档控件这一层,拼的已经不是"有没有国产版本",而是同一个功能在两类终端上是否真的等价。等价的标准很具体:同一次点击能得到同样的结果,同一份公文能得到同样的版式,同一个项目不需要维护两套代码。这背后是三件并不轻松的工作:服务端用一套接口同时支撑两类终端,客户端把两种系统与四种芯片的安装包分发清楚,文档内核层由产品侧跟着 WPS 的版本走。浏览器这一层的压力,则被收进了产品自己的窗口里——升级节奏由产品掌握,不再交给运气。

zi_wu_xian的专栏 336

YOLOv11损失函数原理与源码解读:从调参血泪史到源码级优化

本文深入解析YOLOv11目标检测模型的损失函数设计,揭示其相比前代的关键改进。重点剖析了回归损失中动态权重的小目标优化、分类损失的带温度系数softmax、以及目标损失的自适应阈值机制等创新点。作者通过源码分析指出常见实现陷阱,如梯度回传的正确处理方式、标签分配的匹配策略等。结合实战经验,给出针对小目标检测、类别误判等典型问题的调参建议,并分享实用的调试工具代码片段。最后强调损失函数调参需结合具体任务,指出后处理对实际部署效果的重要影响。全文以工程实践为导向,为开发者提供可直接落地的优化思路。

as1225120794的博客 442

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 614

Android 人像分割实战:OpenCV+YOLOv8+NCNN 三库联动(附 GPU 加速 / 内存优化全方案)

本文详细介绍了在Android项目中集成OpenCV+YOLOv8+NCNN实现实时人像分割的技术方案。主要内容包括:项目环境搭建(配置NDK、添加Native模块)、核心库文件集成(OpenCV、NCNN、YOLOv8模型)、JNI接口设计与实现(Kotlin层调用C++算法)。通过Camera API获取图像数据,使用YOLOv8进行人体检测,结合NCNN高性能推理框架实现人像分割处理,最终将原始画面与分割结果(背景透明)同时显示在Android界面上。该项目采用多技术栈协同工作,OpenCV负责图像处

FJN110的博客 236

斑马算法优化变分模态分解ZOA-VMD数字信号去噪(优化K值 alpha值)【含Matlab源码 4887期】

斑马算法优化变分模态分解ZOA-VMD数字信号去噪(优化K值 alpha值) 完整的代码,包运行;运行操作视频见优快云资源!适合小白!

订阅付费专栏Matlab(奶茶价版),可赠送奶茶价版付费专栏指定代码1份; 811

pcl2启动器下载(Minecraft PCL2 启动器 最新版 安装与使用说明)

摘要:PCL2(Plain Craft Launcher 2)是一款面向 Minecraft 的第三方启动器,支持正式版与快照版本管理、模组与整合包安装、Java 运行时自动匹配,绿色免安装、双击即可运行。适合在 Windows 上玩单机整合包、需要多版本共存或离线启动的用户使用

2611_96675819的博客 226

Windows11上pip安装IsaacSim5.1.0与IsaacLab

本文详细介绍了CUDA Toolkit 12.8.0、IsaacSim和IsaacLab的安装过程。首先从NVIDIA官网下载并安装CUDA Toolkit 12.8.0,然后通过miniforge创建conda环境(env_isaacsim)安装IsaacSim相关Python包,解决了Windows长路径问题。成功运行IsaacSim后,克隆IsaacLab仓库并完成安装验证,最后通过创建空场景测试环境配置。整个安装过程包含详细的命令行操作和问题解决方法,为机器人仿真开发环境搭建提供了完整指导。

拥抱具身智能,昇腾Ascend C 380

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 231

温度PID控制PLC程序

温度PID稳定控制程序,适用于欧姆龙PLC,对其他PLC也具有很大参考价值

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

Java 集合容器高频面试题全解:HashMap 树化阈值、1.7 死循环与 ConcurrentHashMap 演进(2026 招聘 JD 真题复盘)

HashMap 树化阈值 8 的泊松分布依据、退化阈值 6 的防抖设计、JDK 1.7 头插成环死循环的排查与修复、1.8 尾插后为何仍线程不安全、ConcurrentHashMap 放弃分段锁的原因与 ForwardingNode 协作扩容、computeIfAbsent 死锁陷阱、大集合找重复的场景题选型,附三层追问链自测。题目来源为 38 期公开招聘 JD 样本与字节、拼多多、建行、美团、快手公开面经。

蒙眼过河 427

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

spdlog 同步日志库使用详解

spdlog是一个轻量级 C++ 日志库,支持同步日志、异步日志、多线程日志、日志文件轮转和自定义日志格式。对于嵌入式 Linux 应用开发,我建议先使用。它可以帮我们完成:日志级别过滤。时间戳和线程 ID 输出。日志格式化。终端和文件输出。多线程安全写入。日志文件按大小或时间轮转。我们不需要自己实现互斥锁、文件写入、日志格式化和轮转等底层功能。

zengjiajun2006的博客 1124

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

JavaSE通关手册:数据类型与变量

代码无需额外处理,编译时编译器自动完成转换。

xys_678的博客 236

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 185

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 194

动态代理两大流派:JDK 代理与子类代理

业务类想加日志,最直白的写法是侵入式修改: 问题很明显:每个方法都要改一遍,改一个业务要动十处。代理模式的解法是:调用方不直接依赖 ,而是依赖一个代理对象。代理对象长得跟目标一模一样,调用它 → 代理先执行增强逻辑 → 再转调真实对象。 关键在于:代理对象的类型是哪来的?这就是"动态"二字的含义:代理类在运行时才诞生。两个角色: 承载增强逻辑, 负责生成代理类。 组装代理并调用: 输出: 业务代码 一行没动,增强逻辑全在 里。这就是 AOP 的味道。 内部四步: 第 2 步 内部:先查 (同一个接口

Android的专栏 661

C++20协程怎么运行?原理与三大核心组件深度剖析

C++20协程是轻量级的无栈状态机,通过co_await、co_yield、co_return实现挂起与恢复,由Promise、协程句柄和Awaitable三大组件协同工作。协程与线程互补,适用于高效管理大量并发I/O任务,显著降低上下文切换开销。其核心在于编译器生成的状态机机制,需配合库(如cppcoro)使用。掌握Promise控制逻辑、句柄生命周期管理及Awaitable语义,是构建高性能异步程序的基础。

Lucis__的博客 336

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 169

TRingBuffer两端都能增删(快递站版)

TRingBuffer 是一个支持两端增删、下标访问且容量动态增长的环形双端队列。它通过无符号索引的永不归零设计,利用减法自动模运算实现空满判断与元素计数,避免了传统环形缓冲浪费格子的问题。内部以票号(索引)标记首尾,扩容时重排元素为连续存储,保证 O(1) 操作与高缓存效率。虽不线程安全,但其高效性使其成为游戏开发中事件队列、命令缓冲等场景的理想选择。

u013768914的博客 315

Teamcenter Java SOA 开发:连接、查询与保存

本文介绍如何通过 Java 调用 Teamcenter SOA 接口实现外部系统对接,涵盖连接登录、查询保存等核心操作。以最小闭环示例展示 Connection、Service、ModelObject 等关键组件的使用,强调错误处理与事务管理要点。梳理了 DataManagement、Query、File Management 等 API 模块分工,并结合“工作移交WebService”案例,说明幂等性设计与流程状态返回的重要性。适用于 Web 门户、ERP 集成等场景,建议批量操作用 bulk 接口优化性

软件工程师文艺 277

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 64

Mac上装了最新版本的Android Studio,但是没找到jdk的设置选项也没找到jbr的目录

新版Android Studio(2025.3.1+)因三项变更导致常见问题:一、JDK设置移至“DaemonJVM criteria”,新项目默认自动探测或下载JDK;二、JBR目录改名为带版本号的jbr-21等,需进入.app/Contents/查看,或通过About窗口确认运行时;三、命令行缺adb因platform-tools未加入PATH,需在SDK Manager中勾选并配置~/.zshrc中的ANDROID_HOME及PATH。重装或清理残留可解决缺失问题,切勿手动设JAVA_HOME或安装冲

Programming is a highly artistic endeavor 399
上一篇: COMP3760/6760: Enterprise Systems Integration
下一篇: PPM Image Transformations
wx__codinghelp
博客等级 码龄2年 514粉丝 61原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值