COMP3760/6760: Enterprise Systems Integration

《算法设计与分析》全套PPT课件(哈尔滨工程大学) 立即下载

COMP3760/6760: Enterprise Systems Integration

Assignment 1 (10% of the semester)

Semester 2, 2024

The Aggregator Model of eBusiness

Consider the business model of Shippit (appendix 1). Explain how acting as an aggregator, the company makes strategic use of IT to conduct their business (chapter 2/week 1 in our text).

In line with Shippit, what other examples of aggregators can you find?

Shippit is a courier aggregator, which automatically selects the fastest and cheapest courier for every order. Providers include Australia Post, Aramex and Couriers Please …. “Delivery has a genuinely causal effect on loyalty, and through our platform, we have the opportunity to power the next generation of retailing here just as we have done in Australia over the last decade.” ….. “With the influx of international retailers like Amazon, local businesses need robust delivery solutions to maintain customer loyalty. Shippit’s platform. addresses this by offering multiple delivery options, supporting bulky deliveries, and ensuring extensive coverage across both North and South islands,” ….. Shippit offers retailers access to a comprehensive carrier network that covers more than 95 per cent of the country’s parcel volume. The move should allow businesses – from national enterprises to family-run stores – to leverage discounted rates and diverse delivery options … Shippit has a partnership with Australia Post, which allows it to harness the power of more than 11,000 delivery vehicles Australia-wide, making it one of Australia’s largest delivery platforms (Bell, 2024 – appendix 1).

For this assignment write no more than 700 words around the following points:

- Discuss Shippit as an eBusiness

- How does Shippit make strategic use of IT?

- Explain how the aggregator model of eBusiness works

- Find 2-3 other examples of aggregators

1.     Read the articles in appendix  1. The first is more relevant, the second provides further background.

2.     Find some other articles.

3.     Use academic writing approaches (see appendix 2).

a.   There ‘should’ be 3-4 references in your reference list which you have drawn upon to write the report (again

see appendix 2).

4.     Write  @   100  words  each  for  your  introduction   and  conclusion,  and   @  500  words  for  the  main  body  of  the

assignment (Shippit and the strategic aggregator model of eBusiness).

Deliverable and submission

Soft copy only

1.   One PDF document (PDF only) submitted on iLearn.

DATE DUE: 11.55 pm, Friday 16th August - Week 4 Bibliography

Bell, M., (2024) “Shippit to expand into New Zealand as it edges closer to profitability” The Australian 3/7/24 https://www.theaustralian.com.au/

business/companies/shippit-to-expand-into-new-zealand-as-it-edges-closer-to-profitability/news-story/a9979f2cc30edd73a91110d5c574cb4f

(accessed 10/7/24).

Chaffey, D., (2015) Digital Business and e-Commerce Management: Strategy, Implementation and Practice Pearson Harlow U.K.

Hewett, J., (2020) “How Shippit got lean and profitable during COVID” The Australian 27/8/20 https://www.theaustralian.com.au

/business/how-shippit-got-lean-and-profitable-during-covid/news-story/938acbc48a1d71aa3be7f1e6939ec8c6 (accessed 10/7/24). Papazoglou, M., (2012)  Web Services & SOA: Principles and Technology 2nd ed. Pearson U.K.

Papazoglou, M., Ribbers, P., (2011) e-Business: Organizational and Technical Foundations eText John Wiley & Sons Ltd. Chichester West Sussex

U.K. https://www.amazon.com.au/Business-Organizational-Technical-Foundations-ebook/dp/B00DWHOKYU

Appendix 1

Bell, M., (2024) “Shippit to expand into New Zealand as it edges closer to profitability” The Australian 3/7/24

https://www.theaustralian.com.au/business/companies/shippit-to-expand-into-new-zealand-as-it-edges-closer-to- profitability/news-story/a9979f2cc30edd73a91110d5c574cb4f (accessed 10/7/24).

Shippit to expand into New Zealand as it edges closer to profitability

William On and Rob Hango-Zada are taking Shippit to New Zealand. Picture: Nikki Short

The $300m e-commerce delivery platform. rival Shippit will expand into New Zealand as it looks to broaden its footprint across the region months out from becoming profitable. The company, which powers hundreds of millions of deliveries for prominent retailers such as Kmart, Chemist Warehouse and Coles, says it will also enhance the delivery experience for retailers  and  consumers  alike,  demonstrating resilience  and  growth  in a rocky retail landscape.   Shippit  is a courier aggregator, which automatically selects the fastest and cheapest courier for every order. Providers include Australia Post, Aramex and Couriers Please.

Its New Zealand operation will be led by head of market development  Sofia Newcombe supported by a team of 30 – across  research  and  development,  product,  shipping operations,  customer success and sales  – servicing  the country. Shippit co-founder and co-chief executive William On told The Australian that expanding into New Zealand was a logical next step for the start-up as it looked to become a truly Australia-New Zealand platform. “Like Australia, New Zealand is an entrepreneurial, proud and innovative retail market. Our arrival comes at a pivotal time, though, as retailers prepare to compete against foreign retail entrants,” he  said. “Delivery has a genuinely causal effect on loyalty, and through our platform, we have the opportunity to power the next generation of retailing here just as we have done in Australia over the last decade.”

Shippit will  enter  New  Zealand  with  established partnerships with  local retail giants including  Spotlight, Freedom, Harvey Norman, Accent Group, Macpac and Kathmandu. Mr On said that the timing was right to enter New Zealand, with  the  country’s  retail  market  projected  to generate  $8.44bn in  revenue by the end of  2024.  “With the influx of international  retailers   like  Amazon,  local  businesses  need   robust  delivery  solutions  to  maintain  customer  loyalty. Shippit’s  platform. addresses  this  by   offering  multiple   delivery  options,  supporting  bulky   deliveries,  and  ensuring extensive coverage across both North and South islands,” he said.

Expansion comes as Shippit continues to track towards its first profit slated to be achieved by October. Shippit has seen group revenue lift 30 per cent in the past year with order volumes up 26 per cent despite consumers pulling back on retail spending because  of cost-of-living  pressures.  Shippit  offers  retailers  access  to a comprehensive carrier  network  that covers  more  than  95  per  cent  of  the  country’s parcel volume.  The move  should  allow businesses –  from national enterprises to family-run stores – to leverage discounted rates and diverse delivery options.

Shippit has a partnership with Australia Post, which allows it to harness the power of more than  11,000 delivery vehicles Australia-wide, making it one of Australia’s largest delivery platforms. Retail trade has slowed significantly in the past year as rapid interest rate rises coupled with sticky inflation erode many household budgets. Economists forecast that retail trade  data  for  May  to  show  growth  of 0.3  per  cent  in  the  month  compared  to  0.1  per  cent  in  April,  when  the Australian Bureau of Statistics releases it on Wednesday.

Matt Bell is a journalist and digital producer at The Australian and The Australian Business Network. Previously, he reported on the travel and insurance sectors for B2B audiences, and most recently covered property at The Daily

Telegraph.

Hewett, J., (2020) “How Shippit got lean and profitable during COVID” The Australian 27/8/20 https://www.

theaustralian.com.au/business/how-shippit-got-lean-and-profitable-during-covid/news-story/938acbc48a1d71aa3 be7f1e6939ec8c6 (accessed 10/7/24).

How Shippit got lean and profitable during COVID

By Jackson Hewett August 27, 2020

Logistics  software  provider  Shippit was  one  of the  first  companies to recognise the  scale  of  COVID-19’s  impact. Powering fulfilment for the likes of Harvey Norman, Cotton On and Kathmandu, they started seeing how supply chains were  freezing up  China  well before most  companies  had  an  inkling  of how  big the problem would be. They moved quickly, shifting to fully remote working in February and started sharpening the razor when they started to see demand soften. For Rob Hango-Zada, company co-founder, it was an enforced maturation of a five-year-old business that had been enjoying the growth spurts of a fast-moving start-up. “Our habit was always to invest ahead of growth but we took a more conservative approach and felt the need to really cut deep and quickly to preserve some precious capital,” he told The Australian’s Remaking Business live audience.

Hiring stopped, salaries were frozen and rulers were run over any non-essential software subscriptions to jettison bloat. They quickly came to realise that wouldn’t be enough and shifted their mindset to a retail market of “zero to no growth” . Lay-offs ensued. “We cutback on sales and some core operations and reduced layers of management with  a focus to preserve capabilities and maintain a certain level of service,” Hango-Zada said. “We had a beautiful product road map. We’re a software business, so we had a lot of grand plans and when we went through this whole exercise, we completely reset our strategy. “We took on a mantra and mindset of austerity within the business. Cost control was king.”

Where the company previously had that start-up mentality and methodology that afforded a lot of latitude to employees to  innovate inside a strategic framework, instead the leadership team set team targets to “maximise revenue, minimise costs” looking  at  five areas  of the business  including  finding new markets  and  launching products,  improving the  customer  experience and reducing non-staff operating costs. “We did that for a quarter, and it changed our culture. It went from one  which was a little bit more start-up, a little bit more happy-go-lucky to a business which was really determined to succeed  and pull through. The team really dug deep,” Hango-Zada said. They put in place tools to better automate the business,  implementing a new customer relationship management tool, a new billing system and other optimisation software they  had put off during the growth phase. It led to their first profitable quarter since the company was founded and reinforced  to Hango-Zada the need for constant reinvention. “It’s kind of our version of digital transformation,” he said. “We’re a  digital native business but  for us,  looking  at  automating  processes  around  sales,  around  how  we  bill  customers,  and  around how we operate the company was really important.”

Just as Shippit was getting lean, the downturn they had planned for suddenly went in the opposite direction. Sales volumes tripled on the platform. in the first few weeks of the shutdown as millions of people started to work from home, filling online carts with furniture for home offices, gym and exercise equipment and coffee and coffee machines, all while the high-end fashion retailers who had been such a vital part of the platform. since its inception saw sales dry up. The frenzy had subsided somewhat, Hango-Zada said, but demand is still far higher than pre-COVID. Hango-Zada is particularly impressed with the ingenuity shown by businesses who have successfully made the switch to online. “I was speaking to Sal Malatesta, who’s the  founder  of Saint Ali  Coffee  Roasters  down  in Melbourne. All  of a  sudden  overnight,  their business was decimated. But they pivoted really early on and created a bit of movement with their brand, they opened a general store. Now they sell more hand sanitiser than coffee and more personal protective gear than brewing equipment so they’ve done really well,” he said. That innovative spirit is even more important now the second lockdown in Melbourne is underway. According to a recent survey by the Australian Chamber of Commerce and Industry (ACCI), about one third of businesses were concerned about their viability in May, but by August that number had increased to two thirds.

Lisa Livis,  small business banking  spokeswoman for Westpac  said the lockdown was taking its toll on businesses in Victoria and the businesses that were most successful in navigating the lockdown were those who both kept a tight rein on operating costs while identifying new areas for additional revenue. “Their priorities were maintaining income, looking at their cash and keeping their people employed. It was about really sticking to those core functions, while also looking for other opportunities,” Livis said. “Customers who have had really good operational excellence, have been going to their advisors such as their accountants and their relationship manager to do scenario analysis — what’s the worst case, what’s the expected case and what’s the best case. They’ve really hoped for the best but planned for the worst.”

One factor that has been keeping many businesses alive has been the JobKeeper program, with ACCI saying that 60 per  cent of firms were reliant on the subsidy for survival. Hango-Zada said it was definitely a factor in assisting their retail  customers build  and  service  an  online  clientele.  “JobKeeper  has  been  an  absolute godsend for a lot of our  retailers,  bringing their staff back to stores and back to work and, using our technology, turning the stores into fulfilment centres so  they  could  get  products  to   customers  a  lot  quicker  when   they  weren’t  actually  walking  into  stores  themselves,” Hango-Zada said.

While  Shippit  has  been  in  the  enviable position  of  catching  a  favourable  wave  during  the  COVID  lockdown,  the experience overall has been one of maturation for the five-year-old business. The rapid experimentation and willingness to fail from their start-up days has been tempered by the pain of having to let staff go. “Before, if we failed, it was OK. But I think the cost of failure is a lot greater for our business now. We’re a little bit more  ‘measure twice, cut once’ in our mindset,” Hango-Zada said.

Appendix 2

Writing at university level means academic writing. Academic writing is not like writing a novel.     Informal writing styles  are  not  encouraged.     You  are  required  to  substantiate  what you write/say  in  your  academic  and  professional lives. It is only in rare instances where you will be permitted to write works of fiction at university, it is also for similar reasons  that  the  first  person  singular  (I  feel, I think, I did, my feeling is   …),  is  generally  to be avoided in writing university   assignments   (there   are   some   exceptions   to    this   rule,    for    example   law    faculties    often    adopt   the first-person-singular in their writing style).

As insulting as this may seem, as a student you are not considered to be an expert at anything (that usually comes with the title Dr. and then later Professor).     The point is you need to state the source of your information in assignments.

For the purposes of this assignment, we will use the Harvard referencing  style, although if you  are comfortable with footnoting, please do so.

Citing vs. quoting

1.     Where an idea is ‘adopted/adapted’ from an author but restated in your words, one uses citing as a means of

establishing where the information was derived from.     For example

…… Smith (1990) was inclined to believe that … blahblahblah, … (where blahblahblah are your words, but the author’s ideas). No page number needs to be included for citing authors (but you must include the author’s surname, and date of publication of the reference where you have derived the information from).

No, you cannot cite your friends (or lecture/tutorial/practical material).

2.     Where the words have simply been lifted/copied directly by you, is referred to as quoting someone.     For

example  … ..  it  was  felt  that  “of all  the  database  schemas,  the  object  relational  approach  is  … .. ”  (Zhang,

1990  p.  53).  In  this  case  quotation  marks  are  used  as  well  as  a  page  number  stating  where  the information directly came from.

Where you have a quote that is longer than say 20 words, you indent these as a separate paragraph from the main body of your text and you single space the block quote, like so

When faced with  a small problem domain,  system development can be all about modeling of user functional  requirements.  However,  when  faced  with  a  large  problem  domain,  such  as  with  an enterprise information system, system development must recognize the demands placed on it by the non-functional system qualities. The quality of interest in this paper is supportability (Maciaszek and Liong, 2003; Maciaszek et al., 2004).  Supportability  is really the  combination of three qualities – understandability,  maintainability,  and  scalability.  An  unsupportable  system  is  a  legacy  system (Maciaszek, 2005 p. 17).

… . Note, no quote marks are necessary, but you still include author surname, year of publication and page number where possible.

You do not need to italicise block quotes (or normal quotes for that matter).

Lecture notes/course notes do not count as references - these are not to be referred to in written assignments/reports (one is expected to go to the source reference instead – i.e., the book, journal, or conference paper).

Report structure

The word-processed report will include

- table of contents

- sub-titles

- list of references OR bibliography3

3   A list  of references includes just those  specific references you  cited  and/or  quoted  from, whereas  a bibliography includes the

references as well as any other texts (electronic or paper) you may have used in producing the assignment (e.g., you may have looked up a word in a dictionary).

The assignment text should be space and a half or double-spaced. The reference list or bibliography should be single-spaced.

Your paragraphs may either be left-aligned or justified.

Bibliography/Reference list

The minimum level of detail for each book/journal reference used in either a list of references  or bibliography is as follows.

For a book:

Busch, P., (2008) Tacit Knowledge in Organizational Learning IGI-Global Hershey Pennsylvania U.S.A. For a journal article/conference paper:

Venkitachalam, K., Busch, P., (2012) "Tacit Knowledge: Review and Possible Research Directions" Journal of

Knowledge Management 16(2) pp: 357-372. For electronic publications (e.g., ones from the internet):

Busch, P., (2006) "Organisation Design and Tacit Knowledge Transferal: An Examination of Three IT Firms"

Journal ofKnowledge Management Practice 7(2) URL: http://www.tlainc.com/articl111.htm (accessed 10/7/24).

At  the  end  of  your  assignment,  you   simply  place  all  types  of  references  together  in   alphabetical  order  of  author surname. You do not list them separately by book, conference paper and electronic publication.

Marking Rubric

Developing

(Borderline Fail-Pass)

Functional

(Pass)

Proficient (Credit)

Advanced

(Distinction-High

Distinction)

Writing and Analysis

Perhaps 1 or more

references, but little

cohesion in writing. No link between one

concept to the next.

References lacking at the end of the

assignment.

Perhaps 2-4 sources

considered, basic

presentation of concepts but lacking good

synthesis of arguments.

Good range of literature consulted (3-4+

references). Case well argued. Some flaws in analysis.

Excellent understanding of the concepts with very sound synthesis of the

literature (typically 6+ references cited/quoted).

Delphi 13.2控件之msquic4d.rar 立即下载

相关推荐

openworker(Python)

「openworker(Python)」是开源项目(Python)。源码完整,下载解压即可查看使用,适合学习参考、课程设计与二次开发。

COMP3760/6760: Enterprise Systems Integration 1 Semester 2 2024Java

Assignment1 (10% ofeBusinessfAppendix 1“DeliveryTelegraph.Appendix 2DevelopingFail-Pass)Functional(Pass)Proficient(Credit)AdvancedPerhaps1ormorebutlittlecohesioninoneconcepttothenext.Referenceslackingat。

wx___codinghelp的博客 1290

Rosenbrock 优化实验:GD、PSO 与 GA 的收敛对比matlab代码.rar

Rosenbrock 优化实验:GD、PSO 与 GA 的收敛对比matlab代码.rar

COMP3760/6760: Enterprise Systems Integration 2 Semester 2 2024

l) StudentAdmission。

wx_codinghelp的博客 689

STM32 Modbus RTU 主站项目实战-多从站轮询、超时重试与断线自恢复,一个能长期跑的主站调度器

多从站轮询、超时重试与断线自恢复,一个能长期跑的主站调度器。适用:STM32F103C8T6 + 标准外设库,RS485 半双工总线,下挂变频器、电表、温控器。19 步完整工程 · 主站状态机 · 调度表 · 寄存器镜像双缓冲 · 断线降频重试 · 18 例故障速查。v1.0 · 嵌入式工程实战教程。从站是应答方,主站是发起方;发起方一旦没有调度,总线就会僵住。单从站能跑通,多从站就乱:谁先发、发完等多久、超时怎么退、某一个站掉线会不会拖死整条总线。答案不在协议里,在一个按时间戳推进的主站调度器里——本教程从空工程写到能长期运行

数字政府政务服务AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

数字政府政务服务AI大模型赋能智能体平台及AI场景应用规划方案(决策评审版).pptx

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 658

T18_低空经济示范区十五五通感一体化低空智联网与飞行服务保障体系设计方案_生态合作版.pptx

T18_低空经济示范区十五五通感一体化低空智联网与飞行服务保障体系设计方案_生态合作版.pptx

基于粒子群优化算法的三方三层的主从博弈能源系统优化模型研究(Matlab代码实现)

内容概要:本文研究了基于粒子群优化算法的三方三层主从博弈能源系统优化模型,旨在通过Matlab代码实现对包含风、光、火、储等多种能源形式的综合能源系统进行优化调度。该模型构建了包含能源供应商、运营商与用户三类主体的多层次博弈架构,引入主从博弈机制,将不同参与者划分为领导者与跟随者角色,并在不完全信息环境下采用Epsilon纳什均衡策略实现多方利益协调。结合多目标粒子群优化算法,有效解决了系统运行成本、峰谷差与碳排放等多重目标间的权衡问题。研究进一步整合了需求响应与电能转气(P2G)等灵活性资源,提升了系统调节能力,并通过IEEE39等标准系统进行潮流计算与电能质量分析,验证了模型在提升综合能源系统经济性、稳定性与环保性方面的有效性。; 适合人群:具备电力系统、优化算法及博弈论基础知识的科研人员与研究生;从事能源系统优化、智能调度及相关领域研究的专业技术人员;有志于复现高水平期刊论文成果并开展创新性研究的硕博生。; 使用场景及目标:① 学习并掌握主从博弈在综合能源系统中的建模方法与求解流程;② 理解多目标粒子群算法在复杂能源调度问题中的应用技巧;③ 掌握需求响应、P2G等灵活性资源在系统优化中的集成方式;④ 借助Matlab代码复现IEEE39系统的潮流计算与电能质量分析过程,支撑科研项目或学术论文撰写。; 阅读建议:本资源以Matlab代码为核心载体,强调理论建模与仿真实践的深度融合。建议读者在学习过程中结合博弈论与智能优化算法的基础理论,逐步调试代码并分析关键参数的影响,重点关注Epsilon纳什均衡的实现逻辑与多目标优化的收敛特性,从而深入理解能源系统协同优化的内在机制。

T04_城市生命线AI智能体平台及AI大模型应用场景规划方案_技术方案版.pptx

T04_城市生命线AI智能体平台及AI大模型应用场景规划方案_技术方案版.pptx

EPLAN自动成图与报表实战合集 API批量成图脚本+端子表电缆表自动生成

内容概要:EPLAN自动成图与报表自动生成实战合集,含2篇原创:API批量成图脚本骨架(对象模型+可运行C#代码+三个必踩坑+42页从3.5小时压到11分钟实测)、端子表/电缆表/部件清单报表自动生成(配置逻辑+翻车点+提效数据)。适用人群:电气设计工程师、成套厂制图员、EPLAN二次开发。使用场景:图纸批量生成提效、报表自动化。原创整理。

复现基于全局积分滑模控制(GISMC)的欠驱动自主水下航行器(AUV)水平轨迹跟踪控制研究(Simulink仿真、Matlab代码实现)

内容概要:本文研究了基于全局积分滑模控制(GISMC)的欠驱动自主水下航行器(AUV)水平轨迹跟踪控制方法,通过Simulink仿真与Matlab代码实现对该控制策略进行复现与验证。针对欠驱动AUV系统存在的模型不确定性与外部干扰问题,设计了全局积分滑模控制器,有效提升了轨迹跟踪精度与系统鲁棒性,克服了传统滑模控制存在的稳态误差与抖振问题。该控制器通过引入积分项增强了对持续干扰的抑制能力,并确保系统在整个状态空间内实现渐近收敛。仿真结果表明,在复杂海洋环境下,所提方法能够实现对期望轨迹的高精度跟踪,具备优良的动态响应性能与抗干扰能力,适用于AUV在水平面内的精确导航与控制任务。; 适合人群:具备自动控制理论基础、海洋工程背景或从事无人系统控制研究的科研人员,以及熟悉Matlab/Simulink仿真工具的自动化、船舶与海洋工程等相关专业的研究生与工程师。; 使用场景及目标:①用于解决欠驱动AUV在未知扰动下的轨迹跟踪控制问题;②为滑模控制在非线性、强耦合系统中的应用提供仿真验证案例;③推动先进控制算法在水下机器人系统中的工程化实现。; 阅读建议:读者应结合Matlab代码与Simulink模型进行仿真操作,重点关注滑模面设计、控制律推导与参数整定过程,建议在复现基础上尝试引入不同干扰条件或优化控制结构,以深入理解GISMC的控制机理与鲁棒特性。

威百威9000V6商业管理软件-210930稳定版本

支持扫码支付

主动配电网故障恢复的重构与孤岛划分统一模型研究升级版本(Matlab代码实现)

内容概要:本文针对主动配电网在故障情况下的恢复问题,提出了一种网络重构与孤岛划分的统一优化模型,旨在通过协同优化配电网的拓扑结构与分布式电源形成的可控孤岛,最大限度恢复关键负荷供电,提升系统韧性。该模型充分考虑了分布式电源出力特性、负荷分级需求以及配电网辐射状运行等多重约束,构建了以负荷恢复最大化和网络损耗最小化为目标的混合整数非线性规划问题,并采用高效的优化算法进行求解。研究通过Matlab编程实现了完整的模型求解与仿真验证,结果表明所提方法能有效协调重构与孤岛策略,显著提高故障后的供电恢复能力和系统运行的稳定性。; 适合人群:具备电力系统分析、优化理论及Matlab编程基础,从事主动配电网、分布式能源集成、电网韧性提升或智能电网故障恢复等相关领域研究的研究生、科研人员及工程技术人员。; 使用场景及目标:①应用于高比例分布式电源接入的现代配电网故障应急处置与恢复决策;②为提升电网应对极端事件的能力提供先进的理论模型与技术方案;③通过Matlab代码复现与仿真,深入学习和掌握配电网重构、孤岛划分及综合优化的前沿算法。; 阅读建议:建议读者结合电力系统潮流计算、图论基础和优化建模知识进行学习,重点理解模型中目标函数的设计理念、各类物理约束(如潮流、辐射状、孤岛连通性)的数学表征方法,以及求解算法的实现逻辑。务必动手运行并调试所提供的Matlab代码,通过改变网络参数和故障场景来探究模型的适应性和性能边界。

旋转中心标定诊断工具(视觉标定失败定位+Kasa圆拟合)

机器视觉旋转中心标定失败诊断工具:Kasa圆拟合求旋转中心+四类失败原因自动定位(标定点共线/旋转角步集中/拟合残差大/像素机器人映射方向反),含README与示例数据,仅依赖numpy,源自真实产线客诉排查经验。

多目标粒子群算法求解综合能源系统最优容量配置研究(Matlab代码实现)

内容概要:本文研究了基于多目标粒子群算法(MOPSO)求解综合能源系统(IES)中最优容量配置的方法,并提供了完整的Matlab代码实现。研究旨在通过优化风电机组、光伏机组、燃气轮机、储能系统等多种能源设备的容量配置,实现系统在经济性、环保性和能源利用率等方面的多目标平衡。文中构建了综合能源系统容量配置的数学模型,明确了以最低综合成本、最小碳排放为核心的目标函数,以及能量供需平衡、设备出力能力等关键约束条件,并详细阐述了MOPSO算法的实现流程,包括种群初始化、非支配排序、拥挤距离计算和外部存档更新等核心机制。最后,通过Matlab平台的仿真实验验证了该方法的有效性,结果表明该算法能够生成分布均匀且具有良好多样性的Pareto最优解集,为决策者根据不同侧重点选择最终方案提供了科学依据。; 适合人群:具备一定电力系统、优化算法和Matlab编程基础的研究生、科研人员及工程技术人员。; 使用场景及目标:① 学习和掌握综合能源系统容量配置问题的建模方法;② 深入理解多目标粒子群算法(MOPSO)的核心原理及其在实际工程优化问题中的应用;③ 获取可直接运行和修改的Matlab代码,用于复现研究成果或进行二次开发。; 阅读建议:建议读者在阅读时,首先理解综合能源系统的背景和优化问题的数学建模过程,然后结合提供的Matlab代码,逐步跟踪算法的执行流程,重点关注目标函数和约束条件的代码实现,以及MOPSO算法中非支配排序和拥挤距离计算等核心模块。为了更好地掌握,可以尝试调整算例参数、增减优化目标或修改算法参数,观察结果的变化。

塔式熔盐光热朗肯循环电站建模!并且搭建了Simulink模型!!

内容概要:本文详细介绍了塔式熔盐光热朗肯循环电站的建模过程,并基于Simulink搭建了相应的仿真模型,旨在对太阳能热发电系统进行动态仿真与性能分析。通过建立太阳能集热、熔盐传热、蒸汽朗肯循环及发电等关键环节的数学模型,实现对整个电站能量转换过程的精确模拟,为系统优化设计、控制策略研究及运行调度提供技术支持。该模型有助于提升清洁能源系统的仿真精度与研究效率。; 适合人群:从事新能源发电、电力系统仿真、热能工程及相关领域的研究人员、高校师生及工程技术人员。; 使用场景及目标:①用于塔式光热电站的系统级仿真与动态特性分析;②支撑热电联产、多能互补系统及综合能源系统优化调度研究;③为新型控制策略(如温度控制、功率调节)的验证提供平台; 阅读建议:此资源以Simulink仿真为核心,建议读者结合相关热力学与电力系统知识,逐步理解各模块建模原理,并通过调整参数进行仿真实验,深入掌握光热电站的运行机制与优化潜力。

PSO-LSTM基于PSO优化LSTM网络的电力负荷预测(Python代码实现)

内容概要:本文提出了一种基于粒子群优化算法(PSO)优化长短期记忆网络(LSTM)的电力负荷预测方法,并通过Python代码实现了完整的模型构建与仿真验证。该方法利用PSO算法全局寻优的能力,自动优化LSTM网络的关键超参数,如学习率、隐含层节点数、训练迭代次数等,从而克服传统LSTM依赖人工调参导致的预测精度不高和收敛速度慢的问题。文中详细阐述了PSO-LSTM混合模型的架构设计、算法流程及其实现细节,结合实际电力负荷数据进行了实验验证,结果表明该模型在预测精度、稳定性与泛化能力方面均优于标准LSTM及其他传统预测模型,尤其适用于短期电力负荷预测任务。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事电力系统分析、能源管理、智能电网调度及相关领域研究的研发人员、工程技术人员及高校研究生。; 使用场景及目标:①应用于电力系统短期负荷预测,提升电网运行调度的科学性与经济性;②为能源管理系统提供高精度负荷数据支持,优化发电计划与资源配置;③作为智能优化算法与深度学习融合的教学案例,帮助学习者掌握PSO与LSTM协同建模的方法与实践技巧;④为后续研究提供可复现的代码基础和技术参考。; 阅读建议:建议读者结合提供的Python代码,动手复现整个建模与训练过程,深入理解PSO优化机制与LSTM网络结构的耦合方式,并尝试在不同时间尺度和负荷场景的数据集上进行迁移测试,以全面评估模型的适应性与鲁棒性。

上一篇: FIT2002 IT Project Management
下一篇: CITS1401 Computational Thinking with Python
wx__codinghelp
博客等级 码龄2年 514粉丝 61原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值