FINM1416 Workshop 2

第95章 安全工程师:Shell 脚本实现安全扫描、漏洞检测、日志审计 随着网络安全威胁日益复杂,传统的手动安全管理已无法满足现代企业的安全需求。Shell 脚本为安全工程师提供了强大的自动化能力,能够实现 7×24 小时的安全监控、快速漏洞扫描、智能日志分析和实时威胁响应。本章将系统介绍如何使用 Shell 脚本构建完整的安全防护体系,从基线检查到实时监控,帮助你打造自动化的安全运维能力。 阅读详情

FINM1416 Workshop 2 Assignment

This assignment has 2 components: (1) An individual component (50%) to be completed individually on Blackboard, and (2) A group component (50%) to be completed in groups during and after your workshop.

Important:

You must complete your Individual Component to take part in the Group Workshop (there is no point in attending the workshop if you have nothing to bring to the workshop for discussion with your team members).

You must attend the workshop to receive a grade for the group component.

You are expected to work in the same group that you did in your previous workshop.

The individual component is due at 8:00AM on Monday of the workshop week. The group component will commence during the workshop where staff will be present to help ensure you are on the right track. It will be due at the same time one week after your workshop. Please refer to the Assessment tab on Blackboard for details of due dates.

After submitting your group component work, you are required to complete the Peer Assessment individually on Blackboard to evaluate the level of contributions in various aspects made by your group peers. The Peer Assessment implies that not everyone in the same group will have the same mark. The due date for the Peer Assessment is at the same time exactly one week after the due date of your group report.

Preparation

The purpose of this workshop assignment is to complete a Buy vs. Rent analysis. Make sure that you must have completed Modules 3 and 4, Tutorials 3 and 4, and Lecture 3 before attempting this assignment. Failing to do this will likely cause confusion and delay your progress in this assignment.

Problem

Amy has recently accepted a new job offer as a senior research scientist at UQ (St Lucia campus). She moved to Brisbane a few weeks ago and is now considering whether to rent or buy a property in some neighbourhood close to her work. After undertaking several property inspections and independent  research, Amy  has now found a feasible option that suits  her work schedule, lifestyle, and preferences.

1) Buying: A 2-bedroom unit in St Lucia built 10 years ago that takes about 15 minutes’ walk to UQ campus. Despite a strict body corporate requiring permission for pets or major alteration, the unit already has water saving devices installed and is eligible for rooftop solar panel installation – an option that Amy values greatly. If she buys this property, it will be her first home ever.

Property cost: $1,100,000 (Offers over $970,000, but she thinks she can get it for $1,100,000)

Other costs when buying the property: Legal fees ($1,500), deed transfer tax (@3% of property value), solar panels  installation ($6,500).

Ongoing costs: Repairs  and  maintenance  fees  (+$200/month), council fees (+$120/month), sewage and water (+50/month), body corporate fees (+$350/month). Estimated cost savings from rooftop solar panel is $150/month.

Selling in 10 years: Amy plans to sell the townhouse for $1,750,000 in 10 years. She also expects to pay off her mortgage at that time. She estimates that the selling fees she will have to pay to the real estate agent is 2.5% of the selling price.

Benefits: Within a short walking distance to UQ campus and close to Toowong shopping centre, easy access to public transport (UQ Lakes and Chancellor bus stops, Guyatt ferry station, etc.) to CBD and other suburbs, rooftop solar panels installation option.

Having worked for many years, she now has a substantial amount of savings that will allow her to make a deposit of 22% of the purchase price. She will pay any other initial expenses from her own pocket.

2) Renting. If she does not buy the house, she will continue to stay at a place she is temporarily renting now – a house in Kangaroo Point, which is very close to Brisbane CBD but further out from UQ campus. She would commute to UQ using public transport most of the days, costing her $1,200 a year. The rent is $1,300 per fortnight for this 2-bedroom house. The landlord has promised not to increase it until Amy leaves.

Interest rates.

Amy has found two local lenders in Brisbane:

Queensland Country Bank (https://www.queenslandcountry.bank/)

Westpac (https://www.westpac.com.au/ )

Assume that current rates will apply going forward and already have included any discount or benefit (if any).

Required:

Use a 30-year loan and 3-year standard fixed rates to calculate monthly payments. Assume that rates are compounded monthly and Amy can save at the same rate as she can borrow.

In preparation for your assessment, make sure you evaluate the two buy or rent options for both banks. Also, think about how you would decide what option you would choose based on financial factors and what non-financial factors you would consider in your final decision.

Part 1 – Individual Component (due Monday September 2nd  at 8:00AM) (50% of mark)

Use the “Workshop 2 – Buy vs Rent Template” Excel spreadsheet on Blackboard and fill out all cells in yellow. Try to use as many formulas as possible. Guidance for certain cells is provided through comments in the Excel file.

When complete, fill out the Workshop 2 Individual Component (Quiz) on Blackboard. This is what you will be bringing to your workshop to start the discussion with your team members. It prompts you to answer the following questions:

Q1: What is the APR for Queensland Country Bank? For Westpac? You must provide the sources of where you found the rates (the exact link to the webpage where you got the rate) and the date when you retrieved the information).

Q2: What is the total monthly payment (property + bank) for the Buy option under the Queensland Country Bank loan? Under the Westpac loan?

Q3: What is the PV of the buy option with Queensland Country Bank? With Westpac? For the Rent option?

Q4: Upload your filled-out template to Blackboard. Here, also clearly state any assumptions made and why you made them for Q1-4.

Q5: List two non-financial criteria used in selecting a lender and two non-financial criteria when choosing between the Buy and Rent option. Explain the importance of the selected criteria (explanation on non-financial criteria is below) (maximum of 3 sentences on each).

See the marking rubric posted on Blackboard for a breakdown of marks.

Part 2 – Group component (2hr workshop + report due at the same time one week after your workshop) (50% of mark)

You are expected to work in the same group as you did in your previous workshop. You must attend the workshop to get marks for this component.

1) First ≈ 10 minutes :

Brief introduction to the workshop

Staff will walk around the room to each table to help you form. your groups and record group information on Blackboard.

2) Remaining workshop time: Review and discuss the different answers of your group members. Then, begin to brainstorm and write up the answers for your group report (up to 1,000 words in total):

a.     Rank the options using solely financial criteria. Make sure you explain both the theory behind your rankings and provide the necessary computations (attach the completed Excel file in a separate file)

b.    Where are they any differences in the answers to Q1-4? Where did they come from? How did you resolve them? (if there are no differences identified, list what was the most challenging about this exercise and why)

c.     What are the most important non-financial factors that are considered by members of your team, for both lender and Buy vs. Rent, and why? Outline any differences you encountered and whether views have been influenced by other team members.

d.    Describe which option each member would choose, explain which criteria was most important in the decision, and whether this has changed from their initial choice.

The non-financial criteria mentioned in the essay are to come from your general knowledge. The idea is to acknowledge that money is not the only factor in making this type of decision. We are looking for how you think about decision making. There is no single correct answer – anything that would impact your decision is fine provided you can reasonably argue that your selected criteria are relevant to the choice of a particular buy option or to rent, and it is non-financial.

See the marking rubric posted on Blackboard for a breakdown of marks.

Marking

Your final score for the workshop will be computed out of 100 marks. Your best three workshops will count toward your final workshop grade (each worth 15%). Marks will be allocated as follows:

Task Marks

Individual component (completed individually on Blackboard)

50

Group component (a group report completed together with your team members at the

workshop)

50

Total

100

开心消消乐 1)当点击一个1时,该1变被反转为0,同时相邻的上、下、左、右,以及左上、左下、右上、右下8个方向的1(如果存在1)均会自动反转为0;2)进一步地,一个位置上的1被反转为0时,与其相邻的8个方向的1(如果存在1)均会自动反转为0;上述样例中,四个角上的1均在中间的1的相邻8个方向上,因此只需要点击一次即可。给定一个N行M列的二维矩阵,矩阵中每个位置的数字取值为0或1。在上述4 * 4的矩阵中,只需要点击2次,即可将所有的1进行消除。接下来N行表示矩阵的初始值,每行均为M个数,取值范围[0,1] 阅读详情

相关推荐

MPU6050模块DIY翻车实录:ID能读但数据全为零?原来是这个10uF电容惹的祸

本文详细记录了MPU6050模块调试过程中遇到的ID能读但数据全为零的问题排查过程。通过对比不同参考设计,发现CPOUT引脚10uF电容选择不当是导致数据异常的根源,更换为官方推荐的2.2nF电容后问题解决。文章为硬件开发者提供了宝贵的电路设计经验。

weixin_29158047的博客 319

FINM1416 Workshop 2 Java

Workshop2AssignmentindividualgroupRequired:andardThisiswhatyouwillbebringingtoyourmembersclearlystateanymadeand whyyoumadeialYoumustattendtheworkshoptogetmarks≈solelyfinancial。

ishtttsynt的博客 1529

【STM32Cube HAL】输入捕获(六)——PWM测量

实验内容:使用通用定时器输入捕获测量信号的脉宽(检测按键按下的时间)。 一、原理图 二、 CubeMX配置 Step1.打开 STM32CubeMX,点击“New Project”,选择芯片型号,STM32F103VETx。 Step2.选择时钟源,并配置时钟树。选择Crystal/Ceramic Resonator,并配置系统时钟为72M。 Step3.配置SYS,我们这里选择的是Serial Wire。(正常情况配置不配置不影响,debug可以使用。但是你不可以把这...

HAHAHA 1万+

Jackson 序列化 / 反序列化注解 完整版笔记

Jackson 序列化 / 反序列化注解 完整版笔记

handsome_sai的博客 308

视觉惯性SLAM系列——ORB-SLAM3的整体介绍及各个线程的功能(五)

跟踪线程(Tracking Thread)作用:负责处理每一帧图像,进行相机位姿的估计和定位。它首先执行与前一帧图像的特征匹配,然后通过仅运动(motion-only)BA(Bundle Adjustment)优化位姿。如果跟踪失败,它会尝试在所有地图中进行重定位。此外,跟踪线程还负责决定何时插入新的关键帧,以及何时将关键帧从局部地图中移除。详细介绍见局部建图线程(Local Mapping Thread)作用:管理局部地图,向活跃地图添加关键帧和点,移除多余的关键帧和点。

曾经也曾立志 1005

LDRA Testbed(TBrun)软件单元测试_实例讲解(对多次调用的函数打桩)

在之前的文章《LDRA Testbed(TBrun)软件单元测试_操作指南》中,已经讲解了如何使用TBrun进行软件单元测试的基本操作步骤。本篇文章将结合实例进一步讲解被测函数中包含多次调用其他函数时,如何对其打桩来实现测试目的(详细的操作流程本文不再重述,若有不清楚的,可以结合之前的操作指南一起来看)。本文以一个被测函数作为示例,讲解了如何使用Testbed(TBrun)对涉及到多次调用其他函数的被测函数进行单元测试。本文的示例可能比较简单,但是思路、方法和流程都是通用的,希望对大家有所帮助。

文章主要涉及嵌入式软件开发、测试、项目管理等,欢迎交流,共同进步。 1467

Web 版翻译者资料库

本项目是桌面版《翻译者资料库》的 Web 移植版,基于 Spring Boot 3.3、Thymeleaf、Bootstrap 5.3 与 MySQL 8.0 构建。它面向翻译写作提供资料、词汇、句库、文本工具、对照制作、查找、备份恢复及旧库迁移等功能,完整继承桌面版核心业务规则,支持一键启动与离线访问。

howard2005的专栏 199

手把手教你学Simulink——基于Simulink的PR(比例谐振)控制器在单相整流中的应用

本文详细介绍了基于Simulink的PR(比例谐振)控制器在单相整流系统中的应用。通过与传统PI控制器的对比,阐述了PR控制器在交流信号跟踪中的优势:可实现50Hz正弦电流的无静差跟踪,THD低于2%,功率因数接近1。文章从PR控制器原理出发,提供了Simulink建模的具体步骤,包括主电路搭建、电压外环设计、PR控制器实现方法(推荐MATLAB Function方式)以及SPWM调制。通过仿真验证了PR控制在稳态和负载突变情况下的优越性能,并探讨了工程实践中的电网频率自适应、多谐振PR等关键技术。该教程为

MHD0815的博客 124

MCP 协议会成为前端 AI 工程的标准接口吗?

MCP(Model Context Protocol)正在成为连接 AI 模型与外部工具、数据源的一层通用协议。本文从 MCP 的核心机制出发,分析它在浏览器与前端工程中的落地边界,讨论它能否成为前端 AI 工程的标准接口,并给出当下更务实的架构选择建议。

m0_62937412的博客 387

MOS管的体二极管在LLC中的作用

MOSFET是一个三端器件(G、D、S),在N沟道MOSFET的结构中,源极和漏极之间的N型材料中自然形成了一个寄生的PN结,这个PN结就是体二极管(Body Diode),它是不可避免的器件结构。📌 对于N沟MOSFET:体二极管是从漏极 D 到源极 S 的正向导通二极管,方向为 D → S。MOS管的体二极管在LLC中并不是主功率通道,但却是实现软开关(ZVS)和能量过渡的关键“临时路径”。用得好,它是你的朋友;忽略它,电路就可能烧毁。

weixin_43199439的博客 703

基于PCL的电力线点云提取与分割实现

本文基于PCL库实现电力线点云提取与分割,包含6个核心处理阶段:文件读取与结果文件夹创建、高程滤波分割候选点云、欧式聚类去噪、电力线分段提取、球形邻域搜索补全点云、最终分割与可视化保存。通过PCA计算点云线性特征(阈值0.91)筛选电力线点,采用欧式聚类(容忍度3.0)去除噪点,并针对不同规模聚类差异化设置球形搜索半径(4.0/6.0)补全点云。最终通过欧式聚类分割并可视化带颜色点云。算法对高程滤波阈值、聚类参数等具有敏感性,需根据点云特性调整优化。

weixin_45196569的博客 196

LangGraph 本地 build 频频翻车,最终在服务器跑通流式对话

先说结论:我本地那个,一次都没成功过。三次,三次,全挂在拉镜像上。而顺得像刚上过油。这就很像我高中那辆自行车:骑着能走,一上锁就坏。那天晚上我盯着终端里那行红字看了很久,想的不是技术方案,想的是——为什么同一个工具,可以一边让我觉得自己很行,一边让我觉得自己不太行。

人工智能AI技术 323

SAM3 几行代码支持任意图像分辨率,减少显存占用(针对transformers库)

几行代码让sam3支持任意图像分辨率

qq_41234663的博客 158

带着小白学习-微服务-6 实战:网关

地址栏输入:http://localhost:8088/goods/index,这时候就不是到8100端口去调用了,而是8088直接通过路由转发,分别到nacos对应的goods对应的服务中区调用。** 可以看出,这里将前面已经正常运行的server-store子工程(库存服务,服务提供方),server-goods子工程(商品服务,服务消费方)。(1)uri: lb://store 代表要到nacos的注册中心的服务列表中找到服务名为store的微服务;,网关是做路由转发,不是服务调用;

wdyan297的博客 250

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册,内含HL7和ASTM)

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

海外平台频繁弹验证?从 DNS、WebRTC 到浏览器指纹的环境异常排查清单

在运营多地区海外平台账号时,即使代理节点通畅、TCP 握手成功,仍可能遇到频繁人机验证、地区限制、播放失败等异常。核心结论是:这类问题往往不在网络传输层,而在浏览器环境参数与网络出口之间的逻辑自洽性。本文从 DNS 泄漏、WebRTC 穿透、时区与语言匹配、Canvas/WebGL 指纹、TLS 特征五个维度,给出一份可复现的环境异常排查清单,并对比个人手动配置与工程化环境管理方案的适用边界。适用于跨境运营、多账号运维团队。

P1Browser【p1指纹浏览器】的博客 239

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

智能问诊的流程

本文介绍基于FastAPI构建的医疗多Agent系统MediAgent,通过症状分析、诊断推理与治疗建议等模块协同,实现从问诊到报告生成的完整工作流。系统采用前后端分离架构,结合MySQL、RabbitMQ与Docker实现工程化部署,支持异步化验结果接入。虽当前状态暂存于内存,但已具备可扩展性,未来可通过Redis持久化、消息队列联动及医疗安全机制完善,应用于慢病管理、辅助决策等场景,推动AI在医疗流程中的落地应用。

Joey 的工作空间~ 788

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

SSD测试工程精通系列 17|TRIM与UNMAP洪峰下的GC竞争(命令风暴与后台任务调度)

本文深入探讨NVMe SSD在面临TRIM/UNMAP命令洪峰时,后台垃圾回收(GC)与前端IO的竞争机制。从协议解析、固件调度、硬件架构到物理层信号,全面剖析命令风暴对QoS和WAF的影响。结合Samsung、Micron、Kioxia等厂商实测数据与失效案例,提供从测试注入、仪器抓取到工程取舍的全链路验证方案,助力资深测试工程师攻克存储性能断崖难题。

专注分享DPU、RDMA智能网卡/SSD(固态硬盘)产品测试与优化 350

基于 YOLOv8 的森林火灾检测系统(Web 版)

本项目面向林区早期火情识别场景,使用YOLOv8完成火焰(Fire)与烟雾(Smoke)两类目标的检测模型训练,并以FastAPI构建 Web 检测平台,把模型能力封装为可直接登录使用的系统。平台除常规的图片、批量、视频、摄像头检测外,还提供同图多权重对比、数据集浏览与标注核对、模型热切换,以及把训练搬到网页上的能力:可在浏览器配置超参数发起真实训练,训练中在线调整学习率、查看进度与动态曲线,训练完成后下载产物或直接应用到检测。

Michael_Jay的博客 71

HTML5 History API 详解:前端路由底层原理

pushState改 URL 不刷新popstate接浏览器导航服务端必须兜底 SPA 入口前端路由的本质不是“魔法”,而是:把「URL 字符串」变成「组件渲染函数」的映射表,再让浏览器历史栈和这张表保持同步。

2603_94941239的博客 224

身份验证漏洞专题(三):持久登录、密码重置与密码修改中的凭据绑定缺陷

密码登录与双因素认证是身份验证的主干流程,但一个完整的认证体系还依赖三类辅助机制:持久登录("记住我")、密码重置、密码修改。这三类机制的共同特征是:它们同样携带或验证凭据,同样直接决定认证状态的归属,但实现时获得的防护强度往往远低于登录页面本身。攻击者绕不开登录接口时,常常可以从这些辅助入口进入。

2401_85321170的博客 654

2026 年前端框架排行榜

前端框架是用于构建用户界面的工具集合,通过预设组件、网格系统和样式规范提升开发效率与可访问性。2026年主流框架包括:React(生态领先,适合全栈)、Next.js(SSR/SEO优化,主流选择)、Vue(学习友好,中小团队首选)、Angular(企业级稳定)、Svelte与Astro(性能突出)。趋势显示,服务端渲染、TypeScript、AI工具融合及轻量化成为关键方向。就业建议:优先学React+Next.js;追求易用选Vue;企业级项目可学Angular;追求极致性能可尝试Svelte或Astr

lxttzlove的博客 317

Vue 前端开发 AI 对话页面:流式消息渲染、文件上传

关键点是不能手动设置 Content-Type 为 multipart/form-data,必须由浏览器自动生成带有 boundary 的请求头,否则后端无法解析。思路:将对象序列化为 JSON 字符串,作为 FormData 的一个普通字段(如 formData.append(‘payload’, JSON.stringify(data))),后端接收该字段后再反序列化。若上传大文件(>10MB),需实现独立的分片上传接口,在提交对话前先获取文件 id 或 url,再随文本发送引用。移除输入框的禁用态;

2402_85729970的博客 400

前端要加密手机号,密钥却不能下发:一次一密的 ECDH + HKDF 方案(十六)

前端加密手机号需避免密钥暴露,采用ECDH协商临时密钥,结合HKDF派生并绑定协议上下文,使用AES-GCM实现认证加密。关键在于两端参数严格一致:曲线、编码格式、盐值与info字段逐字节相同。避免直接哈希共享秘密或日志泄露密钥,服务端返回临时公钥并签名,前端先验签再派生密钥,确保前向安全与防中间人攻击。最终密文结构包含公钥、nonce、密文与认证标签,支持自校验。

tantan的小记录 410

浏览器端素材压缩与上传实践:从 Canvas 到 WebCodecs 与 FFmpeg 回退

本文介绍浏览器端素材上传的完整处理链路,重点解决图片与视频超限问题。图片通过Canvas等比缩放与质量压缩,逐级优化至2MiB内;视频则优先使用WebCodecs硬件编码,结合分辨率降级、码率预算与FFmpeg WASM回退,确保在20MiB内完成转码。强调“先确认后处理”原则,避免无谓资源消耗,并通过多层能力检测保障兼容性与性能。核心思想:压缩成功 ≠ 上传成功,需独立校验。

林恒的博客 369

Geejing WebBuilder AI SQL:一句话生成查询的完整链路与「生成不执行」边界

企业里真正卡住数据核对的,很少是「不会写 SQL」。更常见的是三件小事叠在一起:这张表到底叫什么、日期字段是 `DATE` 还是字符串、当前这套库分页该用 `LIMIT` 还是别的写法。一个熟手要先翻一遍表结构,生手干脆把需求丢给 DBA,一来一回半天就过去了。

m0_60539919的博客 266

从一次检测到持续验证,重新认识 Web 应用安全测试

围绕漏洞修复后再次出现的问题,结合 Burp Suite DAST 与 GraphQL 示例,解析周期检测、证据管理和整改复测的实现思路。

m0_75220675的博客 337
下一篇: Arch 150 Problem Set 1: SF MoMA
wx__codinghelp
博客等级 码龄2年 514粉丝 61原创
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值