ELE00152M Practical Robotics

ELE00152M Practical Robotics for MSc Assessment 2024/25R ELE00152MPracticalfusedhed。 阅读详情

School of Physics, Engineering and Technology

ELE00152M Practical Robotics for MSc Assessment 2024/25

Summary Details

This assessment (Construction of a Navigating Mobile Robot) contributes 100% of the assessment for this module.

Clearly indicate your Name on every separate piece of work submitted.

Submission is via VLE and is due by 12:00 on 13 January 2025 (Semester 1 Common Assessment Period, Monday) as found on the Statement of Assessment. Please try and submit early as any late submissions will be penalised. Assessment information including on late penalties is given in the Statement of Assessment.

Construction of a Navigating Mobile Robot

You are required to create a robot that can map and efficiently make its way through an indoor   environment.  You will also need to prepare and deliver a 5-minute presentation on your robot design and the algorithm you have implemented for navigating and obstacle avoidance.  Test mazes will be available with which you can develop and improve your algorithms, but one of the mazes that your robot will be evaluated on will not be revealed until the demonstration session after the assessment submission.  This will also test the generality of your approach.

First, you will need to build a differential-drive robot with a camera that can find its way through  a maze-like environment.  You have the use of the York Robotics Laboratory Kit that includes a chassis with motor and camera mounts, a Raspberry Pi 4, an Arduino Robotics Board (ARB) that provides easy-to-use sensor and actuator interfaces, a Pololu TB6612FNG dual motor driver, a set of infrared and ultrasonic range sensors, a set of micro-metal gear motors with encoders, wheels that fit on the motors, and other parts that can be used for constructing a small mobile robot..  To assemble and program your robot please refer to the laboratory documentation and resources for assembly guidance and tips.

You are permitted to customize your robot as much as you want as time permits before the assessment.  You can change the body design and add additional microcontrollers, actuators, sensors, and other components from those available in the robot laboratories to improve the performance of your robot.  However, you must ask the technical staff for access to additional components beyond those available in the robot kit and fabrication of additional parts beyond those required for basic functionality, and your final robot must conform to any and all safety or cost requirements imposed by the technical staff to be eligible for credit in the demonstration.  The project is split into four phases plus a presentation and demonstration of your robot’s performance, and the practical lab sessions during the module are designed so as to be part of your work in completing this navigating robot, so it is important that you complete all of the lab exercises.  Please note that your program code must be submitted along with other materials and is part of the assessment grading, so make sure to adhere to good coding practices: comment your code so as to be clear and easy for others to understand, and if you have used code from other sources e.g. github or online forums include complete references to where you obtained the code in your comments as well.

A navigable course environment with ArUco tags and geometric tags with different shapes and colours will be set up in the P/T/410 Robot Lab for your use.  An example layout of a course with tags of various kinds to aid in navigation is provided in Figure 1 below.  You are expected to show your robot's performance on both the course provided as an example in the module laboratory sessions, and also a new course which will not be available until the assessment demonstration date.  Your robot’s build quality and performance and your presentation together will be assessed after the hand-in date and graded out of 100 points.

Phase 1: Construction of a Differential-Drive Robot Chassis

You will need to construct a mobile robot chassis using the kit materials on which to mount the Raspberry Pi and electronics, battery pack, two motors, and a camera.  The quality and functionality of your robot chassis will be assessed at the demonstration after submission and will constitute 20% of the assessment grade, broken down into 10% for assembly (the robot is a clean build and does not fall apart) and 10% for functionality (the robot moves as desired and does not appear to have any incorrect or nonfunctional build elements).

Phase 2: Localization using Machine Vision

You will need to write a vision algorithm to allow your robot to navigate through an indoor environment.  The more information you can gather about the environment with respect to the  robot and the speed of the robot, the better your navigation will perform, so it is suggested that you use the range sensor fused in concert with the camera to predict where obstacles are.  The accuracy and real-time capability of your vision algorithm will be assessed in the presentation and demonstration and will constitute 20% of the assessment grade, broken down into 10% for  accuracy of sensing (things are where they are predicted to be) and 10% for quality of coding    and capability (well thought out use of algorithms/libraries with some originality in your process, runs fast enough to enable navigation, and provides data in a useful format).

Phase 3: Robot Control and Navigation

You will now need to write a controller that uses the camera and range sensor to travel from a start point to a destination point.  Your navigation will need to use wheel odometry, visual, and range feedback to increase accuracy.  You should also track the approximate locations of objects found by your vision system in a graph, map, or other structure for later use in planning.  You can use any algorithm you feel is appropriate from the course content.  The performance of your controller in traveling between the start and endpoints in the environment will be assessed in the presentation and demonstration and will constitute 20% of the assessment grade, broken  down into 10% for the quality of the control of your robot and 10% for the quality of code, clarity  of writing/commenting, and originality of your algorithm.

Phase 4: Mapping and Optimal Path Planning

The last task for your robot control system will be to traverse a path back to the start point, but this time by using an optimal path automatically determined by analyzing the map that your controller has generated on the way there.  The speed and accuracy with which your robot traverses optimal path back through the maze will be assessed in the presentation and demonstration and will constitute 20% of the assessment grade, broken down into 10% for optimality and efficiency of the path found and traversed (is it a good solution?), and 10% for the quality of critical thinking, originality, and practical implementation of your optimal path following algorithm.

Phase 5: Presentation and Technical Assessment

A presentation and demonstration session will beheld shortly after the hand-in date.  You will need to present your design and approach that you have implemented in a 5 minute presentation per person with 2 minutes for questions afterwards.  The performance of your robot and navigation will be assessed in a demonstration session following the presentation.

Your presentation will constitute 20% of the assessment grade, broken down into 5% for presentation quality (slide visuals and organization), 5% for ambition (the complexity and depth  of thought into your approach), and 10% for technical quality and critical thinking (algorithm and robot appropriate, algorithm implemented correctly, good design methods employed).

Deliverables:

To receive full credit in this assessment, you must submit the following items in a single .zip file, to the “Assignment Submission Point” provided on the module VLE site, by the  deadline date and time given on the cover sheet of this assessment:

.    Functioning and commented code files for performing visual localization in Phase 2

.    Functioning and commented code files for performing control and navigation in Phase 3

.    Functioning and commented code files for performing mapping and planning in Phase 4 .   Your presentation slides for the presentation in Phase 5

You must also give your presentation and demonstrate the following on the mobile robot in the

final presentation and demonstration which is scheduled after the deadline date above. 

.    Basic movement of the mobile robot forward, backward, and turning left and right

.   Visual identification and localization of objects with estimated position

.   Autonomous navigation of the robot around obstacles to a goal using sensors

.    Mapping of obstacles and navigation of the robot back to the start using path planning

Feedback template attached.

(1)

Figure 1: Example layout for a maze-like obstacle course for mobile robot

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情

相关推荐

从D3 00到FF FF:手把手解析RTCM3.2协议帧结构(附Python解析代码)

本文深入解析RTCM3.2协议帧结构,从同步头标识到CRC校验算法,详细讲解如何通过Python代码实现二进制数据解析。文章包含完整的RTCM3.2解析器实现,涵盖消息类型解码、CRC校验等关键步骤,并附赠特定消息类型(如1005型基准站坐标)的解析示例,帮助开发者快速掌握GNSS差分数据传输协议的核心技术。

weixin_42550052的博客 354

InnoDB 内存结构总览:Change Buffer、AHI 与 Log Buffer

本文系统梳理InnoDB内存结构中的ChangeBuffer、Adaptive Hash Index(AHI)与LogBuffer。ChangeBuffer缓存二级索引页不在内存时的变更,减少随机IO,仅在页加载时合并;聚簇索引修改立即执行,因数据本身不可延后。AHI基于高频等值查询自动构建哈希索引,加速定位,仅支持等值操作。LogBuffer为redo log内存缓冲,配合磁盘日志实现崩溃恢复。三者均服务于性能优化,其中ChangeBuffer与AHI共享BufferPool空间,而LogBuffer独立

bksczm的博客 310

基于ROS2的实时视频流转换:image2rtsp在多路相机采集中的应用

本文详细介绍了如何在ROS2机器人系统中使用image2rtsp工具,将ROS2内部的相机图像话题实时转换为标准的RTSP视频流。重点阐述了其安装配置、核心参数调优,并提供了多路相机采集的实战方案,解决了机器人视觉数据跨平台、跨网络分发的难题,极大提升了视频流集成的部署效率。

weixin_29214559的博客 397

信创环境下PageOffice文档控件适配与实践

信创适配做到文档控件这一层,拼的已经不是"有没有国产版本",而是同一个功能在两类终端上是否真的等价。等价的标准很具体:同一次点击能得到同样的结果,同一份公文能得到同样的版式,同一个项目不需要维护两套代码。这背后是三件并不轻松的工作:服务端用一套接口同时支撑两类终端,客户端把两种系统与四种芯片的安装包分发清楚,文档内核层由产品侧跟着 WPS 的版本走。浏览器这一层的压力,则被收进了产品自己的窗口里——升级节奏由产品掌握,不再交给运气。

zi_wu_xian的专栏 336

学习记录-Simpack生成车轮不圆的几种示例

单阶、多阶和实测车轮多边形的添加教程

weixin_51965897的博客 3707

实战分享:如何利用svchost进程绕过360防护(附完整Shellcode注入教程)

本文深入解析系统进程安全防护机制,探讨svchost等关键进程的安全特性与防护策略。详细分析安全软件的行为检测和内存保护技术,提供系统加固与监控实践建议,助力企业构建多层次防御体系,有效应对潜在安全威胁。

weixin_30752699的博客 100

第三篇 第 6 课

前置:第三篇第 1 课(stdx 引入),第二篇第 1 课(std.regex)。环境:仓颉 SDK 1.2.0。本文所有代码与输出均逐行实测。

weixin_41618057的博客 557

跟着团子学SAP PS:WBS BOM的实际应用价值 CS71/CKW1/CKW4

过往在参与很多项目实施的时候有很多顾问都会提到WBS BOM是否要启用,但仔细聊下来会发现大部分人对WBS BOM的真正功能以及实际应用场景并不是非常了解,因为WBS BOM的实际应用场景非常有限,大部分情况下基本都可以不用考虑启用WBS BOM。 WBS BOM和普通BOM的核心区别是多了一个WBS元素编码的维度,也就是说同一个成品料号可以基于不同WBS元素编码设计不同的BOM主数据。 所以从本质而言WBS BOM真正解决的问题只是减少成品物料的物料编码,比如一个项目中生产2个同型号的控制柜,但两个控制柜

Lucas1211的博客 6308

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 616

ABAP Channels 之 WebSocket 通信实践:用 ABAP Push Channel 打造实时应用

摘要:本文介绍了ABAP Push Channel(APC)技术,它通过WebSocket协议实现ABAP系统与外部客户端的实时双向通信。文章对比了传统HTTP轮询与WebSocket的差异,解释了APC的事件模型及其接口演进(从IF_APC_WS_EXTENSION到IF_APC_WSP_EXTENSION)。通过仓库拣货等实际案例,展示了APC在企业级应用中的价值,如实时监控、协作场景等。文中还详细阐述了ABAP引擎中WebSocket的交互模型,说明其资源优化设计原理,并提供了基础代码示例。该技术解决

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 299

Transformer模型详解

​本文主要介绍Transformer系列,从基础到理论,对注意力机制进行总结并解释《Attention is all you need》,提出解决sequence to sequence问题的transformer模型,用全attention的结构代替了lstm,抛弃了之前传统的encoder-decoder模型必须结合cnn或者rnn的固有模式,只用attention。文章的主要目的是在减少计算量和提高并行效率的同时不损害最终的实验结果。

专注大数据与人工智能技术分享,欢迎私信加群互相学习! 5326

pcl2启动器下载(Minecraft PCL2 启动器 最新版 安装与使用说明)

摘要:PCL2(Plain Craft Launcher 2)是一款面向 Minecraft 的第三方启动器,支持正式版与快照版本管理、模组与整合包安装、Java 运行时自动匹配,绿色免安装、双击即可运行。适合在 Windows 上玩单机整合包、需要多版本共存或离线启动的用户使用

2611_96675819的博客 226

uniapp [全端兼容] - 详细实现全局修改设置字体大小功能效果,统一修改页面字号字体大小,一键改变字号整个项目立即生效,大中小字号预设、老年人大字模式场景,uniApp全平台兼容控制页面字号大小

uni-app,h5移动端网页,微信小程序,支付宝小程序,Android安卓,苹果ios,app,nvue,修改字体大小,一键调整UniApp字体大小,实时改变不用刷新,动态设置字体大小,uniapp全局修改字体字号大小,如何控制全局字号,可调整显示的字体,全项目生效,老年人大字模式,改变所有页面的字体,全局设置字体大小,实现小中大的字体切换,设置改变全局字体大小功能,如何做到全平台兼容,H5APP实现全局字体大小调整,不兼容报错,用户设置字号,全局设置应用字体大小,大中小字体修改,页面设置page-me

🏆 前端领域优质创作者 1万+

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 239

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

Java 集合容器高频面试题全解:HashMap 树化阈值、1.7 死循环与 ConcurrentHashMap 演进(2026 招聘 JD 真题复盘)

HashMap 树化阈值 8 的泊松分布依据、退化阈值 6 的防抖设计、JDK 1.7 头插成环死循环的排查与修复、1.8 尾插后为何仍线程不安全、ConcurrentHashMap 放弃分段锁的原因与 ForwardingNode 协作扩容、computeIfAbsent 死锁陷阱、大集合找重复的场景题选型,附三层追问链自测。题目来源为 38 期公开招聘 JD 样本与字节、拼多多、建行、美团、快手公开面经。

蒙眼过河 427

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

spdlog 同步日志库使用详解

spdlog是一个轻量级 C++ 日志库,支持同步日志、异步日志、多线程日志、日志文件轮转和自定义日志格式。对于嵌入式 Linux 应用开发,我建议先使用。它可以帮我们完成:日志级别过滤。时间戳和线程 ID 输出。日志格式化。终端和文件输出。多线程安全写入。日志文件按大小或时间轮转。我们不需要自己实现互斥锁、文件写入、日志格式化和轮转等底层功能。

zengjiajun2006的博客 1124

LinePhone3.2.7(android端最新版本) sip客户端

SIP客户端For android:LinePhone3.2.7(最新版本),官网地址:http://www.linphone.org/

JavaSE通关手册:数据类型与变量

代码无需额外处理,编译时编译器自动完成转换。

xys_678的博客 236

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 185

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 194

动态代理两大流派:JDK 代理与子类代理

业务类想加日志,最直白的写法是侵入式修改: 问题很明显:每个方法都要改一遍,改一个业务要动十处。代理模式的解法是:调用方不直接依赖 ,而是依赖一个代理对象。代理对象长得跟目标一模一样,调用它 → 代理先执行增强逻辑 → 再转调真实对象。 关键在于:代理对象的类型是哪来的?这就是"动态"二字的含义:代理类在运行时才诞生。两个角色: 承载增强逻辑, 负责生成代理类。 组装代理并调用: 输出: 业务代码 一行没动,增强逻辑全在 里。这就是 AOP 的味道。 内部四步: 第 2 步 内部:先查 (同一个接口

Android的专栏 662

C++20协程怎么运行?原理与三大核心组件深度剖析

C++20协程是轻量级的无栈状态机,通过co_await、co_yield、co_return实现挂起与恢复,由Promise、协程句柄和Awaitable三大组件协同工作。协程与线程互补,适用于高效管理大量并发I/O任务,显著降低上下文切换开销。其核心在于编译器生成的状态机机制,需配合库(如cppcoro)使用。掌握Promise控制逻辑、句柄生命周期管理及Awaitable语义,是构建高性能异步程序的基础。

Lucis__的博客 336

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 169

TRingBuffer两端都能增删(快递站版)

TRingBuffer 是一个支持两端增删、下标访问且容量动态增长的环形双端队列。它通过无符号索引的永不归零设计,利用减法自动模运算实现空满判断与元素计数,避免了传统环形缓冲浪费格子的问题。内部以票号(索引)标记首尾,扩容时重排元素为连续存储,保证 O(1) 操作与高缓存效率。虽不线程安全,但其高效性使其成为游戏开发中事件队列、命令缓冲等场景的理想选择。

u013768914的博客 315

Teamcenter Java SOA 开发:连接、查询与保存

本文介绍如何通过 Java 调用 Teamcenter SOA 接口实现外部系统对接,涵盖连接登录、查询保存等核心操作。以最小闭环示例展示 Connection、Service、ModelObject 等关键组件的使用,强调错误处理与事务管理要点。梳理了 DataManagement、Query、File Management 等 API 模块分工,并结合“工作移交WebService”案例,说明幂等性设计与流程状态返回的重要性。适用于 Web 门户、ERP 集成等场景,建议批量操作用 bulk 接口优化性

软件工程师文艺 277

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 70

Mac上装了最新版本的Android Studio,但是没找到jdk的设置选项也没找到jbr的目录

新版Android Studio(2025.3.1+)因三项变更导致常见问题:一、JDK设置移至“DaemonJVM criteria”,新项目默认自动探测或下载JDK;二、JBR目录改名为带版本号的jbr-21等,需进入.app/Contents/查看,或通过About窗口确认运行时;三、命令行缺adb因platform-tools未加入PATH,需在SDK Manager中勾选并配置~/.zshrc中的ANDROID_HOME及PATH。重装或清理残留可解决缺失问题,切勿手动设JAVA_HOME或安装冲

Programming is a highly artistic endeavor 400
上一篇: command-line argument
下一篇: Principles & Methods of Epidemiology
wx____codehelp
博客等级 码龄2年 538粉丝 99原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值