Ubuntu配置ip地址、bond绑定

配置ip地址

vi /etc/netplan/00-installer-config.yaml
network:
  ethernets:
    eno1:
      addresses:
        - 192.168.1.3/24
      routes:
        - to: default
          via: 192.168.1.1
      nameservers:
        addresses: [223.5.5.5]
  version: 2

配置bond绑定

network:
  ethernets:
    eno1:
      dhcp4: true
  version: 2
  
  
  ethernets:
    ens8f0: {}
    ens8f1: {}
  version: 2
  renderer: networkd
  bonds:
    bond1:
       addresses: [192.168.1.103/24]
       gateway4: 192.168.1.1
       interfaces:
       - ens8f0
       - ens8f1
       parameters:
          mode: 802.3ad
          mii-monitor-interval: 100
          lacp-rate: fast
          transmit-hash-policy: layer3+4

当然你也可以用network-manager来进行配置ip地址

apt install network-manager
cd /usr/lib/NetworkManager/conf.d/
mv 10-globally-managed-devices.conf 10-globally-managed-devices.conf.bak
cp 10-globally-managed-devices.conf.bak 10-globally-managed-devices.conf
sed -i '/unmanaged-devices/s/$/&,except:type:ethernet/' 10-globally-managed-devices.conf
systemctl restart NetworkManager
nmcli device status

然后就显示出失败的结果，你需要进一步开启：

 nmcli device set enp0s3 managed true

完成后就可以配置ip地址了。

示例：

nmcli con modify enp0s3 ipv4.method manual ipv4.addresses  192.168.3.66/24 ipv4.gateway 192.168.3.1 ipv4.dns 114.114.114.114 autoconnect yes

关于细致的使用方法,可以参考redhat官方文档：

https://docs.redhat.com/zh_hans/documentation/red_hat_enterprise_linux/8/html/configuring_and_managing_networking/

 

以上仅供参考，更新不定时，未回复就是在加班给各位大佬们装机器