SWEN30006_2024_SM2 Specification for Automail

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情

Project 1: Specification for Automail: Software Modelling and Design (SWEN30006_2024_SM2)

Project 1: Specification for Automail

Background: Automail

Delivering Solutions Inc. (DS) has recently developed and provided a Robotic Mail Delivery system called Automail to the market. Automail is an automated mail sorting and delivery system designed to operate in a large building that has a dedicated mail room. The system offers end-to-end receipt and delivery of mail items within the building and can be tweaked to fit many different installation environments.

The current version of the system supports delivery of letters using one specific delivery mode  where every robot operates with the same behaviour. DS would like the system to also handle parcel delivery, and to support exploring alternative delivery modes which specialize the robot  behaviour.

The Automail System

The building the system operates in (see Figure 1) will have a number of floors each with the same number of rooms. Below the rooms is a mailroom (row 0), to the left and right are robot tracks (column 0 and column roomsperfloor+1) respectively. 

Figure 1: Automail Building Layout (6 floors by 5 rooms) with Robots

The mail items are letters which are effectively weightless, or parcels which have a given weight. All mail items are addressed to deliver within the building to an room identified by combination of Floor and Room number.  The current system handles only delivery of letters.

The Automail system consists of two key components:

·  A MailRoom subsystem which holds mail items after their arrival at the building’s mail room. The mail roomdecides the order in which mail items should be delivered.

·  Delivery Robots which take mail items from the mail room, or from other robots, and deliver them throughout the building. The currently used robot (see Figure 2) has a backpack-like container for carrying mail items. Carrying capacity of the robot is weight limited. As such the total weight of carried items cannot exceed robot.capacity.  An installation of Automail can manage a team of delivery robots of configurable size.

Figure 2: Artistic representation of one of the DS robots

DS provides a simulation subsystem to show that Automail can operate to deliver mail items within the building. The subsystem runs a simulation based on a property file, generates an output trace of execution and outputs the average time to deliver a mail item.

The simulation subsystem uses a clock to simulate operations of the mail room and robot subsystems. Broadly speaking, for each tick of the clock (i.e. one unit of time), the mail room subsystem will load items to a robot if there are robots available at the mailroom; and the robots will either move to deliver an item (if there are items in their backpack), deliver an item, or move to return to the mailroom (if all items are delivered). Currently, the robots offered by DS will take one unit of time when

·  moving one step (i.e., moving up or down one floor in a building, or left or right one across the building).

·  delivering items at one apartment once there.

·  transferring items from one robot to another.

·  being loaded and moved out of the mailroom.

The simulation completes only after all items have been delivered.

Unfortunately, the staff who designed and implemented the Automail simulation did not consider maintainability and future enhancements.

Current operating mode: Cycling

This mode has been implemented in the current simulation.  It has the robots moving clockwise through the building delivering mail items, as illustrated in this video (https://canvas.lms.unimelb.edu.au/media_attachments_iframe/20429677? type=video&embedded=true) .

The Cycling mode (MODE=cycling) has every robot operating with the same behaviour. All items a robot carries for delivery will only ever be for a single floor at a time.

Initially: All robots (robot.number>0) start in the MailRoom.

Ongoing (each timestep):

1. If there are any items and robots in the mailroom, the mailroom will Load a robot with items for one floor (the floor with the earliest remaining delivered item), and move it to the bottom left (0, 0).

2. If a robot has items to deliver and has not reached its target floor, it will Step up.

3. If a robot has an item to deliver it will Step towards the left-most location to which its items are addressed.

4. If a robot has reached its delivery location and not yet delivered, it will Deliver.

5. If a robot has no items to deliver, it will Step towards the bottom right (0, building.roomsperfloor+1).

6. If there is a robot at bottom right (0, building.roomsperfloor+1), it will Return to the mailroom.

You can assume that the Automail Cycling mode has been well tested and performs reasonably well,though only for letters.

Proposed operating mode: Flooring

This mode has not been implemented in the current simulation; you and your team need to add this.  It involves having one robot per floor delivering on that floor, with two robots (one at each end) bringing mail items up to the other robots for delivery, as per this video (https://canvas.lms.unimelb.edu.au/media_attachments_iframe/20429779? type=video&embedded=true) .

The Levels mode (mode=FLOORING) always involves exactly building.floors+2 robots

·  one for each floor, each of which exhibits floor behaviour, and

·  one for each of the leftmost and rightmost columns, each which exhibits column behaviour.

Floor robots only ever move on their floor and column robots only ever move on their column and in/out of the mailroom.

Floor Behaviour:

·  Initially: the robot is at Room 1 on their floor. ·  Ongoing (each timestep):

1. If the robot has mail items, continue delivering them (ignore column robots).

2. If the robot is next to a waiting column robot (i.e. with items for this floor), Transfer them from the column robot to this robot and start delivering from that end of the floor towards the other end. (Note: as all robots have the same capacity and the floor robot is carrying nothing, all items will be transferable.)

3. If the robot is heading for a waiting column robot, continue moving towards that robot.

4. If a column robot is newly waiting, start heading towards it.  If two column robots are    newly waiting, move towards the one with the earliest arrival item, or the left one if the and Design (SWEN30006_2024_SM2) arrival time is the same.

5. If the robot has no items and no column robots are waiting for this floor, then do nothing. Column behaviour:

·  Initially: the robot is in the mailroom and is assigned to the left or right column (one robot to each).

·  Ongoing (each timestep):

1. If the robot is in the mailroom and the mailroom has items, Load the robot (as per Cycling) and move it to its floor 0, otherwise do nothing.

2. If the robot is loaded for delivery, and not at the destination floor move towards the destination floor.

3. If the robot is at the destination floor, and the floor robot is adjacent, Transfer from this robot to the floor robot.

4. If the robot has transferred, head towards floor 0.

5. If the robot arrived back at floor 0, enter the mail room.

All items a robot carries for delivery will only ever be for a single floor at a time. Robot Operations:

·  Step: move one floor or apartment towards the destination.  Only one robot can be on a square at a time. If the destination square is blocked, the robot does nothing.

·  Load: the load destination is the floor of the item in the mailroom with the earliest arrive

time. Load the robot with all items destined for that floor which can be transferred to the destination robot, subject to load.  All letters are transferred, and parcels are transferred in order of "earliest arrival time package which will fit within weight capacity".

·  Transfer: all items which can be transferred are move from the source robot to the

destination robot, subject to load.  All letters are transferred, and parcels are transferred in order of "earliest arrival time package which will fit within weight capacity".

·  Return: all items are transferred from the robot back to the mailroom.

·  Deliver: the item is removed from the robot and the elapsed time since arrival used in the item statistics.

Your Task

To expand the usage and trial different modes of operation, DS wants to update their Automail to support (1) parcels, and (2) the FLOORING operating mode.

The Base Package

You have been provided with a zip file containing source code for  the current version of the system, including an example property file.

(https://canvas.lms.unimelb.edu.au/courses/187398/files/20444343?wrap=1)  

(https://canvas.lms.unimelb.edu.au/courses/187398/files/20444343/download?download_frd=1)

This provides the basis for you to implement the additions described above.

Please carefully study the provided code and ensure that you are confident you understand  how it is set up and functions before continuing. Note that you do not need to understand all aspects, just those relevant to the changes you need to make. If you have any questions, please make use of the discussion board.

Note: The simulation will run and generate mail items at random times and with random weights, based on a seed. You can configure this in the property file (test.properties by default). Any integer value will be accepted, e.g. 30006.

Configuration and Project Deliverables

(1) Extended Automail: As discussed above, and for the users of Automail to have confidence that changes have been made in a controlled manner, you are required to preserve the Automail simulation’s existing behaviour. Your extended design and implementation must account for the following:

·  Preserve the existing behaviour of the system for configurations where the additional

capabilities are turned off in the configuration file (properties), i.e. mail.parcels=0 and

MODE=cycling.  Note that “preserve” implies identical output. We will use a file comparison tool to check this.

·  Add the handling and delivering behaviour for parcels (including robot capacity limitation). ·  Add the new FLOORS mode of delivery.

·  Configurable building size and number of robots (robot.number for cycling mode or building.floors+2 for flooring mode).

It's recommended that you understand the high-level design of current system so that you can effectively identify and update relevant parts. You don't need to refactor the whole system, just those parts necessary or helpful to making the required changes.

(2) Report: In addition to the extended Automail, DS also wants you to provide a report to document your design changes and justification of your design. You should also comment on how easy your changes make it to add further mail items (beyond letters and parcels), or further delivery models (beyond cycling and flooring) in the future.  Your report should include:

·  a design class diagram which shows all of the changed design elements in your submission (at least - it can show more than just the changes but doesn't need to show all unchanged elements).

·  a design sequence diagram which illustrates the behaviour of a floor-assigned robot in FLOORING mode, for appropriate scenario of your choosing.

More detail of the report is available on the LMS submission page.

Note: Your implementation must not violate the principle of the simulation by using information that would not be available in the system being simulated. For example, it would not be appropriate to use information from the simulation package (e.g., mail items which have not yet been delivered to the mail room). We also reserve the right to award or deduct marks for clever or very poor code quality on a case-by-case basis outside of the prescribed marking scheme.

python-snap7 报错:can‘t find snap7 library. If installed, try running ldconfig 1、使用场景: Python 读取西门子 S7 系列 PLC 信息,会用到 snap7 库,网上也有很多案例。但是,运行时会报错:can't find snap7 library. If installed, try running ldconfig 2、解决方案: A、下载项目需要依赖的 dll、lib 文件: i、Sourceforge下载:https://sourceforge.net/projects/snap7/files/ ii、优快云下载(免费):https://dow. 阅读详情

相关推荐

慕课软件质量保证与测试(习题集)

慕课金陵科技学院.软件质量保证与测试.期末复习.习题汇总0 总目录1 绪论1.1 软件质量保证与测试的产生与发展1.2 软件缺陷,软件错误,软件故障1.3 软件质量保证与测试的意义,原则和挑战1.4 单元测试1.5 课后作业2 软件测试策略2.1 软件测试的模型,过程和生命周期2.2 软件测试的方法和技术2.3 单元测试2.4 课后作业3 黑盒测试3.1 黑盒测试概述3.2 等价类划分测试3.3 边界值测试3.4 错误推测法3.5 判定表驱动法3.6 因果图法3.7 场景法3.8 正交实验法3.9 单元测试

weixin_42473228的博客 5万+

InnoDB 内存结构总览:Change Buffer、AHI 与 Log Buffer

本文系统梳理InnoDB内存结构中的ChangeBuffer、Adaptive Hash Index(AHI)与LogBuffer。ChangeBuffer缓存二级索引页不在内存时的变更,减少随机IO,仅在页加载时合并;聚簇索引修改立即执行,因数据本身不可延后。AHI基于高频等值查询自动构建哈希索引,加速定位,仅支持等值操作。LogBuffer为redo log内存缓冲,配合磁盘日志实现崩溃恢复。三者均服务于性能优化,其中ChangeBuffer与AHI共享BufferPool空间,而LogBuffer独立

bksczm的博客 310

ThingsBoard入门实战(七):公共发布和 UI 细节修改

公共发布和 UI 细节修改7.细节修改和公共发布一、公共发布二、UI优化下载运行修改三、下一步还可以做什么?更好的UI更丰富的系统模块 7.细节修改和公共发布 GET到新技能了,想给兄弟们演示,需要给他们每个人一个账号么? 答案肯定是:不需要! ThingsBoard 用 公共发布 解决了这个问题。 一、公共发布 首先我们来看一下路灯设备现在在谁名下? 如下图,路灯都是customerA的, 目前只有它和它的租户可以看到,其他人需要看就需要设为公有。 如图操作: 对于设备详情仪表盘,我们也需要设为公有

AIGC搞起 9124

信创环境下PageOffice文档控件适配与实践

信创适配做到文档控件这一层,拼的已经不是"有没有国产版本",而是同一个功能在两类终端上是否真的等价。等价的标准很具体:同一次点击能得到同样的结果,同一份公文能得到同样的版式,同一个项目不需要维护两套代码。这背后是三件并不轻松的工作:服务端用一套接口同时支撑两类终端,客户端把两种系统与四种芯片的安装包分发清楚,文档内核层由产品侧跟着 WPS 的版本走。浏览器这一层的压力,则被收进了产品自己的窗口里——升级节奏由产品掌握,不再交给运气。

zi_wu_xian的专栏 336

IC设计效率翻倍!Verilog-mode的AUTOWIRE/AUTOINST组合使用技巧

本文详细介绍了在Emacs的verilog-mode插件中,如何组合使用AUTOWIRE与AUTOINST功能,实现Verilog代码的智能自动化连接与维护。通过声明式编程思想,该组合能自动生成模块实例化连接和线网声明,并配合AUTO_TEMPLATE处理复杂映射,从而大幅提升IC顶层设计的效率和可靠性,减少手动连线的错误。

weixin_28826545的博客 320

从0死磕全栈之使用 VS Code 调试 Next.js 应用完整指南

调试目标推荐方式客户端组件VS Code + Chrome 调试器(pwa-chrome中间件(Middleware)同服务端方式静态生成(SSG)逻辑需在next build时调试,建议改用dynamic路由临时测试通过合理配置 VS Code 调试器,你可以像调试普通 Node.js 或前端项目一样,高效排查 Next.js 应用中的各类问题。🐞。

weixin_44058951的博客 1164

第三篇 第 6 课

前置:第三篇第 1 课(stdx 引入),第二篇第 1 课(std.regex)。环境:仓颉 SDK 1.2.0。本文所有代码与输出均逐行实测。

weixin_41618057的博客 557

字符编码——简体中文编码中区位码、国标码、内码、外码、字形码的区别及关系

目录区位码国标码(交换码)内码(机内码)区位码、国际码、内码的转换为什么要加上20H为什么加上80H 本文以GB2312为例,讲述区位码、国标码、内码、外码、字形码 区位码 整个GB2312字符集分成94个区,每区有94个位,每个区位上只有一个字符,即每区含有94个汉字或符号,用所在的区和位来对字符进行编码(实际上就是字符编号、码点编号),因此称为区位码。 换言之,GB2312将包括汉字在内的所有字符编入一个94 * 94的二维表,行就是“区”、列就是“位”,每个字符由区、位唯一定位,其对应的区、位编号合并

路人coder 5346

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 616

【保姆级】联想服务器 Ubuntu 装机:RAID 0/1/5/10 从原理到配置(新手也能一次成)

联想服务器RAID配置指南:Ubuntu系统适配方案 摘要: 联想服务器采用LSI MegaRAID硬件控制器,支持RAID0/1/10/5四种阵列模式。RAID0提供最高性能但无冗余,适合临时数据;RAID1完全镜像确保数据安全,推荐用于系统盘;RAID10兼顾性能与冗余,适合数据库等高要求场景;RAID5平衡容量与成本,适用于文件服务器。配置可通过本地BIOS(Ctrl+R)或XCC远程管理完成,Ubuntu安装时可自动识别虚拟磁盘。注意事项包括:使用同型号硬盘、监控重建进度、避免SSD与机械盘混用等。

2501_93651177的博客 492

Verilog HDL 100道面试题及参考答案

在 Verilog HDL 中,参数(parameter)和宏定义(define)都可用于定义常量,但它们存在诸多不同之处。参数(parameter)是模块内部的常量定义,具有局部性。它在模块内部起作用,不同模块可以有同名的参数,且值可以不同。参数通常用于定义模块的一些配置信息,例如数据位宽、延迟时间等。参数的定义和使用是在模块的作用域内进行的,通过参数传递可以方便地对模块进行配置。endmodule在上述代码中,WIDTH是一个参数,用于定义加法器的位宽。通过改变WIDTH。

大模型大数据攻城狮的专栏 1737

pcl2启动器下载(Minecraft PCL2 启动器 最新版 安装与使用说明)

摘要:PCL2(Plain Craft Launcher 2)是一款面向 Minecraft 的第三方启动器,支持正式版与快照版本管理、模组与整合包安装、Java 运行时自动匹配,绿色免安装、双击即可运行。适合在 Windows 上玩单机整合包、需要多版本共存或离线启动的用户使用

2611_96675819的博客 226

YOLO26-seg分割优化:FPN涨点&轻量化篇 |多级特征融合金字塔(HS-FPN),助力小目标检测

​​​​​摘要:本研究对Ultralytics YOLO26进行了全面分析,重点阐述了其关键架构改进及其在实时边缘目标检测中的性能基准测试。YOLO26于2025年9月发布,是YOLO系列最新、最先进的成员,专为在边缘及低功耗设备上实现高效、精确且易于部署的目标而构建。本文依次详述了YOLO26的架构创新,包括:移除了分布焦点损失(DFL);采用端到端的无NMS推理;集成了渐进损失(ProgLoss)与小目标感知标签分配(STAL);以及引入了用于稳定收敛的MuSGD优化器。

①答疑群聊服务;②YOLO大模型知识问答系统;③计算机视觉论文生成智能体; 283

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 239

IMSL CNL 7.0.0 (x86-64)Crack

IMSL CNL 7.0.0 (x86-64)Crack intel的算法库破解文件,这是C++版本的破解文件

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

Java 集合容器高频面试题全解:HashMap 树化阈值、1.7 死循环与 ConcurrentHashMap 演进(2026 招聘 JD 真题复盘)

HashMap 树化阈值 8 的泊松分布依据、退化阈值 6 的防抖设计、JDK 1.7 头插成环死循环的排查与修复、1.8 尾插后为何仍线程不安全、ConcurrentHashMap 放弃分段锁的原因与 ForwardingNode 协作扩容、computeIfAbsent 死锁陷阱、大集合找重复的场景题选型,附三层追问链自测。题目来源为 38 期公开招聘 JD 样本与字节、拼多多、建行、美团、快手公开面经。

蒙眼过河 427

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

spdlog 同步日志库使用详解

spdlog是一个轻量级 C++ 日志库,支持同步日志、异步日志、多线程日志、日志文件轮转和自定义日志格式。对于嵌入式 Linux 应用开发,我建议先使用。它可以帮我们完成:日志级别过滤。时间戳和线程 ID 输出。日志格式化。终端和文件输出。多线程安全写入。日志文件按大小或时间轮转。我们不需要自己实现互斥锁、文件写入、日志格式化和轮转等底层功能。

zengjiajun2006的博客 1124

大中型超市收银系统(可直接运行)

光步前台收银系统系统功能:商品销售、商品退货、挂单、收银员权限、会员销售、单品取消、整单取消、商品查询、脱机销售、脱机数据上传,基本资料下载,开钱箱、小票打印、收款结算,支持多币种付款方式(现金、储值卡、礼券、微信等),支持多种促销。运行环境:.net 4.0登陆信息用户名:1001 密码:123456内置商品信息,商品编码可输入00001000 - 00010000,测试效果相关功能键F5 结算 F9挂单 F11商品查询 F8退货 Insert单品取消 Del整单取消 F12开钱箱F2 会员 Ctrl+Z退出系统 Home 锁屏 相关源码待公开

JavaSE通关手册:数据类型与变量

代码无需额外处理,编译时编译器自动完成转换。

xys_678的博客 236

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 187

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 194

动态代理两大流派:JDK 代理与子类代理

业务类想加日志,最直白的写法是侵入式修改: 问题很明显:每个方法都要改一遍,改一个业务要动十处。代理模式的解法是:调用方不直接依赖 ,而是依赖一个代理对象。代理对象长得跟目标一模一样,调用它 → 代理先执行增强逻辑 → 再转调真实对象。 关键在于:代理对象的类型是哪来的?这就是"动态"二字的含义:代理类在运行时才诞生。两个角色: 承载增强逻辑, 负责生成代理类。 组装代理并调用: 输出: 业务代码 一行没动,增强逻辑全在 里。这就是 AOP 的味道。 内部四步: 第 2 步 内部:先查 (同一个接口

Android的专栏 662

C++20协程怎么运行?原理与三大核心组件深度剖析

C++20协程是轻量级的无栈状态机,通过co_await、co_yield、co_return实现挂起与恢复,由Promise、协程句柄和Awaitable三大组件协同工作。协程与线程互补,适用于高效管理大量并发I/O任务,显著降低上下文切换开销。其核心在于编译器生成的状态机机制,需配合库(如cppcoro)使用。掌握Promise控制逻辑、句柄生命周期管理及Awaitable语义,是构建高性能异步程序的基础。

Lucis__的博客 336

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 170

TRingBuffer两端都能增删(快递站版)

TRingBuffer 是一个支持两端增删、下标访问且容量动态增长的环形双端队列。它通过无符号索引的永不归零设计,利用减法自动模运算实现空满判断与元素计数,避免了传统环形缓冲浪费格子的问题。内部以票号(索引)标记首尾,扩容时重排元素为连续存储,保证 O(1) 操作与高缓存效率。虽不线程安全,但其高效性使其成为游戏开发中事件队列、命令缓冲等场景的理想选择。

u013768914的博客 315

Teamcenter Java SOA 开发:连接、查询与保存

本文介绍如何通过 Java 调用 Teamcenter SOA 接口实现外部系统对接,涵盖连接登录、查询保存等核心操作。以最小闭环示例展示 Connection、Service、ModelObject 等关键组件的使用,强调错误处理与事务管理要点。梳理了 DataManagement、Query、File Management 等 API 模块分工,并结合“工作移交WebService”案例,说明幂等性设计与流程状态返回的重要性。适用于 Web 门户、ERP 集成等场景,建议批量操作用 bulk 接口优化性

软件工程师文艺 277

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 71

Mac上装了最新版本的Android Studio,但是没找到jdk的设置选项也没找到jbr的目录

新版Android Studio(2025.3.1+)因三项变更导致常见问题:一、JDK设置移至“DaemonJVM criteria”,新项目默认自动探测或下载JDK;二、JBR目录改名为带版本号的jbr-21等,需进入.app/Contents/查看,或通过About窗口确认运行时;三、命令行缺adb因platform-tools未加入PATH,需在SDK Manager中勾选并配置~/.zshrc中的ANDROID_HOME及PATH。重装或清理残留可解决缺失问题,切勿手动设JAVA_HOME或安装冲

Programming is a highly artistic endeavor 400
上一篇: BISM7255 UML VendWise Solutions Vending Machines
下一篇: INFS6071 Critical Path Analysis
vx_codinghelp
博客等级 码龄2年 543粉丝 68原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值