墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
4k累计阅读
4k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
Css代码如下
.al-toggle-button{
appearance: none;
-webkit-appearance: none;
position: relative;
width: 52px;
height: 32px;
background: #dfdfdf;
border-radius: 16px;
border: 1px solid #dfdfdf;
android仿ios开关按钮
android仿ios开关按钮
仿ios的SwitchButton 非图片实现
仿ios的SwitchButton 非图片实现 [注意：本资源来自网络，如有侵权，请联系我删除，谢谢。]
HTML/CSS3仿IOS设置开关
基于CSS3的仿IOS滑动开关按钮，可用于网页和WEBAPP的单选按钮，效果超赞！
ios风格的滑动开关
android switchButton ，ios风格的滑动开关
基于线性光耦HCNR200的高压直流采样电路设计与精度优化
本文详细介绍了基于线性光耦HCNR200的高压直流采样电路设计与精度优化方法。针对直流高电压测量中的安全与干扰问题，提出采用HCNR200光耦隔离方案，实现高精度线性传输。文章深入解析电路设计关键细节，包括电阻网络、运放选型、滤波电容配置等，并提供精度优化实战技巧与常见问题排查指南，助力新能源电动汽车和高压储能系统的高压直流采样应用。
集成calibre到cadence virtuoso环境中 load: can‘t access file - “/opt/eda/Mentor/lib/calibre.skl“
项目场景： 设想是将Calibre集成到cadence virtuoso中，但网上的解决办法尝试过在本机上实验都有点问题，因此想记录下来我的解决办法仅供参考。 问题描述： 安装好cadence， calibre之后打开virtuoso，CIW窗口显示 *Error* load: can't access file - "/opt/eda/Mentor/lib/calibre.skl" 问题是出在calibre.skl的加载路径出错，尝试网上的在工程目录下修改.cdsinit文件，添加calibre安装
RouterOS v7.6实战：5分钟搞定IPv6双栈配置（含光猫桥接避坑指南）
本文详细解析了在RouterOS v7.6系统中配置IPv6双栈网络的实战步骤，特别针对家庭网络光猫桥接模式下的常见问题提供了避坑指南。文章涵盖了从基础配置到企业级部署的进阶内容，包括IPv6前缀获取、DHCPv6客户端设置、路由通告以及安全优化，帮助用户充分利用v7.6版本在IPv6支持上的改进与优势。
别再到处找模板了！我用这套软著申请材料（含用户手册+源代码模板）两个月搞定
本文提供了一套高效的软著申请材料模板，包括用户手册和源代码模板，帮助开发者两个月内快速完成申请。通过实战指南和常见误区解析，详细介绍了材料准备的规范与技巧，确保格式合规性，大幅提升审核通过率。
CLion与STM32CubeMX联调：JLink GDB Server高效调试指南
本文详细介绍了如何搭建并配置CLion、STM32CubeMX与JLink GDB Server联调的现代化STM32开发环境。通过一站式环境搭建、工程创建、核心调试配置及高级技巧（如RTT日志），该组合实现了高效的代码编辑、可视化配置与稳定调试，大幅提升嵌入式开发效率与体验。
飞思卡尔16位单片机（二）——CodeWarrior开发环境搭建及新建、调试工程
一、安装CodeWarrior 飞思卡尔16位单片机的开发环境为CodeWarrior5.1，这个软件安装比较简单，软件的安装文件可以从相应的网站上下载。安装CodeWarrior所需要的电脑的硬件资源也比较宽泛，目前一般的电脑都可以满足这个要求，可以支持win10、win7等操作系统。安装过程按照按照软件的提示一步步操作即可。 二、安装USBDM驱动 USBDM是...
matlab RANSAC拟合圆柱【2025最新版】
RANSAC拟合圆柱
【雷达】基于matlab合成孔径雷达干涉测量（InSAR）时序分析【含Matlab源码 9037期】
合成孔径雷达干涉测量（InSAR）时序分析 完整代码，包运行；可提供运行操作视频！适合小白！
IDEA的使用指南
IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
STM32F407中文手册
STM32f407中文手册 本参考手册面向应用开发人员，提供有关使用 STM32F405xx/07xx、STM32F415xx/17xx、 STM32F42xxx 和 STM32F43xxx 微控制器存储器与外设的完整信息。STM32F405xx/07xx、STM32F415xx/17xx、STM32F42xxx 和 STM32F43xxx 构成一个微 控制器系列，各产品具有不同的存储器大小、封装和外设。有关订购信息以及器件的机械与电气特性，请参见数据手册。有关 ARM Cortex™-M4F 内核的信息，请参见《Cortex™-M4F 技术参考手册》。
汉书HE8，好用的汇编代码编写工具
汉书HE8，好用的汇编代码编写工具早期编写汇编代码所用功能强大
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
579
扫一扫
