51、FreeBSD系统升级全攻略

FreeBSD系统升级全攻略

FreeBSD系统提供了两种升级方式:二进制更新和从源代码构建。下面将详细介绍这两种升级方式的具体内容。

1. 二进制更新

FreeBSD通过 freebsd-update(8) 支持二进制更新,类似于Windows、Firefox等商业软件提供的二进制更新服务。可以使用它跨主要版本、次要版本和补丁级别进行升级,但不能跟踪 -stable 或 -current 版本,只能用于正式版本。

1.1 数据保护

升级可能会破坏数据,因此在进行任何升级之前,请务必备份系统。可以将数据复制到磁带、文件等。

1.2 /etc/freebsd-update.conf配置文件

该文件中的一些常用配置选项如下:
| 配置选项 | 说明 |
| ---- | ---- |
| KeyPrint 800... | 列出更新服务的加密签名,正常使用无需更改 |
| ServerName update.freebsd.org | 告诉 freebsd-update(8) 从哪里获取更新,通常无需修改 |
| Components src world kernel | 默认提供 /usr/src 源代码、用户空间(world)和 GENERIC 内核的最新补丁,可根据需求调整 |
|

FreeBSD如何进行系统升级 原因是当前在使用的版本是12.4,官方已经停止维护了,而且找了几个国内的镜像站也不维护了,导致pkg工具都无法安装,干脆直接进行系统升级。 阅读详情

相关推荐

68、FreeBSD 监狱(Jails)配置与管理全攻略

本文全面介绍了FreeBSD监狱(Jails)的配置与管理方法,涵盖IP地址设置、开机启动、用户空间安装、jail.conf配置、变量使用、启动停止流程、依赖关系管理及实际应用示例。通过详细的步骤和命令说明,帮助系统管理员实现应用程序的安全隔离与高效资源利用,适用于从初学者到高级用户的各类场景。

sql99的博客 82

基于斜坡补偿的Buck电路峰值电流+电压电流双闭环控制【附说明文档】(Simulink仿真实现)优快云首页发布文章优快云同步助手LLC谐振变换器开环+闭环软启动仿真设计(Simulink

内容概要:本文围绕三电平VIENNA整流器的双闭环控制与中点电位平衡问题展开仿真研究,提出了一种基于上下电容电压差值补偿的中点电位平衡策略。该策略在传统电压电流双闭环PI控制的基础上,引入电容电压差值作为反馈信号,通过SVPWM调制中冗余小矢量的时间分配实现中点电荷的定向调节,从而在不改变主控制结构的前提下有效抑制中点电位偏差。仿真结果表明,该方法不仅确保直流母线电压稳定跟踪800V给定值,还能显著提升上下电容电压的均衡度,同时保持输入电流低谐波水平,验证了控制策略的可行性和有效性。; 适合人群:电力电子、电气自动化及相关专业的研究生、科研人员及工程技术人员,具备一定的MATLAB/Simulink仿真基础和电力电子拓扑知识背景者更佳。; 使用场景及目标:①掌握三电平VIENNA整流器的工作原理与中点电位波动的成因;②理解电压电流双闭环PI控制的设计要点与参数整定原则;③学习基于差值补偿的中点电位平衡控制策略及其与SVPWM的协同机制;④应用于充电桩、航空电源、通信电源等中大功率单向整流场合的控制系统设计与优化。; 阅读建议:建议结合文中提供的仿真模型与参数设置进行动手实践,重点关注中点电位平衡投入前后电容电压波形的变化,对比分析不同工况下的系统动态响应,深入理解控制策略的作用机理。同时可进一步探索在电网不平衡、轻载等复杂工况下的控制性能,以拓展应用场景。

基于 AUTOSAR 的域控产品软件开发进阶探索

本文深入探讨了AUTOSAR架构在汽车域控产品开发中的进阶应用。首先从系统设计角度分析了AUTOSAR分层架构原理及其在域控产品中的优化部署策略;其次详细介绍了Davinci和EBTresos等主流工具链的特点与协同使用方法;然后重点阐述了ASPICE流程与功能安全/信息安全标准的实施要点;最后分享了多核车载芯片(如NXP S32G)的适配经验与优化实践。通过架构设计、工具运用、标准遵循和芯片适配四个维度的专业解析,为域控产品的AUTOSAR开发提供了系统性指导。

SiArch的博客 1201

Clion编译stm32cube初始化工程时non constant or forward reference address expression for section .ARM.extab报错

相信应该有同学在看了稚晖君关于clion开发stm32的文章之后也想在自己PC上实现“优雅の嵌入式开发”遇到和我类似的问题。他的文章是22年写的,我个人猜测应当是版本更新导致的不适配。意思就是说 READONLY 只能在gcc11以后的版本中使用,gcc10及以前的版本将无法正确识别,也就有如下错误。或者就可以将gcc升级至最新的版本。记得在clion工具链中修改c,cpp编译器的位置。可以将文本括号中的 READONLY 全部删除。当时由于没有注意到这行注释导致在这里卡了好久。

2301_77256849的博客 2514

玩转Zabbix智能告警:降噪、排班、认领、升级、IM协同

集成Zabbix告警到FlashDuty,获得告警降噪、智能排班、IM协同等能力

n9ecommunity的博客 1050

西门子S7-1200和IFM IO-Link主站连接与设定

硬件配置:S7-1200 1214DC/DC/DC,IFM AL1102支持Profinet,IFM支持IO-Link的流量传感器SBG233,流量开关SI5010,接近开关IF6123。第三步:打开IFM moneo configure可查看到流量传感器SBG233 PLC映射所有输出共占用4个byte,也可在IFM官网下载传感器对应IODD文件。第五步:组态编程编译下载。最近新做了一个项目,用到了IO-Link设备,今天来分享一下S7-1200和IFM IO-Link主站模块AL1102的连接过程。

GreatShen168的博客 6495

【Kingbase人大金仓】授权文件更换

本文介绍了金仓数据库授权文件更换的步骤:1.通过ksql或客户端工具查询数据库版本;2.在官网下载对应版本的license.bat文件;3.替换前先备份原授权文件(使用tar命令压缩),再用新文件覆盖原文件。注意事项包括:版本号需严格对应,授权文件通常位于安装目录下,可使用find命令查找具体位置。操作需谨慎,建议先备份原文件以便恢复。

qq_34463511的博客 3474

Arduino四足开源机器猫-Opencat(导航贴)

本内容由我和小伙伴共同编写,未经授权,谢绝转载! 1.项目介绍 2.组装调试教程 (一)Opencat-F (1)资料地址(包含程序代码&&3D打印图纸): 链接:https://pan.baidu.com/s/1AcVA5jSiOSzRKqEQAomrTA 提取码:szfx (2) (二)Opencat-B (1)组装调试 (2)组装调试注意事项 (3)添加新技能 3.编程 ...

qqliuzhitong的博客 4173

别再手动配IP了!用NI-USRP Configuration Utility快速搞定USRP 2954与LabVIEW连接

本文详细介绍了如何使用NI-USRP Configuration Utility快速配置USRP 2954与LabVIEW的连接,解决传统手动IP配置的繁琐问题。通过图形化工具自动完成设备发现、IP设置和连接验证,大幅提升软件无线电实验效率,特别适合信号收发应用场景。

weixin_27102543的博客 292

STM32G474多通道ADC电压采集:软件触发与单次转换实战

本文详细介绍了STM32G474多通道ADC电压采集的实战方法,重点讲解了软件触发与单次转换的实现技巧。通过硬件设计、HAL库配置、多通道轮询采集及数据处理等环节的详细解析,帮助开发者高效完成精确电压采集任务。文章还提供了常见问题调试技巧和性能优化建议,适用于需要高精度电压监测的嵌入式应用场景。

weixin_28720767的博客 466

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

假人有限元模型

假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

上一篇: 21、有源滤波器二阶节的设计与性能分析
下一篇: 22、有源滤波器的设计与分析
sql99
博客等级 码龄19年 168粉丝 1905原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值