STM32F767 光环境传感器AP3216C

原创
已于 2022-12-01 22:25:49 修改 · 397 阅读
4 ·
CC 4.0 BY-SA版权
文章标签：
#stm32 #单片机 #arm
于 2022-05-25 22:06:41 首次发布
/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

#include "delay.h"
#include "bsp_printf.h"
#include "bsp_key.h"
#include "string.h"
#include "usmart.h"
#include "usart.h"
#include "bsp_lcd.h"
//#include "bsp_pcf8574.h"
#include "bsp_ap3216c.h"

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

I2C_HandleTypeDef hi2c2;

LTDC_HandleTypeDef hltdc;

SDRAM_HandleTypeDef hsdram1;

/* USER CODE BEGIN PV */

uint16_t FBuffer[LCD_WIDTH*LCD_HEIGHT] __attribute__((at(0xC0000000))); 
uint32_t POINT_COLOR;		//画笔颜色
uint32_t BACK_COLOR;  	//背景色 

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_FMC_Init(void);
static void MX_LTDC_Init(void);
static void MX_I2C2_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

static void Sdram_SendCommand(uint32_t CommandMode, uint32_t CommandTarget, uint32_t AutoRefreshNumber, uint32_t ModeRegisterDefinition)
{
   
   
	FMC_SDRAM_CommandTypeDef Command;
	
	Command.AutoRefreshNumber = AutoRefreshNumber;
	Command.CommandMode = CommandMode;
	Command.CommandTarget = CommandTarget;
	Command.ModeRegisterDefinition = ModeRegisterDefinition;
	
	HAL_SDRAM_SendCommand(&hsdram1, &Command, 0);
}

static void Sdram_Init_Sequence(void)
{
   
   
	uint32_t ModeRegisterDefinition;
//	uint16_t Mode_WB;
//	uint16_t Mode_Op;
//	uint16_t Mode_CasLatency;
//	uint16_t Mode_Bt;
//	uint16_t Mode_BurstLength;
	
	Sdram_SendCommand(FMC_SDRAM_CMD_CLK_ENABLE, FMC_SDRAM_CMD_TARGET_BANK1, 0, 0);
	
	delay_us(200);
	
	Sdram_SendCommand(FMC_SDRAM_CMD_PALL, FMC_SDRAM_CMD_TARGET_BANK1, 0, 0);
	
	Sdram_SendCommand(FMC_SDRAM_CMD_AUTOREFRESH_MODE, FMC_SDRAM_CMD_TARGET_BANK1, 1, 0);
	
	//SDRAM????2?êy
	#define SDRAM_MODEREG_BURST_LENGTH_1             ((uint16_t)0x0000)
	#define SDRAM_MODEREG_BURST_LENGTH_2             ((uint16_t)0x0001)
	#define SDRAM_MODEREG_BURST_LENGTH_4             ((uint16_t)0x0002)
	#define SDRAM_MODEREG_BURST_LENGTH_8             ((uint16_t)0x0004)
	#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL      ((uint16_t)0x0000)
	#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED     ((uint16_t)0x0008)
	#define SDRAM_MODEREG_CAS_LATENCY_2              ((uint16_t)0x0020)
	#define SDRAM_MODEREG_CAS_LATENCY_3              ((uint16_t)0x0030)
	#define SDRAM_MODEREG_OPERATING_MODE_STANDARD    ((uint16_t)0x0000)
	#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
	#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE     ((uint16_t)0x0200)

	ModeRegisterDefinition=(uint32_t)SDRAM_MODEREG_BURST_LENGTH_1          |	
              SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL   |	
              SDRAM_MODEREG_CAS_LATENCY_3           |	
              SDRAM_MODEREG_OPERATING_MODE_STANDARD |   
              SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;     

	Sdram_SendCommand(FMC_SDRAM_CMD_LOAD_MODE