stm32实现流水灯

一、STM32F103C8实现流水灯

打开keil，创建新项目

选择芯片

创建C文件

C代码

//--------------APB2???????------------------------
#define RCC_AP2ENR	*((unsigned volatile int*)0x40021018)
	//----------------GPIOA????? ------------------------
#define GPIOA_CRL	*((unsigned volatile int*)0x40010800)
#define	GPIOA_ORD	*((unsigned volatile int*)0x4001080C)
//----------------GPIOB????? ------------------------
#define GPIOB_CRH	*((unsigned volatile int*)0x40010C04)
#define	GPIOB_ORD	*((unsigned volatile int*)0x40010C0C)
//----------------GPIOC????? ------------------------
#define GPIOC_CRH	*((unsigned volatile int*)0x40011004)
#define	GPIOC_ORD	*((unsigned volatile int*)0x4001100C)
//-------------------???????-----------------------
void  Delay_wxc( volatile  unsigned  int  t)
{
     unsigned  int  i;
     while(t--)
         for (i=0;i<800;i++);
}
//------------------------???--------------------------
int main()
{
	int j=100;
	RCC_AP2ENR|=1<<2;			//APB2-GPIOA??????
	RCC_AP2ENR|=1<<3;			//APB2-GPIOB??????	
	RCC_AP2ENR|=1<<4;			//APB2-GPIOC??????
	//????????? RCC_APB2ENR|=1<<3|1<<4;
	GPIOA_CRL&=0x0FFFFFFF;		//??? ??	
	GPIOA_CRL|=0x20000000;		//PA7????
	GPIOA_ORD|=1<<7;			//???????
	
	GPIOB_CRH&=0xFFFFFF0F;		//??? ??	
	GPIOB_CRH|=0x00000020;		//PB9????
	GPIOB_ORD|=1<<9;			//???????
	
	GPIOC_CRH&=0x0FFFFFFF;		//??? ??
	GPIOC_CRH|=0x30000000;   	//PC15????
	GPIOC_ORD|=0x1<<15;			//???????	
	while(j)
	{	
		GPIOA_ORD=0x0<<7;		//PB0???	
		Delay_wxc(1000000);
		GPIOA_ORD=0x1<<7;		//PB0???
		Delay_wxc(1000000);
		
		GPIOB_ORD=0x0<<9;		//PB9???	
		Delay_wxc(1000000);
		GPIOB_ORD=0x1<<9;		//PB9???
		Delay_wxc(1000000);
		
		GPIOC_ORD=0x0<<15;		//PC15???	
		Delay_wxc(1000000);
		GPIOC_ORD=0x1<<15;		//PC15???
		Delay_wxc(1000000);
	}
}

添加驱动文件，并选择

生成hex文件，准备烧录


构筑完成后在项目文件的Objects文件中会生成hex文件

连接线路

用mcuisp进行烧录

实验效果

总结

通过本次练习，我初步了解了stm32核心板的工作原理，并能初步使用核心板。