华为路由器配置RIP协议

最新推荐文章于 2025-11-26 15:29:35 发布

原创

最新推荐文章于 2025-11-26 15:29:35 发布 · 4.9k 阅读

54 ·

CC 4.0 BY-SA版权

文章标签：

#华为网络 #华为路由器 #RIP

本文介绍了华为路由器的基本配置步骤，并详细讲解了如何在华为路由器上配置RIP协议。此外，还提供了Cisco模拟器下配置RIP的参考资料链接。

1、路由器基本配置

R1：
<Huawei>system-view 
[Huawei]sysname R1
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip address 10.10.10.1 255.255.255.0
[R1-GigabitEthernet0/0/0]interface g0/0/1
[R1-GigabitEthernet0/0/1]ip address 11.11.11.1 255.255.255.0
 
R2:
<Huawei>system-view 
[Huawei]sysname R2
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip address 10.10.10.2 255.255.255.0
[R2-GigabitEthernet0/0/0]interface g0/0/1
[R2-GigabitEthernet0/0/1]ip address 12.12.12.254 255.255.255.0
 
R3:
<Huawei>system-view 
[Huawei]sysname R3
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]ip address 11.11.11.2 255.255.255.0
[R3-GigabitEthernet0/0/0]interface g0/0/1
[R3-GigabitEthernet0/0/1]ip address 13.13.13.254 255.255.255.0
[R3-GigabitEthernet0/0/1]interface loopback 0
[R3-LoopBack0]ip address 172.16.10.1 255.255.255.0
[R3