hydra 官方使用文档

Hydra参数详解:那些官方文档没告诉你的实用技巧与避坑指南 本文深入解析Hydra密码审计工具的核心参数与实战技巧,超越官方文档,提供线程控制、字典策略、服务模块特化及流程优化的实用指南。重点探讨如何平衡性能与隐蔽性,规避常见陷阱,并通过高级策略提升渗透测试效率与成功率。 阅读详情
INTRODUCTION
------------
Number one of the biggest security holes are passwords, as every password
security study shows.
This tool is a proof of concept code, to give researchers and security
consultants the possiblity to show how easy it would be to gain unauthorized
access from remote to a system.

THIS TOOL IS FOR LEGAL PURPOSES ONLY!

There are already several login hacker tools available, however none does
either support more than one protocol to attack or support parallized
connects.

It was tested to compile cleanly on Linux, Windows/Cygwin, Solaris,
FreeBSD/OpenBSD, QNX (Blackberry 10) and OSX.

Currently this tool supports the following protocols:
 Asterisk, AFP, Cisco AAA, Cisco auth, Cisco enable, CVS, Firebird, FTP,
 HTTP-FORM-GET, HTTP-FORM-POST, HTTP-GET, HTTP-HEAD, HTTP-PROXY, HTTPS-FORM-GET,
 HTTPS-FORM-POST, HTTPS-GET, HTTPS-HEAD, HTTP-Proxy, ICQ, IMAP, IRC, LDAP,
 MS-SQL, MYSQL, NCP, NNTP, Oracle Listener, Oracle SID, Oracle, PC-Anywhere,
 PCNFS, POP3, POSTGRES, RDP, Rexec, Rlogin, Rsh, SAP/R3, SIP, SMB, SMTP,
 SMTP Enum, SNMP v1+v2+v3, SOCKS5, SSH (v1 and v2), SSHKEY, Subversion,
 Teamspeak (TS2), Telnet, VMware-Auth, VNC and XMPP.

However the module engine for new services is very easy so it won't take a
long time until even more services are supported.
Your help in writing, enhancing or fixing modules is highly appreciated!! :-)



WHERE TO GET
------------
You can always find the newest release/production version of hydra at its
project page at https://www.thc.org/thc-hydra
If you are interested in the current development state, the public development
repository is at Github:
  svn co https://github.com/vanhauser-thc/thc-hydra
 or
  git clone https://github.com/vanhauser-thc/thc-hydra.git
Use the development version at your own risk. It contains new features and
new bugs. Things might not work!



HOW TO COMPILE
--------------
To configure, compile and install hydra, just type:

./configure
make
make install

If you want the ssh module, you have to setup libssh (not libssh2!) on your
system,  get it from http://www.libssh.org, for ssh v1 support you also need
to add "-DWITH_SSH1=On" option in the cmake command line.

If you use Ubuntu/Debian, this will install supplementary libraries needed
for a few optional modules:
 apt-get install libssl-dev libssh-dev libidn11-dev libpcre3-dev \
                 libgtk2.0-dev libmysqlclient-dev libpq-dev libsvn-dev \
                 firebird2.1-dev libncp-dev
This enables all optional modules and features with the exception of Oracle,
SAP R/3 and the apple filing protocol - which you will need to download and
install from the vendor's web sites.

For all other Linux derivates and BSD based systems, use the system
software installer and look for similar named libraries like in the
comand above. In all other cases you have to download all source libraries
and compile them manually.



SUPPORTED PLATFORMS
-------------------
All UNIX platforms (linux, *bsd, solaris, etc.)
Mac OS/X
Windows with Cygwin (both IPv4 and IPv6)
Mobile systems based on Linux, Mac OS/X or QNX (e.g. Android, iPhone, Blackberry 10, Zaurus, iPaq)



HOW TO USE
----------
If you just enter "hydra", you will see a short summary of the important
options available.
Type "./hydra -h" to see all available command line options.

Note that NO login/password file is included. Generate them yourself.
A default password list is hoever present, use "dpl4hydra.sh" to generate
a list.

For Linux users, a GTK gui is available, try "./xhydra"

For the command line usage, the syntax is as follows:
 For attacking one target or a network, you can use the new "://" style:
  hydra [some command line options] PROTOCOL://TARGET:PORT/OPTIONS
 The old mode can be used for these too, and additionally if you want to
 specify your targets from a text file, you *must* use this one:
  hydra [some command line options] [-s port] TARGET PROTOCOL OPTIONS

Via the command line options you specify which logins to try, which passwords,
if SSL should be used, how many parallel tasks to use for attacking, etc.

PROTOCOL is the protocol you want to use for attacking, e.g. ftp, smtp,
http-get or many others are available
TARGET is the target you want to attack
OPTIONS are optional values which are special per PROTOCOL module

FIRST - select your target
 you have three options on how to specify the target you want to attack:
 1. a single target on the command line: just put the IP or DNS address in
 2. a network range on the command line: CIDR specification like "192.168.0.0/24"
 3. a list of hosts in a text file: one line per entry (see below)

SECOND - select your protocol
 Try to avoid telnet, as it is unreliable to detect a correct or false login attempt.
 Use a port scanner to see which protocols are enabled on the target.

THIRD - check if the module has optional parameters
 hydra -U PROTOCOL
 e.g. hydra -U smtp

FOURTH - the destination port
 this is optional! if no port is supplied the default common port for the
 PROTOCOL is used.
 If you specify SSL to use ("-S" option), the SSL common port is used by default.


If you use "://" notation, you must use "[" "]" brackets if you want to supply
IPv6 addresses or CIDR ("192.168.0.0/24") notations to attack:
  hydra [some command line options] ftp://[192.168.0.0/24]/
  hydra [some command line options] -6 smtp://[2001:db8::1]/NTLM

Note that everything hydra does is IPv4 only!
If you want to attack IPv6 addresses, you must add the "-6" command line option.
All attacks are then IPv6 only!

If you want to supply your targets via a text file, you can not use the ://
notation but use the old style and just supply the protocol (and module options):
  hydra [some command line options] -M targets.txt ftp
You can supply also port for each target entry by adding ":<port>" after a
target entry in the file, e.g.:
  foo.bar.com
  target.com:21
  unusual.port.com:2121
  default.used.here.com
  127.0.0.1
  127.0.0.1:2121



LOGINS AND PASSWORDS
--------------------
You have many options on how to attack with logins and passwords
With -l for login and -p for password you tell hydra that this is the only
login and/or password to try.
With -L for logins and -P for passwords you supply text files with entries.
e.g.:
  hydra -l admin -p password ftp://localhost/
  hydra -L default_logins.txt -p test ftp://localhost/
  hydra -l admin -P common_passwords.txt ftp://localhost/
  hydra -L logins.txt -P passwords.txt ftp://localhost/
Additionally, you can try passwords based on the login via the "-e" option.
The "-e" option has three parameters:
  s - try the login as password
  n - try an empty password
  r - reverse the login and try it as password
If you want to, e.g. try "try login as password and "empty password", you
specify "-e sn" on the command line.


But there are two more modes for trying passwords than -p/-P:
You can use text file which where a login and password pair is seperated by a colon,
e.g.:
  admin:password
  test:test
  foo:bar
This is a common default account style listing, that is also generated by the
dpl4hydra.sh default account file generator supplied with hydra.
You use such a text file with the -C option - note that in this mode you
can not use -l/-L/-p/-P options (-e nsr however you can).
Example:
  hydra -C default_accounts.txt ftp://localhost/

And finally, there is a bruteforce mode with the -x option (which you can not
use with -p/-P/-C):
  -x minimum_length:maximum_length:charset
the charset definition is 'a' for lowercase letters, 'A' for uppercase letters,
'1' for numbers and for anything else you supply it is their real representation.
Examples:
  -x 1:3:a generate passwords from length 1 to 3 with all lowercase letters
  -x 2:5:/ generate passwords from length 2 to 5 containing only slashes
  -x 5:8:A1 generate passwords from length 5 to 8 with uppercase and numbers
Example:
  hydra -l ftp -x 3:3:a ftp://localhost/



SPECIAL OPTIONS FOR MODULES
---------------------------
Via the third command line parameter (TARGET SERVICE OPTIONAL) or the -m
commandline option, you can pass one option to a module.
Many modules use this, a few require it!

To see the special option of a module, type:
  hydra -U <module>
e.g.
  ./hydra -U http-post-form

The special options can be passed via the -m parameter, as 3rd command line
option or in the service://target/option format.

Examples (they are all equal):
  ./hydra -l test -p test -m PLAIN 127.0.0.1 imap
  ./hydra -l test -p test 127.0.0.1 imap PLAIN
  ./hydra -l test -p test imap://127.0.0.1/PLAIN



RESTORING AN ABORTED/CRASHED SESSION
------------------------------------
When hydra is aborted with Control-C, killed or crashs, it leavs a
"hydra.restore" file behind which contains all necessary information to
restore the session. This session file is written every 5 minutes.
NOTE: the hydra.restore file can NOT be copied to a different platform (e.g.
from little indian to big indian, or from solaris to aix)



HOW TO SCAN/CRACK OVER A PROXY
------------------------------
The environment variable HYDRA_PROXY_HTTP defines the web proxy (this works
just for the http/www service!).
The following syntax is valid:
  HYDRA_PROXY_HTTP="http://123.45.67.89:8080/"
For all other services, use the HYDRA_PROXY variable to scan/crack
via by default a web proxy's CONNECT call. It uses the same syntax. eg:
  HYDRA_PROXY=[http|socks4|socks5]://proxy_addr:proxy_port
for example:
  HYDRA_PROXY=http://proxy.anonymizer.com:8000

If you require authentication for the proxy, use the HYDRA_PROXY_AUTH
environment variable:
  HYDRA_PROXY_AUTH="the_login:the_password"



ADDITIONAL HINTS
----------------
* sort your password files by likelihood and use the -u option to find
  passwords much faster!
* uniq your dictionary files! this can save you a lot of time :-)
    cat words.txt | sort | uniq > dictionary.txt
* if you know that the target is using a password policy (allowing users
  only to choose password with a minimum length of 6, containing a least one
  letter and one number, etc. use the tool pw-inspector which comes along
  with the hydra package to reduce the password list:
    cat dictionary.txt | pw-inspector -m 6 -c 2 -n > passlist.txt



SPEED
-----
through the parallizing feature, this password cracker tool can be very
fast, however it depends on the protocol. The fastest are generally POP3
and FTP.
Experiment with the task option (-t) to speed things up! The higher - the
faster ;-) (but too high - and it disables the service)



STATISTICS
----------
Run against a SuSE Linux 7.2 on localhost with a "-C FILE" containing
295 entries (294 tries invalid logins, 1 valid). Every test was run three
times (only for "1 task" just once), and the average noted down.

            P A R A L L E L    T A S K S
SERVICE    1    4    8    16    32    50    64    100    128
------- --------------------------------------------------------------------
telnet    23:20    5:58    2:58    1:34    1:05    0:33    0:45*    0:25*    0:55*
ftp        45:54    11:51    5:54    3:06    1:25    0:58    0:46    0:29    0:32
pop3    92:10    27:16    13:56    6:42    2:55    1:57    1:24    1:14    0:50
imap    31:05    7:41    3:51    1:58    1:01    0:39    0:32    0:25    0:21

(*)
Note: telnet timings can be VERY different for 64 to 128 tasks! e.g. with
128 tasks, running four times resulted in timings between 28 and 97 seconds!
The reason for this is unknown...

guesses per task (rounded up):
    295    74    38    19    10    6    5    3    3

guesses possible per connect (depends on the server software and config):
    telnet    4
    ftp        6
    pop3    1
    imap    3



BUGS & FEATURES
---------------
Hydra:
Email me or David if you find bugs or if you have written a new module.
vh@thc.org (and put "antispam" in the subject line)
David (dot) Maciejak @ gmail (dot) com


You should use PGP to encrypt emails to vh@thc.org :

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v3.3.3 (vh@thc.org)
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=ytEf
-----END PGP PUBLIC KEY BLOCK-----

Python配置与测试利器:Hydra + pytest的完美结合 简介:Hydra 和 pytest 可以一起使用,基于 Hydra + Pytest 的应用可以轻松地管理复杂配置,并编写参数化的单元测试,使得Python开发和测试将变得更为高效。安装: 案例源码:my_app.py 测试用例:test_hy.py 同级目录下:新建conf目录,新建文件 config.yaml 运行结果: 注意事项:Hydra 在 pytest 环境中的行为可能与在常规 Python 环境中的行为略有不同,因为 pytest 可能会干扰 Hydra 的工作方式 阅读详情

相关推荐

黑客之路-使用hydra进行简单的密码爆破

需要用到的工具:hydra爆破工具、字典 指定用户名 hydra -l root -P pass.txt mysql://172.17.0.2 使用字典用户名 hydra -l root -P pass.txt mysql://172.17.0.2

坐公交也用券 3881

Hydra攻击HTTP基本身份验证

与其他身份验证方法(例如基于表单的身份验证方法)不同,基本身份验证在发送到服务器的内容、如何发送以及期望从服务器得到的响应方面是标准的。这允许攻击者和渗透测试人员节省宝贵的分析时间,这些工作涉及的参数包含用户名和密码、如何处理,发送这些参数以及如何区分成功响应和不成功响应。:THC Hydra(简称Hydra)是一个可以进行在线登录验证的工具,kali下是默认安装的,几乎支持所有协议的在线破解;这意味着Hydra将首先使用单个密码尝试所有的用户名,然后继续使用下一个密码。这将有助于防止账户锁定。

m0_73630977的博客 747

thc-hydra-windows:适用于Windows的出色THC-HYDRA工具

THC-HYDRA-窗户 描述 为Windows编译的THC-HYDRA工具 特征 最新的9.1版本(2020-07-29) 仅从9.1版开始针对x64进行编译,针对x86进行了编译,因此它们应可在x86和x64平台上运行 与SSH,MySQL,PostgreSQL和RDP可选模块一起编译 嵌入式Cygwin DLL 用法 下载 解压缩并运行hydra.exe 利润 先决条件 较旧的版本 浏览以找到一些旧版本 免责声明和许可 就像在提到的一样。 我没有THC品牌或hydra的任何商品,也不隶属于该公司或从事该项目。 最后但并非最不重要的一点是,防病毒软件可能会将某些二进制文件报告为hacktools甚至是恶意软件:这是一个已知且常见的问题。 如果您不信任此编译,请不要下载它。 学分 黑客选择“ THC”

kali linux篇之协议爆破工具hydra

简介: hydra是著名黑客组织thc的一款开源的暴力密码破解工具,可以在线破解多种密码。官 网:http://www.thc.org/thc-hydra。 这边以自己内部环境的另一台Linux为例子,过程都在安全环境下进行。 输入xhydra,可以直接打开图形化界面 通过nmap扫描可以得知目标的IP为192.168.172.131,开放的端口为22 补充一下:协议选择ssh远程登陆,22号端口对应ssh 然后到passwords界面,我们这边是要对root用户进行密码枚.

白帽小学二年级的博客 9724

Holtek BS45F3833芯片深度剖析:如何用高集成MCU重塑超声波雾化市场格局?

本文深度剖析Holtek BS45F3833芯片如何通过高集成MCU技术重塑超声波雾化市场。该芯片集成了PWM直驱、电容检水、触摸控制等核心功能,显著提升雾化精度和效率,同时降低BOM成本和开发难度。文章通过实测数据和实战案例,展示了其在香薰机、车载设备及工业加湿器等场景的创新应用,为开发者提供了一站式解决方案。

weixin_29192211的博客 416

Gerrit 使用操作手册

Gerrit是一种免费、开源的代码审查工具,使用网页交互页面。这个软件的名称来自于荷兰设计师师赫里特·里特费尔德(GerritRietveld),作者为Google公司的ShawnPearce。它使用Git作为底层版本控制系统,相比于其他的代码管理工具,Gerrit明显的特色是代码审核。利用网页浏览器,同一个团队的软件程序员,可以相互审核(Review)彼此修改后的程序代码,然后决定是继续提交还是取消提交。...

九离的博客 1万+

Linux SSH密码暴力破解技术及攻击实战

对于 Linux 操作系统来说,一般通过 VNC、Teamviewer 和 SSH 等工具来进行远程管理,SSH 是 Secure Shell 的缩写,由 IETF 的网络小组(Network Working Group)所制定;SSH 为建立在应用层基础上的安全协议。 SSH 是目前较可靠,专为远程登录会话和其他网络服务提供安全性的协议。利用 SS...

weixin_34056162的博客 3543

Windows安装ros2(Jazzy版本+win10/win11)-1.配置windows终端

更高版本的terminal可能设置里更加丰富, 有默认以管理员身份启动的选项等,可自行配置。打开微软应用商店, 在其中搜索并下载 Terminal 即可(注意别挂梯子)下载并安装, 安装的位置自行替换,建议别放到系统盘中。点击任务栏中的搜索, 输入store。

weixin_48398592的博客 1454

黑客常用的暴力破解工具hydra

黑客常用的暴力破解工具hydra

2302_76672693的博客 2985

【目标跟踪】ECO算法论文阅读:ECO: Efficient Convolution Operators for Tracking

这里所指的训练集是指保存了每一帧的跟踪结果的训练集,也就是说,每一次进行model update的时候,要用在这一帧之前所有跟踪到的样本。那么随着视频越来越长,这个训练集就会越来越大。因为当目标被遮挡或者丢失的时候,比较新的这些样本本身就是错的,那么模型很容易有model drift,就是被背景或者错误的目标污染,导致跟踪结果出错。如下图所示,Baseline是传统的训练集,每更新一帧就加一个进来,那么连续的数帧后训练集里面的样本都是高度相似的,即容易遗忘前面的样本,且容易对最近的若干帧样本过拟合。

qq_43799400的博客 2619

ABAP FB05 清账实战:POSTING_INTERFACE_CLEARING 核心参数与业务场景解析

本文深入解析ABAP FB05清账操作中的核心函数POSTING_INTERFACE_CLEARING,详细讲解其关键参数与业务场景应用。通过实战案例展示收款清账(EINGZAHL)流程,提供常见错误排查方法,并分享批量清账优化与财务凭证集成的高级技巧,帮助开发者高效处理SAP财务模块清账需求。

weixin_33423874的博客 481

渗透工具-hydra

下载地址:https://github.com/maaaaz/thc-hydra-windows。1. 著名的黑客组织thc的一款开源的,针对系统登录暴力破解密码的工具。Kali Linux默认是预装的,开机即可使用。- 解压安装,然后使用cmd命令切换到安装目录,- 输入hydra.exe回车,出现以下提示。#### Hydra支持的协议。#### windows 安装。#### centos 安装。#### 安装Hydra。

weixin_53188914的博客 842

MAVLink协议详解

MAVLink是为微型飞行器MAV(Micro Air Vehicle)设计的(LGPL)开源的通讯协议。是无人飞行器和地面站(Ground Control Station ,GCS)之间,以及无人飞行器之间通讯常用的协议。APM、PIXHAWK飞控,Mission Planner、QGroundControl地面站均使用了MAVLink协议进行通讯。 MAVLink源码下载地址(现已更新至v2.0):https://github.com/mavlink/qgroundcontrol   用户手册:ht

程序猿老樊的博客 7710

【亲测免费】 THC-Hydra Windows 版本下载

THC-Hydra Windows 版本下载 【下载地址】THC-HydraWindows版本下载 本资源仓库提供THC-Hydra工具的Windows版本下载,THC-Hydra是一款广受认可的网络登录安全测试工具,支持多种服务和协议的在线密码强度验证,是安全测试和验证的得力助手。下载后解压文件即可使用,建议结合官方文...

gitblog_06753的博客 1024

【ROS机器人系统】实验4 ROS简单应用:激光SLAM与导航

ROS简单应用:激光SLAM与导航 (1)了解机器人和SLAM之间关系 (2)了解激光SLAM (3)了解gmapping和导航

南京大学软件工程硕士在读 2149

S7-200 SMART PLC 数字量阀门控制功能块(FB)汇总

S7-200 SMART PLC功能块的各种写法可以查看专栏的其它文章,链接地址如下:S7-200 SMART PLC 子程序功能块(阀门控制)_RXXW_Dor的博客-优快云博客_plc控制阀门开关程序由于S7-200 SMARTPLC的子程序种种功能、容量限制,有时想实现多次调用的子程序可能并不是太容易,这篇博客还是给出一些推荐写法,供大家参看。

RXXW_Dor的博客 4003

python hydra库

pip install hydra-core

cash_cp的博客 1615

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

Kali linux中使用工具Hydra攻击HTTP基本身份验证

THC Hydra(简称Hydra)是一个可以进行在线登录验证的工具;这意味着它可以通过暴力的方式来尝试登录密码。在Hydra支持的众多服务中,我们可以找到HTTP基本身份验证。

KKKmeng的博客 1301

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

hydra爆破

简单介绍一下本款软件:hydra也称九头蛇,是一个支持众多协议的爆破工具,且Windows/Linux环境下都支持(个人认为在linux环境下更好用),且本软件已经集成到kali系统中,所以一下所有示例都在kali系统下完成。 hydra官网:http://www.thc.org/ hydra使用在线破解的方式进行账号密码认证,通常有一下几种情况:1.用户名未知,密码未知。2.用户名已知,密码...

奇怪的569的博客 4782

efm32 入门.pdf

本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。

Burpsuite 指纹特征绕过

需要高版本 17 + 的 burp 运行插件,可 bypass 网站流量设备的检测,正常抓包。未使用插件前,burp 指纹特征被识别,抓包被拦截。

Javachichi的博客 6651

THC-Hydra:网络登录测试工具深度解析

THC-Hydra:网络登录测试工具深度解析 【免费下载链接】thc-hydra hydra 项目地址: https://gitcode.com/gh_mirrors/th/thc-hydra ...

gitblog_00698的博客 585

hydra --- 九头蛇。。万岁。。。

最大的安全漏洞之一就是是密码,因为这个是每个密码安全研究表明的。这个工具是一个概念验证代码,给研究人员和安全顾问有可能展示未经授权的行为是多么容易从远程访问系统。已经有几种登录黑客工具可用,但是没有一个要么支持多个协议进行攻击,要么支持并行化连接。它经过测试可以在Linux、Windows/Cygwin、Solaris、FreeBSD/OpenBSD、QNX(Blackberry 10)和 MacOS。

一枚小白的分享,不喜勿喷~ 1868

Hydra(九头蛇)工具使用,0基础入门到精通,收藏这一篇就够了

hydra(九头蛇)是著名黑客组织thc的一款开源的暴力破解密码工具,功能非常强大,kali下是默认安装的,几乎支持所有协议的在线破解。密码能否破解,在于字典是否强大。

logic1001的博客 2271

使用hydra进行HTTP认证破解

虽然使用密码破解工具可以成功破解HTTP基本认证,但是在实际应用中,请勿使用HTTP基本认证进行身份验证,而应该使用更安全的身份验证机制,例如HTTPS和OAuth。在本文中,我们介绍了使用Hydra进行HTTP表单认证破解。在上面的命令中,我们使用用户名admin,密码字典文件为rockyou.txt,目标URL为http://localhost/login.php,表单数据文件为login-form.txt,POST参数为username和password,以及错误消息为“Login failed”。

Kali与编程 2937

Hydra 项目使用文档

Hydra 项目使用文档 1. 项目的目录结构及介绍 Hydra 项目的目录结构如下: hydra/ ├── docs/ ├── examples/ ├── hydra/ │ ├── __init__.py │ ├── core/ │ ├── utils/ │ └── ... ├── tests/ ├── .gitignore ├── LICENSE ├── README.md ├...

gitblog_01069的博客 451

介绍6款密码暴力破解工具

Hydra(九头蛇)是THC组织开发的,是一款非常流行的密码破解工具,可以对多种服务的账号和密码进行爆破,包括 Web 登录、数据库、 SSH、 FTP 等服务,支持 Linux、Windows、 Mac 平台安装,其中 Kali Linux中自带 Hydra。内容概要:包括 内网、操作系统、协议、渗透测试、安服、漏洞、注入、XSS、CSRF、SSRF、文件上传、文件下载、文件包含、XXE、逻辑漏洞、工具、SQLmap、NMAP、BP、MSF…还有我视频里讲的案例源码和对应的工具包,需要的话也可以拿走。

Python_0011的博客 2万+
上一篇: mysql数据库执行mysqladmin flush-hosts方法
下一篇: /etc/inittab文件详解
Tobiu
博客等级 码龄10年 51粉丝 87原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值