【无标题】

M92 E92.640000
M190 S60.000000
M109 S210.000000
;Sliced at: Wed 04-12-2019 20:39:58
;Basic settings: Layer height: 0.2 Walls: 0.8 Fill: 20
;Print time: 59 minutes
;Filament used: 2.708m 8.0g
;Filament cost: None
;M190 S60 ;Uncomment to add your own bed temperature line
;M109 S210 ;Uncomment to add your own temperature line
G21        ;metric values
G90        ;absolute positioning
M82        ;set extruder to absolute mode
M107       ;start with the fan off
G28 X0 Y0  ;move X/Y to min endstops
G28 Z0     ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0                  ;zero the extruded length
G1 F200 E3              ;extrude 3mm of feed stock
G92 E0                  ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing...
 
;Layer count: 250
;LAYER:-2
;RAFT
G0 F9000 X70.699 Y72.424 Z0.300
;TYPE:SUPPORT
G1 F1200 X71.320 Y71.910 E0.10054
G1 X72.120 Y71.371 E0.22086
G1 X72.666 Y71.071 E0.29856
G1 X73.699 Y70.614 E0.43945
G1 X74.884 Y70.287 E0.59277
G1 X75.607 Y70.181 E0.68391
.......