VCore, VDD, VDDQ, VDDR, VDIMM.. Help!

本文详细解释了计算机硬件中各种电压术语的意义,包括VCore、VDD、VDDQ等,涉及CPU、GPU及内存供电,并介绍了电气工程中正负电压的使用。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

What do all of these terms mean? Well, that is what this article is here to tell you.

For overclockers

In the computer enthusiast world the terms are not fully defined. The most used meanings are following:
VCore: The core supply voltage of an 'important' chip like your CPU or GPU, usually not the Northbridge. Most frequently used to indicate CPU voltage.
VDD: The supply voltage to your Northbridge chip or the supply voltage for the input buffers and core logic of your memory chips (mostly on graphic cards).
VDDQ: The supply voltage to the output buffers of a memory chip.
VTT: Tracking Termination Voltage. Compared to VREF to determine Hi/Lo
VMem: Supply voltage to a memory chip.
VDDR, VDimm: Supply voltage to the memory on your motherboard.
VRef: Reference voltage for the input lines of a chip that determines the voltage level at which the threshold between a logical 1 and a logical 0 occurs. Usually 1/2 VDDQ.
VGPU: The supply voltage to your graphic card's processor.

Terms used by ATI internally:

VDDC: GPU Voltage
MVDDC: Memory Core Logic Voltage
MVDDQ: Memory Voltage supplied to the output buffers of the video card memory.
VTT: Termination Tracking voltage for video card memory.

Electrical Engineering Information

Positive voltages:
Vcc- Positive supply voltage of a Bipolar Junction Transistor.
Vdd- Positive supply voltage of A Field Effect Transistor

Negative voltages/ground:
Vee- Negative supply voltage of a Bipolar Junction Transistor.
Vss- Negative supply voltage of A Field Effect Transistor.

The letters c,d,e and s originated from the name of the legs of the transistors Collector, Drain, Emitter and Source.

The absolute distinctions between these common supply terms has since been blurred by the interchangeable application of TTL and CMOS logic families. Most CMOS (74HC / AC, etc.) IC data sheets now use Vcc and Gnd to designate the positive and negative supply pins.

The doubled suffix indicates that the voltage is "common", i.e. it is the supply voltage to one or more collectors (in the case of cc) and not just the voltage at a specific collector. Similarily, Vee is a common voltage for all emitters etc.
 
### 关于 Net 'vdd1p8' 与 'vdd!' 短路错误的解决方案 在处理 `Net 'vdd1p8'` 和 `'vdd!'` 的短路问题时,可以参考以下方法来排查和解决问题: #### 错误分析 短路通常发生在电路设计中两个不应相连的网络意外连接在一起的情况。这种问题可能由多种原因引起,例如布局布线中的冲突、电源分配不均或者仿真工具配置不当等问题[^1]。 #### 解决方案 以下是针对该问题的具体解决措施: 1. **检查项目配置** 使用 Visual Studio 打开项目的解决方案文件(`.sln`),重新审视整个项目的构建过程以及目标平台的选择是否正确。如果涉及硬件驱动程序安装,则需按照既定流程完成驱动部署。 2. **验证驱动状态** 对于 Parsec-vdd 类型的应用场景,确认其对应的驱动程序处于正常工作状态,并未受到其他软件干扰而关闭服务功能[^2]。 3. **实施定期 Ping 操作** 根据官方文档建议,在应用层面上设定周期性的 ping 命令发送机制,维持虚拟显示设备之间的稳定链接关系。 4. **监控系统性能指标** 调整或优化当前系统的资源配置情况,防止由于内存泄漏或是 CPU 占用过高所引发的一系列连锁反应影响到最终效果呈现。 5. **升级至最新版软硬件设施** 查阅制造商官网公告栏获取最新的固件补丁包下载地址及时更新客户端界面版本号以便修复潜在漏洞隐患提升整体兼容性和稳定性表现水平。 ```python # 示例代码片段展示如何通过 Python 实现简单的 Ping 功能模拟 import time from subprocess import call def send_ping(interval=60): while True: try: # 替换为实际 IP 地址或主机名 response = call(["ping", "-n", "1", "localhost"]) if response == 0: print("Ping 成功") else: print("Ping 失败") except Exception as e: print(f"发生异常: {e}") time.sleep(interval) if __name__ == "__main__": send_ping() ``` 上述脚本可用于创建一个基础的时间间隔触发器模型来进行持续健康状况探测活动从而减少不必要的中断事件发生的概率大小程度上有所改善用户体验质量标准达到预期目的为止结束本次讨论环节谢谢大家的支持配合! ---
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值