墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
300+累计阅读
356平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
本文系统探讨了基于大型语言模型（LLM）的基础智能体的最新进展与挑战，提出了一个受大脑启发的模块化框架，整合认知科学、神经科学和计算研究的原理。全文分为四个核心部分：
智能体核心组件（Part I）：
自我进化机制（Part II）：
Cadence Virtuoso Layout 版图绘制
画好原理图，打好pin脚（pin最好以全大写的形式书写，以防后续操作中可能出现Bug） 查看所使用工艺库的design rule文件，确定栅格单位设置大小 在准备绘制的原理图界面启动layout XL/GXL 在layout界面按e，设置网格大小与design rule匹配 直接根据原理图生成版图 根据原理图连接关系显示版图中未连接的飞线 查看和更改原理图与版图中器件对应的链接关系 shift + f：显示器件版图细节 版图的构成：元器件（工艺厂商提供）、器件连接、阱连接、IO和PAD模拟电路
【MFRC522】STM32与MFRC522的SPI通信优化及常见问题解析
本文深入解析了STM32与MFRC522进行SPI通信的优化方法与常见问题。从基础的硬件连接到SPI时序优化，再到关键的寄存器配置（如RFCfgReg设为0x4F以提升读卡稳定性），文章提供了详细的调试技巧和实战排坑指南，帮助开发者实现稳定高效的IC读卡应用。
瑞芯微Android固件修改实战：从解包到root提权完整流程（附工具包）
本文详细解析了瑞芯微Android固件深度定制全流程，涵盖从固件包解包、系统镜像修改到植入root提权与分区调整的实战步骤。通过工具链操作与原理剖析，指导开发者安全实现系统精简、权限获取及存储扩容，最终完成固件重新打包与刷机验证，适用于追求设备完全控制权的技术爱好者。
手把手教你用YOLOv5和OpenCV实现DNF全自动刷图（含自动拾取与Boss战逻辑）
本文详细介绍了如何使用YOLOv5和OpenCV构建DNF全自动刷图系统，包括环境配置、游戏画面采集、目标检测、场景导航及操作控制等核心模块。通过实战案例，帮助开发者掌握游戏自动化技术，实现自动拾取与Boss战逻辑，提升游戏效率。
Star CCM+中衍生零部件下的阈值应用与区域内删除目标网格
同样的在绘制网格结束后，有时出现负体积网格或质量差的网格，为了节约时间成本，可能会选择将负体积的网格或质量差的网格删除。弹出相应的窗口，在窗口中选择相应的区域①，选择标量函数②（此处以网格体积变化为例），选择模型③，设置阈值④，选择No Dispalyer，会根据需求选择显示，最后点击Create⑥完成创建。此处以温度为例，若出现温度异常点，首先在①栏中勾选Function，然后在下面点击⑤Select，在弹出的Function窗口中选择温度场函数，再点击④Identify，查找温度异常网格数量。
Oracle EBS 寄销/VMI(1)-->基础设置
名词解释: BPA:一揽子采购协议 BPR:一揽子发放 SR:来源补充规则 ASL:合格供应商列表 VMI: 供应商管理库存 寄售(Consignment)是把货物放在客户那里,客户要用的时候才付款的库存，一般是指卖方把
《从底层结构开始学习FPGA》目录与传送门
《从底层结构开始学习FPGA》目录与传送门
openbmc mctp i3c适配步骤
本文介绍了在Intel OKS平台下，BMC作为I3C从设备如何适配MCTP over I3C的实现方法。主要内容包括：1）关键术语解释，如MDB（Mandatory Data Byte）值为0xAE，DCR（Device Characteristics Register）和BCR（Bus Characteristics Register）的设置；2）适配流程说明，包括BMC作为控制器主节点分配地址后成为MCTP端点，CPU作为总线所有者的角色转换；3）测试验证步骤，展示通过mctp-client工具发送指
SIMATIC S7-1200, S7-1500 PID 控制[手册]
SIMATIC S7-1200, S7-1500 PID 控制[手册]
Probability and Statistics - 4th edition
Probability and Statistics - 4th edition
WINCC7.3破解文件
WINCC7.3硬件够破解文件，有需要的下载！WINCC7.3硬件够破解文件，有需要的下载！
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
超级会员免费看
订阅专栏 解锁全文
2万+
扫一扫
