INF80028 - Business Process Management

损失函数与优化器:从「梯度是怎么被造出来的」到「梯度是怎么被用掉的」 本文揭示损失函数与优化器本质一体:优化器仅依赖损失产生的梯度,而损失决定梯度的方向、尺度与噪声特性。错误的损失选择(如分类用MSE)会导致梯度失衡,使优化器失效;不同损失(如Huber、Focal)通过调控梯度分布影响优化过程。实测表明,归约方式、标签结构与损失配对直接决定梯度行为,进而影响收敛性与泛化。核心观点:选对损失,才是让优化器“看得懂”的前提。 阅读详情

INF80028 - Business Process Management

Semester 2, 2024

Assignment 2 Analysing and Designing To-Be Business Process for Swinburne Cares Foundation

Assignment 2 due on Week 12 Friday 18th  Oct. at 23:59 AEDST Assessment 2 Value = 40%

To be completed individually or within a group. Your submission should include:

•   Submit one copy of the report, Modelling file per group.

•   Submit your group report via Assignment 2 submission link on INF80028 Canvas > Assignment>Assignment 2 information and submission link

•    The Team Contribution Statement (TCS) MUST be completed and included in the appendix of your group report.

•   Assignment 2 Team Charter should be completed and submit via Assignment 2 Team charter submission link on Canvas.

•   Submit     modelling     file     through     modelling     submission     link      on     the Canvas>Assignments>INF80028 Assignment 2 Model Submission links.

Please read the ‘Submission Requirements’ section for details. If you have any queries, you may check with the teaching staff

Assessment 2 Requirements

It  will be  students ’ responsibility  to  find  additional  information  that  may  be  needed  for completing the assignment.

As a team,you need to review the proposals (Assignment 1) that each member puts forward for submission. You need to discuss each proposal on its merits and decide which one(s) will be best suited to use as your foundation for this assessment (Assignment 2)*. This will ensure that as a team you agree on the starting point for your assessment.

*Note  that  forming  assignment  2  groups  are  students’  responsibilities.  We  will  provide instructions for you to self-enrol into a group. You should do this before we post assignment 1 results, your decision is not biased by results and feedback from the INF80028 assignment 1. However, this does not include those students who have not submitted assignment 1. If you applied for an extension to assignment 1, you should inform. your group members. For those students received more than 3 days extension, I will delete your name from the group and add you back in after you submit assignment 1.

Outline

This assignment requires you to continue working on the business and process(es) of Swinburne Logistics  Group.  As  the  current  various  donation  processes  do  not  work  efficiently, management wishes to improve the process(es) by using the best practices, methodologies, technologies and BPMS. The purpose of this assignment is to improve the process(es) in away that addresses the problems.

Firstly, the project team needs to finalize the key problems faced by the business and the process(es)  which  some  of  the  problems  each  group  member  has  already  identified  in assignment   1.   In   this   assignment,   you   are   required   to   discuss   each   member’s  key problems/issues’ list and summarize them as the starting point ofthe assignment 3. You should also add problems which members consider are important, but they are not listed in assignment 1(s). For all new add problems, you need to provide a clear and detailed explanation of your decisions. For the ones you have already discussed in assignment 1(s), you don’t need to repeat, and you can quote members’ assignment 1(s) as references. You have to be realistic and need to consider business capacities when you discuss problems, provide suggestions and solutions.

Similar to assignment 1, for this assignment you are asked to present a report.

Your work should include two parts.

Your Tasks

Part 1: Business Process Modelling (All models and tables should be added in appendix):

As in assignment 1, you had designed 4 or 5 separate process models. In assignment 3, you should design a process layer, construct a main process model to include all subprocesses. The 4 or 5 models you created in assignment 1, should be modified and as subprocesses in the main process. This means you at least need to have 4 to 6 subprocess icons in the main process model. You can also have sub-processes inside sub-processes resulting in a multi-layered design. For examples, if you consider regular donation subprocess is complicated, you can move some information such as communicate with banks as a subprocess. The number of sub-processes you have, depends on your own model design. Each diagram should occupy no more than one page.

•         Correct the models you drew  in the previous  assignment based on the  feedback given by teaching  staff (A  set  of corrected  models  should  be  in  the  report appendices).

•         Design Logistics Group processes with clear layers. You should firstly create a main process which include individual models created in assignment 1as subprocesses. The process should be called Swinburne Logistics Process. This process presents all information start from contract received until payment completed. (A set of level 2 AS-IS models should be in the report appendices). Secondly, to followup ‘model should be concise, main process and subprocesses should not have repetitive tasks, you should re-draw all process models (you created in assignment 1) which remove all repetitive tasks.

•         Design  a new process(es)  (TO-BE models) using BPM level 2 modelling which addresses  the  problems  you  have  identified,  and  you  suggest  can  feasibly  be implemented. You should be innovative and creative, which think out of the box. Your solutions should solve the major issues of the current business processes. It is not just simply removing a task or add a task or add a communication. (A set of level 2 TO-BE models should be in the report appendices).

•         All level 2 models should be labelled correctly in the model file (such as Bizagi file should include all models).

Advice on modelling format:

The following requirements are for the as-is and to-be model(s).

•   Model the process in BPMN using the modelling software. You have to copy all models into your report appendix. The original modelling file is also required to be submitted through the modelling submission link.

•   Each diagram should occupy no more than one page.

•   All models in the file must be printable as is, within margins and all diagram elements legible.  Layout  your  diagrams  to  ensure  all  contents  are  readable  when  your submission   is   printed   on   A4   paper.   Check   the   final   result   is   readable. Indecipherable content cannot be assessed and will attract a mark of zero.

•   The models must be formatted in a logical and elegant way. The models should adhere to the qualities mentioned in the lectures.

•   You must have a clear layer of processes which should include main and a set of sub- processes.

•   The process modelled should match what you have described in your analysis report. If the suggested solutions do not impact on how your models look, you need to provide a brief explanation.

•   The views of models must be consistent with each other, enabling the whole analysis to make sense.

Part 2: Business Process Improvement Recommendation

You  are  required  to  provide  recommendations  for  the  possible  changes  to  the  business process(es) or to the way they are managed which you consider will add value to their business and why they are more efficient and effective compared with the existing models.

You should carefully read the diagrams and link them to the key issues and consider if there are possibilities to alter the diagrams based because of your recommendations for solving problems (for example, combine the tasks, reduce double handling …). If so, you should provide the new to-be process diagram(s). If not, then should indicate why they do not affect the models.

Resources allocation and performance

For  solving  problems/issues,  you  also  need  to  consider  the  resources  allocation  and performance. For example:

1.   Where is the process bottleneck?

2.   How to better organize staff and allocate jobs to achieve 80% utilization?

You don’t need to provide accurate numbers; general discussion and analysis will be efficient.

Best practices

In assignment 1, for each issueselected, you have stated the Best Practices (details can be found in lessons 5 & 6 Overviews) you will apply. In assignment 2, you should review each member’s discussion in assignment 1, and firstly list all key issues (not the only 5, you should go through the processes and identify all key issues), secondly apply best practices to each issue. If you have already discussed in Assignment 1(s), you can use them as references and quote them in your report. Your selected best practices should be summarized in the table provided. The best practices should be presented in the TO-BE models. Please keep in mind that many different best practices might be used for one issue or problem. Also, for one issue/problem, may need to adopt multiple best practices. So, group members should discuss and select one or more than one which best meet requirements. The following table to summarize your discussion(s). Please notes that industry best practices also can be considered. The table can be put in an appendix.

a.     Issue

b.    Best

Practice/

c.     Application

Description

and/or     Solution Explanation

d.    Advantages

e.     Disadvantages

Methodologies

You also need to consider approaches (methodologies), Lean, Six Sigma & Lean Six Sigma. Which of them is best suited for substantially improving the Swinburne Cares Foundation process and why? You will also need to provide a discussion summarising how Swinburne Cares Foundation processes will now operate and be improved if your recommendations are implemented which provides a holistic picture of the new process(es).

Advice on Best practices:

•   Of the Best Practices mentioned in the lecture, only the Customer, BP Operation and Behaviour Best Practices have an effect on the BPMN diagrams. The other Best Practices, especially the Organization/Resources Best Practices have little or no effect on the diagrams. Therefore, it is advisable to apply Customer, BP Operation and Behaviour Best Practices before Process Automation.

•   Many of the Best Practices apply to a specific part of the process. It must be clearly stated how and where the Best Practice is applied in the process, preferably in column c. For example, if applying the Activity Elimination Best Practice, it must be clear what activity is being eliminated.

•   Your applications of cited Redesign Best Practices form. a set of recommendations for process improvement. Your recommendations must be consistent as a whole. That is, they must all be able to be applied together to obtain a consistent and coherent To-Be process.

•   To address a single problem, it might be necessary that more than one Best Practice will be required. In addition, once a Best Practice is applied potentially more than one problem will be addressed.

Report Submission Requirements (All 2 parts)

Submit a single MSWord document. Archives with multiple files and/or subfolders will not be accepted.

•   A word-processed report with no more than 3000 +/-10% words which includes:

o Executive Summary (not included in the word count)

o Table of Contents (not included in the word count)

o Introduction

o The main body  (Discussion  addressing the Task Requirements, you  should provide  preferable  subtitles  for  each  section  in  this  part,  e.g.,  Problem identification  and  analysis;  Recommendations  for  possible  changes  to  the business process (es) by adopting best practices and methodologies)

o Brief recommendations for a change management plan

o Conclusion

o References (not included in the word count)

You MUST use the Harvard Referencing  style. throughout your report  and include an accurate list of references at the end of the report. You can access the correct         style. from         the          library:          Harvard         System

(http://www.swin.edu.au/lib/guides/harvard_system.pdf) or APA.

o Appendices

    BPMN diagrams should be put in an appendix.

    Other model relevant documents, such  as  tables  to  explain  model elements.

    Best practices summary table.

•   Pages of the report should have appropriate headers and footers and should include printed page numbers.

•    Size 12 and 1.5 line space.

微信小程序一键登录和临时code用JWT进行微信用户授权 2、跨域进行调用接口时候,唯一标识UnionID和会话密钥 session_key如果还是用的我自己的,会出现无法调用微信服务器接口,就需要将唯一标识和会话密钥换成前端的,才可以,我自己认为这样很不合理,暂时还没有找到原因。2、能够获取到openId,但是也只能获取到openid,无法获取用户的相关信息,经过查阅官网发现,现在微信那边已经将用户信息加密,需要调用提供的接口进行解密然后获取用户数据,问题原因已经找到解决方法,还未即使更改。1、我这是一台电脑实现的前端调用后端接口,不用考虑跨域的问题。 阅读详情

相关推荐

从3D相机数据到三维模型:Halcon实战深度图、亮度图与点云转换全流程

本文详细解析了如何利用Halcon将3D相机采集的深度图、亮度图转换为三维点云模型的完整流程。通过实战案例分享,涵盖数据格式处理、点云生成方法(SDK接口与纯Halcon实现)、三维模型可视化优化等关键技术,帮助工程师解决工业检测中的实际难题,提升三维重建精度与效率。

weixin_42525005的博客 397

INF80028 – Business Process Management Semester 2 2024 2Haskell

80028 -BusinessProcessManagementthAEDSTgroup.•SubmitonecopyofthereportModellingfilepergroup•SubmityourgroupreportviaAssignment2submissionlinkonINF80028CanvasAssignmentAssignment2andsubmission。

bilimint的博客 822

ABAP_自定义屏幕07—下拉列表框

ABAP_自定义屏幕07—下拉列表框 完成以下:页面中有下拉列表框,下拉框value=系统表SCRR的值 1、实现方法A-常用 1.1 在主程序定义字段 TYPES:BEGIN OF type_carrid, carrid LIKE scarr-carrid,"航线代码 carrname LIKE scarr-carrname,"航向名称 END OF type_carrid. DATA g_it_carrid TYPE STANDARD TABLE OF type_carrid

f346348157的博客 3873

低温ECR-MOCVD生长(002)GaN:椭偏仪测厚与电学性能

本研究用ECR-MOCVD在Si(111)和蓝宝石衬底上低温生长GaN薄膜,蓝宝石1.0SCCM、2h样品呈完全(002)择优取向,椭偏仪测厚32.81nm,迁移率10.42cm²/(V·s)。文章梳理了生长温度、TMGa流量与生长时间对结晶取向、膜厚、粗糙度、光学带隙和电学性能的影响。

Flexfilm_的博客 402

Python 上位机开发

首先,什么是上位机?上位机通常是指可以与下位机(如单片机、传感器等硬件设备)进行通信和交互,实现数据采集、控制指令发送以及数据处理和展示的计算机程序。 Python 作为一种高级编程语言,在开发上位机方面具有诸多优势。它拥有丰富的第三方库,使得开发过程变得相对简单和高效。

weixin_46807151的博客 4304

From Manual to Magic: How nnU-Net is Revolutionizing Biomedical Image Segmentation Without Human Int

本文探讨了nnU-Net如何通过全自动深度学习技术革新生物医学图像分割领域。作为自我配置的智能系统,nnU-Net无需人工干预即可完成从数据预处理到模型训练的全流程,显著提升医学影像分割的效率和精度,尤其在CT和MRI影像分析中表现卓越。

metal的博客 1085

【第84期】过拟合欠拟合与复杂度对照的实验与排查

系列:《从小白到 AI 大模型开发工程师的进阶之路》 技术点:AI-0306 过拟合与欠拟合 主人公:小蓝伞 前置:AI-0302 本期产出:学习曲线小蓝伞用越来越高次的多项式拟合一条带噪曲线,训练误差继续下降,但这不能说明他更接近真实关系。本期固定训练样本与噪声,只改变多项式次数,比较对训练点和无噪参考曲线的误差,并区分验证曲线与学习曲线。教学情境用来组织问题,下面的执行数据来自构造实验。

qq_36085846的博客 201

【Coze 扣子案例】第 23 期・商业篇:一键获取精准商机,自动化招标信息查询与分析

通过地区和项目类型等多维度组合查询全国招标信息网数据,实现招标公告的快速定位。自动解析招标公告内容,提取关键信息,并生成结构化摘要。帮助企业高效获取精准商机,提升市场竞争力,降低人工成本,解决 “信息过载” 与 “精准匹配难” 的双重问题。

weixin_72689845的博客 1929

小批量训练的JAX机器学习

本文介绍基于BFGS的小批量训练算法,针对全批量方法在高样本量下计算复杂度高的问题,结合JAX的自动微分与高效计算,实现快速收敛。通过optimtool库中的改进的bfgs优化器与小批量策略,支持分类与回归任务,具备早停机制与灵活监控选项,显著提升大规模机器学习训练效率。

林景的博客 142

PLC编程进阶:结构体(UDT)与功能块(FB)的模块化实践指南

本文深入探讨了PLC编程中实现模块化的核心方法,重点解析了结构体(UDT)与功能块(FB)的协同应用。通过将零散数据封装为UDT,并将控制逻辑打包为可复用的FB,能够构建出结构清晰、易于维护和调试的PLC程序。文章结合拧紧枪、电机控制等实战案例,提供了从设计原则到分层架构的完整实践指南,旨在帮助工程师将混乱的‘面条式’代码改造为高效的‘正规军’。

s3t4u的博客 222

【PowerBI专栏】PowerBI导入MYSQL数据库

本文介绍了在PowerBI中连接MySQL数据库的方法。首先需要下载并安装MySQL官方.NET连接驱动(推荐8.4.0版本),安装完成后重启PowerBI。连接时需填写服务器IP和数据库名称等必填参数。文章详细说明了连接配置步骤,包括账户设置、数据表选择以及可能遇到的数据格式转换问题处理。最后指导用户完成数据清洗后进入PowerPivot进行后续计算。特别提醒最新9.4版本可能存在兼容性问题,建议使用稳定的8.4版本连接器。

技术与管理的平衡木- 698

新品快讯 | ROHM支持GaN高频开关的TP-PFC控制器IC

另一方面,传统的TP-PFC控制技术广泛使用MCU,但对于小型电源设备而言,除了功耗、电路规模和成本方面的挑战外,如何实现针对GaN HEMT高频开关的控制也成为亟需解决的难题。全球知名半导体制造商ROHM(总部位于日本京都市)宣布,开发出有助于实现小型高效率AC-DC电源的Totem Pole PFC*1(图腾柱PFC,以下简称“TP-PFC”)控制器IC“BM85060FV”,其特点是可在支持GaN HEMT*2高频开关的MHz频段工作。GaN(氮化镓)是一种用于新一代功率元器件的化合物半导体材料。

ONEYAC唯样的博客 227

时间序列预测 | Python实现LSTM时间序列数据预测

目录LSTM神经网络LSTM原理LSTM数据下载LSTM程序设计导入Python包时序数据处理LSTM模块定义模型训练模型评估参数设定运行结果参考资料致谢 LSTM神经网络 长短期记忆网络——通常简称为“LSTM”——是一种特殊的 RNN,能够学习长期依赖关系。它们由Hochreiter & Schmidhuber (1997)引入,并在后续工作中被许多人提炼和推广。1它们在处理各种各样的问题时效果非常好,现在被广泛使用。LSTM 被明确设计为避免长期依赖问题。长时间记住信息实际上是他们的默认行为

前程算法屋的博客 3912

从认识人工智能到理解机器学习:我的 AI 入门第一课

正式开始学习人工智能之前,我对 AI 的认识其实比较模糊:知道 ChatGPT、知道大模型,也知道现在很多岗位都在谈 AI,但如果有人问我“人工智能到底是什么”“机器是怎么学会识别一只猫的”,我未必能从头到尾讲清楚。上午的课程更偏向行业全景:人工智能的发展、研究方向、NLP、岗位分工、学习路线和 AI Coding 工具。下午的课程更偏向技术基础:机器学习的原理、有监督学习、深度学习、模型训练和评估方法。

chh563的博客 566

efm32 入门.pdf

本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

Hugging Face:成为机器学习界的“Github”

以下文章来源于OneFlow,作者OneFlow社区五年前,AI领域的知名研究者Andrej Karpathy发文称,传统人工编程属于“软件1.0”,“软件2

2601_96798011的博客 153

最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版

Part-E1-SDIO-Specification-Ver4.00-Final-120220.pdf:最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版,包括SDIO 接口的外设,SDIO 接口官方协议等。

机器学习基础|监督学习、标签、回归

网约车预估等待时长依赖监督学习中的回归任务。平台利用历史订单数据,以司机实际到达耗时为标签,通过上车点、时间、运力、路况等特征训练模型。模型不断优化预测值与真实耗时的误差,最终对新订单输出连续的预估等待时间,实现精准预测。

weixin_43971465的博客 278

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

机器学习——混淆矩阵(待更新)

二元: true表示真实==预测,positive表示预测值=1.

m0_61175448的博客 179

Spark06_MLlib机器学习

本文是《PySpark 从入门到实战》系列收官篇,带你用 Spark MLlib 走通机器学习全流程:从三要素与 7 步标准流程讲起,剖析 KNN、朴素贝叶斯、决策树三大算法原理,再以 KNN 手写、垃圾短信分类、决策树分类、逻辑回归鸢尾花(准确率 96.67%)、K-Means 聚类(轮廓系数 0.7345)五个案例落地,最后详解 TF-IDF 文本特征与余弦相似度。全文代码可直接运行,适合有 RDD 与 Spark SQL 基础的开发者快速上手。

2301_80420058的博客 484

LoRA的低秩数学与QLoRA实现

本文系统解析了LoRA及其进阶版QLoRA在十亿参数模型微调中的高效机制。通过低秩假设,将权重更新量ΔW近似为低秩矩阵积,显著压缩可训练参数与显存占用;QLoRA进一步将基座模型量化至4比特(NF4),结合双重量化与分页优化器,实现65B模型单卡微调。文章详解了B初始化为零、缩放系数α/r设计、挂载位置选择等关键实操细节,并给出可运行代码。实践表明:4比特基座+高精度LoRA在多数任务上媲美全参微调,且训练效率极高。超参方面,r不宜过大,学习率需上调,数据质量重于数量。最后强调:LoRA适用于风格适配与领域

2601_96733043的博客 343

AI小白入门|无监督学习到底是什么?

很多新手看完无监督学习的定义只会死记硬背。本文避开复杂公式,从真实业务场景切入,对比监督学习,讲清楚无监督学习的核心价值、适用场景、底层逻辑和容易踩坑的认知误区,帮你理解它在机器学习链路里的定位。

weixin_43971465的博客 205

SVM支持向量机通俗解析:找到机器学习的“最优分界线”

一、爆款钩子:同样是画分界线,为何SVM能成为机器学习的“王者选手”?做机器学习的人,几乎都绕不开一个问题:如何给混乱的数据“分家”?有人用逻辑回归,有人用KNN,但有一个算法

2601_96798737的博客 167

机器学习03,端到端02

个人笔记

qq_59247073的博客 291

GaN 动态导通电阻测试专题:电流崩塌从哪来,测量窗口怎么选

但器件装到实际电路上跑一段时间,或者用双脉冲台架模拟开关工况再测导通压降,数值往往明显高于手册静态值,而且关断应力越强(母线电压越高、应力保持越久),抬升越明显;:使用钳位电压探头,把示波器通道的工作区间限制在低电压区(常见做法是钳位在 1.5V 附近的导通压降区),应力高压段由钳位电路吸收,导通段以高分辨率采样。台架搭建相对简单,是器件表征最常用的方案。双脉冲台的难点不在发脉冲,而在采样:漏源电压要从几百伏的应力电平瞬间跌落到毫伏至伏级的导通压降,示波器单一量程难以兼顾"扛住高压"和"分辨毫伏"。

Namisooft的博客 274

《机器学习sklearn实战教程》02|Python机器学习开发环境搭建

2.1 为什么要先搭环境很多人学机器学习,卡住的第一步不是算法,而是环境。代码明明照着教程敲了,却一运行就报错。不是缺包,就是版本冲突。最常见的情况是,昨天还能跑,今天装了个新库

2601_96798011的博客 247

CAGR 21.8%:GaN功率器件封装材料市场从3.23亿美元迈向12.77亿美元

随着氮化镓(GaN)功率半导体在消费快充、AI服务器电源及车载电源领域的加速渗透,GaN功率器件封装材料作为实现芯片贴装、电气互连、热量传导和长期可靠性保障的核心功能性材料,正迎来爆发式增长期。根据LP Information(路亿市场策略)初步调研,2025年全球GaN功率器件封装材料市场规模约为3.23亿美元,2026年预计约3.91亿美元,2032年将达到12.77亿美元,2026—2032年复合增长率(CAGR)高达21.8%。

LPIHelen的博客 205

《机器学习》笔记

知道特征工程是什么:利用专业背景知识和技巧处理数据,让机器学习算法效果最好。这个过程就是特征工程。数据和特征决定了机器学习的上限,而模型和算法只是逼近这个上限而已。理解特征提取的作用:原始数据中提取与任务相关的特征,构成特征向量。新数据 = 特征提取(原数据)理解特征预处理的作用:特征对模型产生影响,因量纲(单位)问题,有些特征对模型影响大,有些影响小。有两种思路,归一化和标准化(重点),归一化公式为:(当前值-最小值)/(最大值-最小值),使映射的值域在(0~1)之间。

weixin_51781852的博客 238
上一篇: Applied Econ 440.602: Macroeconomic Theory
下一篇: FINA865-2024V2 Financial Risk Management
WX_codehelp
博客等级 码龄2年 700粉丝 87原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值