【图像隐写】LSB+DWT数字水印嵌入+提取+检测+攻击【含GUI Matlab源码 833期】

💥💥💥💥💥💥💥💥💞💞💞💞💞💞💞💞💞Matlab武动乾坤博客之家💞💞💞💞💞💞💞💞💞💥💥💥💥💥💥💥💥
🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚤🚀🚀🚀🚀🚀🚀🚀🚀🚀🚀

🔊博主简介：985研究生，Matlab领域科研开发者；

🚅座右铭：行百里者，半于九十。

🏆代码获取方式：
优快云 Matlab武动乾坤—代码获取方式

更多Matlab图像处理仿真内容点击👇
①Matlab图像处理（进阶版）

⛳️关注优快云 Matlab武动乾坤，更多资源等你来！！

⛄一、DCT数字水印嵌入与提取简介

1 基本DCT变换
目前，基于DCT域的水印方法已经成为数字水印算法研究的热点，它的核心思想就是通过离散傅立叶变换对图像块进行处理后，再选择变换域中的一些系数值依据一定规则来嵌入水印。
由于图像块中DCT系数频带分布由左上角的直流分量DC往下对应的系数频率由低频升至高频，因此在不影响原图质量的前提下，可将水印信息根据能量大小嵌入相应系数频带中。通过图像块量化与水印嵌入结合的处理方法将水印信息均匀分布在图像的整个空间域，在图像裁剪和滤波方面，变换域的水印比在空间域的更能表现出一定的鲁棒性。

2 水印算法描述
2.1 水印嵌入算法
该算法采用加性嵌入的方式在经过DCT变换后的子图像块的中频域中，选取隐秘位置嵌入水印信息，具体的嵌入流程如下图1所示：

图1 分块水印嵌入流程
(1）分块处理：设宿主图像为P，将其分块处理为8*8的K个子块。
(2）水印预处理：设水印图像为W，对其进行互补变换，变换后的水印图像和变换前的水印图像相互补。
(3）对水印图像进行Arnold置乱变换，并依据混沌映射规则，选取密钥混沌序列并与水印序列异或运算，将置换次数和异或运算处理后的结果分别作为水印嵌入算法的密钥1和密钥2。
(4)DCT变换：对各子块内做DCT变换，利用zig-zag对DCT系数进行扫描，得到第k块子图像块的序列为Zk(i),i=0,1,2，…63.
(5）水印嵌入算法：依据zig-zag排序，在各子块的中、低频段选取特定系数x(m）和x(n），在系数坐标（a,b）和（c,d）处嵌入水印信息图像W，并将其作为密钥3。同理，嵌入互补水印图片W’，并将嵌入的位置作为密钥4。水印嵌入的方法如下：


(6)IDCT变换：将每一个子图像块作二维DCT逆变换。
(7）子块合并：将每一个子块合并成嵌入水印的图像P’。

2.2 水印提取算法
将嵌入水印的图像P’分块处理，并对各子块进行二维DCT变换，由密钥3和4推断所选择的水印系数，若x(m）≤x(n），则水印信息为0，若x(m)>x(n），则水印信息为1，再利用密钥1和2将初步水印的信息解密再进行Arnold逆变换，最终提取出水印信息。

2.3 水印检测算法
本文通过计算峰值信噪比PSNR的值评价嵌入水印的宿主图像的质量，一幅m和n的图像，PSNR度量标准定义为：

归一化相关系数NC的值判断嵌入水印的图像与宿主图像的相似度，其定义为：

⛄二、部分源代码

function varargout = watermaked(varargin)
% WATERMAKED M-file for watermaked.fig
% WATERMAKED, by itself, creates a new WATERMAKED or raises the existing
% singleton*.
%
% H = WATERMAKED returns the handle to a new WATERMAKED or the handle to
% the existing singleton*.
%
% WATERMAKED(‘CALLBACK’,hObject,eventData,handles,…) calls the local
% function named CALLBACK in WATERMAKED.M with the given input arguments.
%
% WATERMAKED(‘Property’,‘Value’,…) creates a new WATERMAKED or raises the
% existing singleton*. Starting from the left, property value pairs are
% applied to the GUI before watermaked_OpeningFunction gets called. An
% unrecognized property name or invalid value makes property application
% stop. All inputs are passed to watermaked_OpeningFcn via varargin.
%
% *See GUI Options on GUIDE’s Tools menu. Choose “GUI allows only one
% instance to run (singleton)”.
%
% See also: GUIDE, GUIDATA, GUIHANDLES

% Edit the above text to modify the response to help watermaked

% Last Modified by GUIDE v2.5 26-May-2008 14:22:42

% Begin initialization code - DO NOT EDIT
gui_Singleton = 1;
gui_State = struct(‘gui_Name’, mfilename, …
‘gui_Singleton’, gui_Singleton, …
‘gui_OpeningFcn’, @watermaked_OpeningFcn, …
‘gui_OutputFcn’, @watermaked_OutputFcn, …
‘gui_LayoutFcn’, [] , …
‘gui_Callback’, []);
if nargin && ischar(varargin{1})
gui_State.gui_Callback = str2func(varargin{1});
end

if nargout
[varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
else
gui_mainfcn(gui_State, varargin{:});
end
% End initialization code - DO NOT EDIT

% — Executes just before watermaked is made visible.
function watermaked_OpeningFcn(hObject, eventdata, handles, varargin)
% This function has no output args, see OutputFcn.
% hObject handle to figure
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
% varargin command line arguments to watermaked (see VARARGIN)

% Choose default command line output for watermaked
handles.output = hObject;
handles.contain=imread(‘nvlang512x512.jpg’); % 读入载体图
handles.name=imread(‘name32x32.bmp’); % 读入水印
handles.sel=0; % 不加攻击
handles.jpeg=0;
handles.gau=0;
handles.salt=0;
handles.ang=0;
handles.filt=0; % 不滤波
set(handles.edit3,‘string’,handles.jpeg); % 文本框设置为0
set(handles.edit2,‘string’,handles.jpeg);
set(handles.edit1,‘string’,handles.jpeg);
set(handles.edit7,‘string’,handles.ang);
guidata(hObject, handles);
guidata(hObject, handles);
% Update handles structure
guidata(hObject, handles);

% UIWAIT makes watermaked wait for user response (see UIRESUME)
% uiwait(handles.figure1);

% — Outputs from this function are returned to the command line.
function varargout = watermaked_OutputFcn(hObject, eventdata, handles)
% varargout cell array for returning output args (see VARARGOUT);
% hObject handle to figure
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)

% Get default command line output from handles structure
varargout{1} = handles.output;

% — Executes on button press in pushbutton1.
function pushbutton1_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton1 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
contain_ind=rgb2gray(handles.contain); % 灰度图象 可以接受
figure,imshow(uint8(contain_ind)); title(‘原始图象’);

guidata(hObject, handles);

% — Executes on button press in pushbutton2.
function pushbutton2_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton2 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)

figure,imshow(handles.name);title(‘水印’);

guidata(hObject, handles);

% — Executes on button press in pushbutton3.
function pushbutton3_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton3 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
[handles.contain_lsb,handles.bit]=LSB;
figure,imshow(handles.contain_lsb);
handles.pnsr=PSNR(handles.contain,handles.contain_lsb);
title_string=strcat(‘含水印的图象(时域) PNSR:’,num2str(handles.pnsr));
title(title_string);

guidata(hObject, handles);

% — Executes on button press in pushbutton4.
function pushbutton4_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton4 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
handles.watermarked_lsb=LSBextract(handles.contain,handles.contain_lsb,handles.name,handles.bit,handles.sel,handles.gau,handles.salt,handles.jpeg,handles.filt,handles.ang);
figure,imshow(uint8(handles.watermarked_lsb));title(‘提取的水印（时域）’);

guidata(hObject, handles);

% — Executes on button press in pushbutton20.
function pushbutton20_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton20 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)

delete(get(0,‘children’));
clear all;

% — Executes on button press in pushbutton5.
function pushbutton5_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton5 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
[handles.contain_marker_dwt,handles.SORT_IND]=testname;
figure,imshow(uint8(handles.contain_marker_dwt));title(‘含水印的图象（小波域）’);

handles.pnsr=PSNR(handles.contain,handles.contain_marker_dwt);
title_string=strcat(‘含水印的图象(小波域) PNSR:’,num2str(handles.pnsr));
title(title_string);
guidata(hObject, handles);

% — Executes on button press in pushbutton6.
function pushbutton6_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton6 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)
handles.name_ex_dwt=extract_name(handles.contain,handles.contain_marker_dwt,handles.SORT_IND,handles.sel,handles.gau,handles.salt,handles.jpeg,handles.filt,handles.ang);
figure,imshow((handles.name_ex_dwt));title(‘提取的水印（小波域）’);
guidata(hObject, handles);

% — Executes on slider movement.
function pushbutton7_Callback(hObject, eventdata, handles)
% hObject handle to pushbutton7 (see GCBO)
% eventdata reserved - to be defined in a future version of MATLAB
% handles structure with handles and user data (see GUIDATA)

% Hints: get(hObject,‘Value’) returns position of slider
% get(hObject,‘Min’) and get(hObject,‘Max’) to determine range of slider
[handles.contain_marker_dwt_times,handles.SORT_IND,handles.name1]=name_imbed;
figure,imshow(uint8(handles.contain_marker_dwt_times));title(‘含水印的图象（改进的小波域）’);
handles.pnsr=PSNR(handles.contain,handles.contain_marker_dwt_times);
title_string=strcat(‘含水印的图象(改进的小波域) PNSR:’,num2str(handles.pnsr));
title(title_string);

guidata(hObject, handles);

⛄三、运行结果

⛄四、matlab版本及参考文献

1 matlab版本
2014a

2 参考文献
[1]万谊丹.基于Arnold和DCT的抗剪切攻击图像水印研究[J].网络安全技术与应用. 2021,(08)

3 备注
简介此部分摘自互联网，仅供参考，若侵权，联系删除

🍅 仿真咨询
1 各类智能优化算法改进及应用
生产调度、经济调度、装配线调度、充电优化、车间调度、发车优化、水库调度、三维装箱、物流选址、货位优化、公交排班优化、充电桩布局优化、车间布局优化、集装箱船配载优化、水泵组合优化、解医疗资源分配优化、设施布局优化、可视域基站和无人机选址优化

2 机器学习和深度学习方面
卷积神经网络（CNN）、LSTM、支持向量机（SVM）、最小二乘支持向量机（LSSVM）、极限学习机（ELM）、核极限学习机（KELM）、BP、RBF、宽度学习、DBN、RF、RBF、DELM、XGBOOST、TCN实现风电预测、光伏预测、电池寿命预测、辐射源识别、交通流预测、负荷预测、股价预测、PM2.5浓度预测、电池健康状态预测、水体光学参数反演、NLOS信号识别、地铁停车精准预测、变压器故障诊断

3 图像处理方面
图像识别、图像分割、图像检测、图像隐藏、图像配准、图像拼接、图像融合、图像增强、图像压缩感知

4 路径规划方面
旅行商问题（TSP）、车辆路径问题（VRP、MVRP、CVRP、VRPTW等）、无人机三维路径规划、无人机协同、无人机编队、机器人路径规划、栅格地图路径规划、多式联运运输问题、车辆协同无人机路径规划、天线线性阵列分布优化、车间布局优化

5 无人机应用方面
无人机路径规划、无人机控制、无人机编队、无人机协同、无人机任务分配

6 无线传感器定位及布局方面
传感器部署优化、通信协议优化、路由优化、目标定位优化、Dv-Hop定位优化、Leach协议优化、WSN覆盖优化、组播优化、RSSI定位优化

7 信号处理方面
信号识别、信号加密、信号去噪、信号增强、雷达信号处理、信号水印嵌入提取、肌电信号、脑电信号、信号配时优化

8 电力系统方面
微电网优化、无功优化、配电网重构、储能配置

9 元胞自动机方面
交通流 人群疏散 病毒扩散 晶体生长

10 雷达方面
卡尔曼滤波跟踪、航迹关联、航迹融合