jsp中获取list的长度

【笔记】使用OrCAD对电路进行蒙特卡洛分析和最坏分析 使用OrCAD对电路进行蒙特卡洛分析和最坏分析 阅读详情

The function size must be used with a prefix when a default namespace is not specified

当未指定默认名称空间时,函数大小必须与前缀一起使用

原来:${******List.size()}获取该list的长度,但是jsp页面不允许这么写的

 

改为${fn:length(******List)},改为这样子后是布尔类型了

 

<c:if  test="${fn:length(******List)>=0}"

这样就是true和false

 

火山引擎实时对话AI实战:5分钟搞定WebRTC+大模型+ASR/TTS全链路集成 本文详细介绍了如何利用火山引擎的实时对话AI解决方案,快速集成WebRTC、大模型、ASR和TTS服务,构建低延迟、高保真的实时语音对话应用。通过实战代码示例,从环境准备、音频流管理到全链路串联与性能优化,为开发者提供了一套端到端的集成指南,适用于智能客服、在线教育等互动场景。 阅读详情

相关推荐

大华摄像头GB28181协议接入EasyCVR全流程(附常见错误排查)

本文详细阐述了大华摄像头通过GB28181协议接入EasyCVR视频管理平台的全流程,涵盖从核心原理、前期参数规划、Web界面配置到平台侧验证的完整步骤。重点针对网络端口、SIP参数配置等关键环节提供了深度排错指南,并总结了设备无法注册、在线不稳定、拉流失败等常见问题的排查思路与解决方案,旨在帮助安防工程师与系统集成商高效完成设备接入与调试。

weixin_29279153的博客 310

关于The function equals must be used with a prefix when a default namespace is not specified解决

这个问题是典型的tomcat版本冲突: 在使用el表达式的时候, 要判断list 是否为空:${list.size() > 0},这种写法其实是不对的,但是在tomcat7中使用是OK的,但是在tomcat 6 以及之前的版本中是不支持的,所以当是tomcat6的时候,项目不会报错,但是运行时会报错。 解决方法也比较简答:用jstl的fn标签中的length方法 首先在jsp中引入 然后

zeb_perfect的专栏 1万+

拆开一个烧坏的IGBT模块,手把手教你识别过压、过流、过温的“案发现场”

本文详细解析了IGBT模块失效分析的实战技巧,通过观察铝层熔化纹路、焊锡溢出形态等物理痕迹,手把手教你识别过压、过流、过温的典型失效模式。文章提供了从基础工具包到现场快速诊断的完整流程,帮助工程师精准定位IGBT模块失效的根本原因。

weixin_30655569的博客 429

jsp报错The function size must be used with a prefix when a default namespace is not specified

jsp报错The function size must be used with a prefix when a default namespace is not specified 解决方法: 在tomcat7中以下写法没问题,但在tomcat6上就报错了: <c:if test="${rows.size()%2!=0}"> </c:if> 修改...

qq_30908729的博客 1312

从零配置ORB-SLAM3:TUM-VI数据集yaml文件参数调优指南

本文深入解析了ORB-SLAM3在TUM-VI数据集上的yaml配置文件参数调优方法。针对双目惯性模式,详细拆解了相机标定、IMU噪声模型和ORB特征提取三大模块的关键参数,解释了其原理与影响,并通过实战案例展示了如何通过调整特征点数量、FAST阈值及IMU噪声参数,有效提升系统在低纹理环境下的鲁棒性和轨迹精度。

weixin_29071809的博客 154

Week 9 10 Neural Networks

Week 9 10 Neural Networks

金州饿霸吃不饱的博客 404

The function size must be used with a prefix when a default namespace is not specified

在jsp页面中不能通过${list.size}取列表长度,而是 &lt;%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions"%&gt; list的长度是:${fn:length(list)}

敲代码的乔帮主 1233

特殊通信领域场景应用:基于Simulink的数字预失真(DPD)算法仿真建模示例

增益压缩:高功率输入时输出信号的增益下降。相位失真:输入信号的相位随功率变化而改变。带外干扰:非线性失真会引入额外的频谱分量,影响邻道信号。多项式模型:用多项式拟合功率放大器的非线性特性。查找表(LUT):通过离线训练生成预失真映射表。自适应算法:实时调整预失真参数以动态补偿失真。发送端:生成随机比特流并调制为射频信号。预失真模块:对输入信号进行预失真处理。功率放大器模块:模拟非线性失真。接收端:解调信号并评估误码率(BER)。

xiaoheshang_123的博客 274

JSP页面获取 list 的长度

JSP页面获取 list 长度。 1.使用 EL 表达式:${list.size()} 来获取。发现不论是何种类型都可以获取到长度。 2.使用方法1,可能会存在获取不到的情况。(虽然我没有遇见,怎么测都没有测出来,但是朋友那里有这样的情况。然后在公司我也不能远程查看)。 引入 JSTL ...

1765

【AI智能体】全场景AI智能体工作台WorkBuddy实战操作详解

全场景AI智能体工作台WorkBuddy实战操作详解

congge 5569

# YOLOv11-seg改进系列 | 引入CVPR MetaFormer的C3k2_PoolingFormerCGLU模块,池化Token混合+CGLU门控MLP

本文引入 CVPR 2022 论文(MetaFormer/PoolFormer)提出的 MetaFormer 元架构设计,以Pooling Token 混合器 + ConvolutionalGLU(CGLU)MLP构成,将其封装为,用于替换 YOLOv11-seg 的 C3k2 块。对比维度C3k2(基线)C3k2_PoolingFormerCGLU(本文)参数量(n scale)2.46M≈2.49M9.6≈9.69.7(+1.0%)架构范式单阶段卷积MetaFormer 双阶段。

qq_44224801的博客 848

jsp中获取list的长度)——${fn:length(list) }

jsp中使用${list.size }会编译成list.getSize()方法,并不能获取list的长度,因为程序回去找List对象中的getSize()方法,所以只能想别的 办法,一种方法是在后台程序Action中声明一个变量存储list的长度,并对这个变量设置get set方法,但是这个方法有点麻烦,还多了一个变量, 另外一种方法可以使用jstl中的functions函数实现,具体步骤如下: 1.引入jstl和jstl函数包 <%@ taglib uri="http://java.sun.c

qq_45947664的博客 3283

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

jsp中获取list长度

<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%> <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions"%> list的长度是:${fn:length(list)} 转载于:https://www.cnbl...

weixin_30240349的博客 144

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

jsp页面获取后台传过来的list集合的长度

在jsp页面导入函数标签库 &lt;%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions"%&gt; list的长度是: ${fn:length(list)} 而不能使用 在jsp页面中不能通过${list.size}取列表长度。 转自:http://blog.youkuaiyun.com/qq44156826...

2134

怀旧版电脑GBC模拟器

再现原版GBC掌机的界面,电脑运行连游戏界面都一样大小,很怀旧,很真实,(英文版)强烈推荐,很小的文件,很难才找到的。

jsp中使用el表达式jstl函数解决不能使用${list.sise }获取List长度

今天遇到这个问题在网上找到答案,所以贴在自己的博客,避免以后不记得了  jsp中使用${list.size }会编译成list.getSize()方法,并不能获取list的长度,因为程序回去找List对象中的getSize()方法,所以只能想别的办法, 一种方法是在后台程序Action中声明一个变量存储list的长度,并对这个变量设置get set方法,但是这个方法有点麻烦,还多了一个变量,

innodyz的专栏 1571

JSP 获取List 的长度

导入包  --   <%@ taglib uri="http://java.sun.com/jsp/jstl/functions"prefix="fn"%>EL 获取 --   ${fn:length(list)} 转载于:https://www.cnblogs.com/tqspring/archive/2009/12/24/1631242.html...

weixin_30896825的博客 118

jsp页面获取list长度

[color=red][b]一丶缘由[/b][/color] 现在常用的页面获取值的方法有两种,一种是取后台保存至model中的值,一种是页面写自定义函数或标签,第一种方法可以在后台存的时候,取list的size,并保存至model中,虽然多加了代码,但也不算繁琐,但,第二种就比较难搞了,因为自定义函数返回的是一个list,那怎样获取它的长度呢? [color=red][b]二丶用法[/b][...

谪仙 404

JSP中JSTL获取list长度

Jsp中通过jstl中的fn函数获取list的长度,方式如下:   ${fn:length(list)}  返回的是list的size, 使用的时候需要include其tag,方式如下:   &lt;%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %&gt; &lt;%@ taglib prefix="fn"...

smallnetvisitor的博客 466

jsp页面中,el表达式获取list长度

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_34174322的博客 154

jsp获取list的长度

http://java.sun.com/jsp/jstl/core" prefix="c"%> http://java.sun.com/jsp/jstl/functions"%>

wen_t的博客 3466

【JSP EL】<c:if> <c:foreach >EL表达式 获取list长度/不用循环,EL在List中直接获取第一项的内容/EL获取Map的键,Map的值...

1.EL表达式 获取list长度 <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%> <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions"%> <c:if t...

weixin_34163741的博客 132
上一篇: 系统吞吐量
下一篇: Hibernate状态图
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值