subplot的用法
相关推荐
`全网最细!! 入门必看Git教程链接:https://gitee.com/all-about-git`
全网 Git 入门教程 gitee.com。如果显示The requested URL returned error: 403错误,那就表示没有和window本地建立token令牌
python中subplot的用法_[小白系列][可视化基础]多个子图(Axes), 使用 subplot() 快速绘制...
subplot使用subplot:matplotlib下, 一个 Figure 对象可以包含多个子图(Axes), 可以使用 subplot() 快速绘制subplot(numRows, numCols, plotNum)图表的整个绘图区域被分成 :numRows 行和 numCols 列plotNum 参数指定创建的 Axes 对象所在的区域然后按照从左到右,从上到下的顺序对每个子区域进行编号,...
Nginx配置Cookie安全属性:HttpOnly、Secure、SameSite实战指南
Cookie是Web应用中维持用户状态的核心机制,其安全配置直接关系到会话管理与身份认证的可靠性。从原理上讲,HttpOnly属性可防止XSS攻击窃取Cookie,Secure属性确保Cookie仅在HTTPS加密连接中传输,而SameSite属性则用于控制跨站请求时Cookie的发送行为,能有效防御CSRF攻击。这些安全属性的技术价值在于构建纵深防御体系,提升应用的整体安全性。在现代浏览器(如Chrome 80+)默认将未明确声明的Cookie视为SameSite=Lax的背景下,正确配置这些属性变得尤为
matplotlib之subplot()详解
plt.subplot()函数是我们平时绘图的时候最常用的一个函数之一,
CAT24C16 EEPROM的I²C页写与页读底层实现
I²C是一种广泛应用于嵌入式系统的双线同步串行通信协议,其核心在于严格的时序控制、地址寻址机制与主从应答逻辑。理解I²C总线物理层(上拉电阻、SCL/SDA电气特性)、协议层(START/STOP、ACK/NACK、7位地址格式)及外设寄存器操作(如SR1状态标志、CCR时钟分频),是实现可靠通信的基础。在实际工程中,EEPROM类器件(如CAT24C16)因其非易失性、页缓冲区结构和写保护(WP)功能,成为数据持久化关键载体;其16字节页写约束、内部写周期(5–10ms)与地址指针自动递增等特性,直接决定
BMS菊花链芯片怎么选?一张表对比ADI、TI、NXP五大厂家的隔离通信方案
本文深入对比了ADI、TI、NXP等五大厂商的BMS菊花链芯片隔离通信方案,涵盖技术演进、核心参数和场景化选型策略。通过实测数据和开发经验分享,帮助工程师在新能源汽车和储能系统中选择最优方案,提升通信可靠性和成本效益。
matplotlib---多图布局(subplot()函数、add_subplot()函数、axes()和add_axes()函数、subplots()函数)
此代码创建了一个包含4个子图的2行2列图形。plt.subplots(2,2)语句创建一个包含2行和2列的。为了在Matplotlib图形窗口中创建多个子图,可使用subplot()函数。该函数接受三个整数作为参。figure对象,并返回axes对象列表。然后在每个子图中绘制相应的函数,并给每个子图添加一个标。最后,将整个图形的标题和x轴标签添加到figure对象中。数,分别表示所需的行数、列数和子图位置。
ZYNQ PL通过EMIO ETHE1外接PHY由GMII转RGMII
1,设置EMIO方式引出ETHE1 2,从GMII过度到RGMII GMII: 发送 gmii_tx_clk gmii_tx_d[7:0] gmii_tx_en gmii_tx_er 接收 gmii_rx_clk gmii_rx_d[7:0] gmii_rx_dv gmii_rx_er RGMII: 发送 tx_clk tx_d[3:0] tx_ctrl 接收 rx_clk rx_d[3:0] rx_ctrl 首先数据总线从时钟单边沿采样8bit转变为了双边沿采样4bit,从88E1
Matplotlib subplot()函数用法详解
Matplotlib subplot()函数用法详解 在使用 Matplotlib 绘图时,我们大多数情况下,需要将一张画布划分为若干个子区域,之后,我们就可以在这些区域上绘制不用的图形。在本节,我们将学习如何在同一画布上绘制多个子图。 matplotlib.pyplot模块提供了一个 subplot() 函数,它可以均等地划分画布,该函数的参数格式如下: plt.subplot(nrows, ncols, index) nrows 与 ncols 表示要划分几行几列的子区域(nrows*nclos表示子
YOLOv11与CLIP融合的零样本目标检测技术:原理、实现与创新实践
YOLO(You Only Look Once)系列作为单阶段检测器的代表,以其实时高效的特性在工业界获得广泛应用。YOLOv11作为该系列的最新演进,引入了多项架构创新: C3K2模块:采用双小卷积核替代传统大卷积核,在保持感受野的同时减少计算量。当参数c3k=False时退化为YOLOv8的C2F模块,提供灵活的精度-效率权衡。 C2PSA(Convolutional block with Parallel Spatial Attention):通过并行空间注意力机制增强对微小目标的特征提取能力,这对
STM32CubeIDE下载程序报错:Failed to execute MI command: load G:\\Cube_IDE_EXP\\00_FIRST\\Debug\\00...如何解决??
🏆本文收录于 《全栈 Bug 调优(实战版)》 专栏。专栏聚焦真实项目中的各类疑难 Bug,从成因剖析 → 排查路径 → 解决方案 → 预防优化全链路拆解,形成一套可复用、可沉淀的实战知识体系。无论你是初入职场的开发者,还是负责复杂项目的资深工程师,都可以在这里构建一套属于自己的「问题诊断与性能调优」方法论,助你稳步进阶、放大技术价值 。
Matplotlib中subplot以及subplots的用法
概述 matplotlib能够绘制精美的图表,但我们希望把一组图表放在一起进行比较,这时我们就需要用到subplot。 用法 plt.subplot()返回一个Figure实例fig和一个AcesSubplot实例ax,flg代表整个图像,ax代表坐标轴和画的图。 flg, ax = plt.subplot(int ,int) 此时ax变成了ndarray。 参数 subplot(numRows, numCols, plotNum) 1.如果numRows = 2, numCols = 3, 那整个绘制图表
基于HetConv与Dual策略的YOLOv8轻量化设计-CSPHet结构的优化与实现
在计算机视觉中,YOLOv8作为目标检测领域的最新版本,通过引入多种改进来提升检测精度和速度。然而,提升精度和保持实时性能往往需要更多参数与计算量。本文提出一种结合Dual思想与HetConv的新型轻量化结构,称为CSPHet。CSPHet能够在保持YOLOv8检测精度的基础上有效减少约70万参数量,实现模型的轻量化和速度的提升。HetConv(Heterogeneous Convolution)是一种混合卷积技术,通过同时使用1x1、3x3等不同大小的卷积核,来捕捉不同尺度的特征。
matplotlib Figure和Subplot
import matplotlib.pyplot as plt import numpy as np import pandas as pd from datetime import datetime plt.plot(np.arange(10)) plt.show() ax_1 = plt.subplot(2, 2, 1) # 绘图板2行2列,选取第1个,先行再列这么数 a...
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
ET2012新版免狗免安装绿色软件
ET2012新版免狗免安祖昂绿色软件。,新界面,新视觉,
matplotlib中用 subplot2grid、add_subplot、subplot 函数在一张画布中绘制多个图形
matplotlib 中可以做多图合并的函数有 add_subplot 、 subplot 、subplot2grid ,前两个步骤有点繁琐,不如 subplot2grid 简单明了 函数用法及参数说明: subplot2grid(shape, loc, rowspan=1, colspan=1, fig=None, **kwargs) shape : 组合图框架形状,以元组形式传递,如2行3...
IEM模型,地表粗糙度模拟
利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟
matplotlib subplot 子图
通过GridSpec来定制Subplot的坐标 GridSpec指定子图所放置的几何网格。 SubplotSpec在GridSpec中指定子图(subplot)的位置。 subplot2grid类似于“pyplot.subplot”,但是它从0开始索引ax = plt.subplot2grid((2,2),(0, 0)) ax = plt.subplot(2,2,1)以上两行的子图(subpl
怀旧版电脑GBC模拟器
再现原版GBC掌机的界面,电脑运行连游戏界面都一样大小,很怀旧,很真实,(英文版)强烈推荐,很小的文件,很难才找到的。
subplot()函数--Matplotlib
划分画布的主要函数(第一部分)–subplot函数
matplotlib中subplot的用法
subplot概述 一个figure对象可以包含了多个子图,可以使用subplot()函数来绘制子图。 subplot(numRow , numCol ,plotNum ) subplot(numRow numCol plotNum) 可以不用逗号分开直接写在一起。 例子 import matplotlib.pyplot as plt names = ['group_a', 'group_b', ...
python中subplot_matplotlib 中的subplot的用法
一个figure对象包含了多个子图,可以使用subplot()函数来绘制子图:(首先我没有想明白为啥会有这么多的内容来介绍这一个函数,后来知道了原来这个函数还真的挺多的内容)言简意赅:首先,它的调用是这样子的:subplot(numbRow , numbCol ,plotNum ) or subplot(numbRow numbCol plotNum),对。看清楚,可以不用逗号分开直接写在一起也...
matplotlib —— subplot子图
创建subplot 1、使用add_subplot( )创建 In [121]: fig=plt.figure() In [122]: ax1=fig.add_subplot(2,2,1) In [123]: ax2=fig.add_subplot(2,2,2) In [124]: ax3=fig.add_subplot(2,2,3) In [125]: fig.show() ...
【python】matplotlib.subplot画图详解
首先一幅Matplotlib的图像组成部分介绍。 在matplotlib中,整个图像为一个Figure对象。在Figure对象中可以包含一个或者多个Axes对象。每个Axes(ax)对象都是一个拥有自己坐标系统的绘图区域。所属关系如下: 下面以一个直线图来详解图像内部各个组件内容: 其中:title为图像标题,Axis为坐标轴, Label为坐标轴标注,Tick为刻度线,Tick L...
python matplotlib中axes与subplot的区别是什么
1.axes subplot axis 先说第一个疑惑 Axes - Subplot - Axis 之间到底是个什么关系? 因为我是努力在看英文的教程,所以刚开始对axes和axis是基本搞不清的,一个是轴的复数,一个是轴,好像设定图像属性的时候经常用axes,具体到某个坐标轴的时候才会用axis。然后教程还说,subplot和axes基本就是一个意思。真是坑坑坑。。。 扛不住,翻了翻中文教程,好像有的教程就直接把axes翻译成子图了,好像这个世界就压根没有subplot和axes的区别。。看了半天,其实.
matplotlib中axes/subplot和axis的用法
饼状图 饼状图通过 matplotlib.pyplot.pie() 绘出。我们也可以进一步设置它的颜色、标签、阴影等各类样式。下面就绘出一个示例。 %matplotlib inline from matplotlib import pyplot as plt label = 'Cat', 'Dog', 'Cattle', 'Sheep', 'Horse' # 各类别标签 color = 'r', 'g', 'r', 'g', 'y' # 各类别颜色 size = [1, 2, 3, 4, 5] # 各
python中关于matplotlib库的figure,add_subplot,subplot,subplots函数
1.figure()相当于创建一个画布 函数定义 matplotlib.pyplot.figure(num=None, figsize=None, dpi=None, facecolor=None, edgecolor=None, frameon=True, FigureClass=<class ‘matplotlib.figure.Figure’>, clear=False, **k...
Matplotlib的subplot函数
figure Matplotlib的图像均位于figure对象中 创建figure:fig = plt.figure() 示例代码: # 引入matplotlib包 import matplotlib.pyplot as plt import numpy as np %matplotlib inline #在jupyter notebook 里需要使用这一句命令 # 创建figure对象 fig = plt.figure() 运行结果: <matplotlib.figure.Figure at 0x
【matplotlib】 图解pyplot figure、subplot、axes、axis的区别
图解matplotlib.pyplot figure、subplot、axes、axis的区别 基本概念 用matplotlib.pyplot绘图需要知道以下几个概念: 画图板/画布:这是一个基础载体,类似实际的画图板,用pyplot.figure()函数创建,程序中允许创建多个画图板,具体操作的画板遵循就近原则(操作是在最近一次调用的画图板上实现),缺省条件下内部默认调用pyplot.fi...
3749



被折叠的 条评论
为什么被折叠?



