LNK2019: unresolved external symbol __GSHandlerCheck

最新推荐文章于 2023-09-15 10:31:08 发布
最新推荐文章于 2023-09-15 10:31:08 发布
阅读量1.6k 收藏
点赞数
文章标签： security buffer 编程
本文介绍了解决VS2005环境下使用Native C++进行智能设备编程时出现的LNK2019未解析外部符号错误及警告LNK4099的问题方法。只需在工程设置中将缓冲区安全检查选项设为No(/gs)即可。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

对于在vs2005里用nativeC++做smartDevice编程的时候，编译程序会出现 

LNK2019: unresolved external symbol __GSHandlerCheck         这种连接错误或

"warning LNK 4099: PDB 'libbmt.pdb was not found"   这种报警。

其实只要在工程设置对话框里选择c/c++－－－buffer security check项选择no(/gs)即可

解决问题。

yang1994
关注
visual C++2015报错：error LNK2019: unresolved external symbol “public: __thiscall Json::Value::Value等
weixin_43803955的博客
08-12 1674
1>InfoAccessControl.obj : error LNK2019: unresolved external symbol "public: __thiscall Json::Value::Value(enum Json::ValueType)" (??0Value@Json@@QAE@W4ValueType@1@@Z) referenced in function "public: bool __thiscall AccessNode1::ReadJson(class std::basi
visual C++ 2015 报错error LNK2019: unresolved external symbol _mysql_num_rows@4 referenced in function
weixin_43803955的博客
08-18 480
visual C++ 2015 报错error LNK2019: unresolved external symbol _mysql_num_rows@4 referenced in function 如图所示： 1>SqlManager.obj : error LNK2019: unresolved external symbol _mysql_num_rows@4 referenced in function "public: bool __thiscall CSqlManager::GetRec
解决由VS2005 SP1带来的问题－在编译WM5程序时
The Way of Programming
01-24 1755
 升级到VS2005 SP1后，原本以前一切都很顺利的WM5工程带来了许多问题，针对WINCE 6 platform SP1升级了编译器与一些库信息。unresolved external symbol __GSHandlerCheck的错误。1.  大量的Warning消息－               warning LNK4099: PDB libbmt.pdb was not f
Windows Mobile 编译错误解析：LNK2019: unresolved external symbol __GSHandlerCheck
斯巴达的勇士已经是雅典的臣民了。。。
08-13 2469
一再看到有人在优快云论坛上面问， 我的PPC/SMARTPHONE的SDK example为什么编译不过，我没有做过任何的修改啊！然后出现的错误都是类似的 LNK2019: unresolved external symbol __GSHandlerCheck 的错误，然后出了错误， 大抵都失去了对Microsoft的信任：）那问题的缘由处在什么地方呢？其实在MSDN Blog上面有对于类似问题
error LNK2001: 无法解析的外部符号 __GSHandlerCheck
吴遥的专栏
01-09 1925
<!--function StorePage(){d=document;t=d.selection?(d.selection.type!=None?d.selection.createRange().text:):(d.getSelection?d.getSelection():);void(keyit=window.open(http://www.365key.com/st
VS2005编译WM5时出现__GSHandlerCheck链接错误
traum的专栏
08-05 803
  在Visual Studio 2005开发环境中，编译链接进遇到如下错误： error LNK2001: 无法解析的外部符号 __GSHandlerCheck。这应该是链接器在链接过程找不到标识（升级到VS2005 SP1后，原本以前一切都很顺利的WM5工程带来了许多问题，针对WINCE 6 platform SP1升级了编译器与一些库信息。）1，在网上找到一篇文章说，修改“项目属
解决error LNK2001: unresolved external symbol
07-25
解决 error LNK2001: unresolved external symbol 在编译VC项目时，经常会遇到error LNK2001: unresolved external symbol的错误，这个错误是由于缺少某些库文件而引起的。在这里，我们总结了三种常见的情形，并...
提示出现unresolved external symbol _main的解决方法
01-01
提示出现unresolved external symbol _main搜了下找了下原因如下在创建MFC项目时, 不使用MFC AppWizard向导, 如果没有设置好项目参数, 就会在编译时产生很多连接错误, 如error LNK2001错误, 典型的错误...
关于VC6.0中 运行错误 unresolved external symbol _WinMain@16的解决
05-31
解决 VC6.0 中运行错误 unresolved external symbol _WinMain@16 在使用 VC6.0 进行编程时，可能会遇到一个常见的错误：unresolved external symbol _WinMain@16。这是一个链接错误，出现这种错误的原因是因为 VC...
JLink_Windows_V648.zip
07-29
Version V6.48 (2019-07-26) Added flash programming support for AmbiqMicro's AMA2B1KK (Apollo2 Blue; AMA2BEVB). Added flash programming support for AmbiqMicro's AMA2B1KK (Apollo2 Blue; AMA2BEVB). Added unlocking support for Microchip SAML10 series devices. Added unlocking support for Microchip SAML10 series devices. Analog Devices ADUCM355: Reset could not be overwritten using a J-Link script file. Fixed. CCS plugin: Added a new option which allows configuring a J-Link script file (project dependent). Commander: "erase" did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. Commander: "erase" did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. DLL Updater (internal): Added Infineons Micro Inspector. DLL Updater (internal): Added Infineons Micro Inspector. DLL: STM32WB55 added support for Co-Processor Wireless stack upgrade. DLL: Added Flash programming support for CYT2B9 series devices. DLL: Added Flash programming support for CYT2B9 series devices. DLL: Added Flash programming support for Cypress Traveo2 CYT2B and CYT4B series devices. DLL: Added Flash programming support for Cypress Traveo2 CYT2B and CYT4B series devices. DLL: Added OTP flash programming support for TI's RM42L device family. DLL: Added OTP flash programming support for TI's RM44L device family. DLL: Added OTP flash programming support for TI's RM46L device family. DLL: Added OTP flash programming support for TI's RM48L device family. DLL: Added flash programming support for Panasonic MN1M7BFxx and MN1M7AFxx series devices. DLL: Added flash programming support for Panasonic MN1M7BFxx and MN1M7AFxx series devices. DLL: Added flash programming support for ST STM32G47xx series devices. DLL: Added flash programming support for ST STM32G4xx series devices. DLL: Added flash programming support for ST STM32G4xx series devices. DLL: Added flash programming support for STM32H745, STM32H755, STM32H747 and STM32H757 series devices. DLL: Added flash programming support for STM32H745, STM32H755, STM32H747 and STM32H757 series devices. DLL: Added flash programming support for WIZnet W7500 series device. DLL: Added flash programming support for WIZnet W7500 series device. DLL: Added native trace buffer support for Renesas RZ/A2M series. DLL: Added support for Cypress CYT2B series devices Cortex-M4. DLL: Added support for Cypress CYT4B series devices Cortex-M7_0 and Cortex-M7_1. DLL: Added support for Cypress MB9DF / MB9EF series (FCR4) devices. DLL: Added support for RISC-V behind a DAP as setup. DLL: Added support for RISC-V via SWD for RISC-V behind a DAP setups. DLL: Added support for SPI FLash Adesto ATXP128/ATXP128R to SPIFI-Lib for indirect flash programming. DLL: Added support for SPI FLash Adesto ATXP128/ATXP128R to SPIFI-Lib for indirect flash programming. DLL: Added support for command string "CORESIGHT_SetCoreBaseAddr" DLL: Cypress PSoC4 family: Under special circumstances, unlock did not work. Fixed. DLL: Cypress PSoC4 family: Under special circumstances, unlock did not work. Fixed. DLL: Flash programming sector sizes corrected for Traveo2 CYT4B series devices. DLL: Flash programming sector sizes corrected for Traveo2 CYT4B series devices. DLL: For the MPC560xx devices, the ECC SRAM was not initialized after connect. Fixed. DLL: Hilscher NetX90 flash bank size, fixed. DLL: Infineon TLE98xx: Some J-Link LITEs could not connect establish a successful target connection due to missing firmware functionality. Fixed. DLL: JTAG: When only having 1 TAP in the JTAG chain and its matches the one for the configured CPU core but the TAP-ID was unknown, connect did not work. Fixed. DLL: Linux: Delayed / slowed execution of certain API functions when using J-Link via USB (e.g. on Close()). Introduced in V6.46. Fixed. DLL: Linux: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the JLinkDevices.xml file was not found. Fixed. DLL: Linux: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the libjlink* shared library was not found. Fixed. DLL: Microchip J-32 OEM probes could not support legacy Atmel devices. Fixed. DLL: Minor bug in flash programming algorithm for STM32G0xx series devices, fixed. DLL: NXP KW34: Added flash programming support for the program and data flash area. DLL: NXP KW34: Added flash programming support for the program and data flash area. DLL: NXP KW35 / KW36 / KW38 / KW39: Added flash programming support for the data flash area. DLL: NXP KW35 / KW36 / KW38 / KW39: Added flash programming support for the data flash area. DLL: NXP KW38: Corrected device names showen in the device selection dialog. DLL: NXP KW38: Corrected device names showen in the device selection dialog. DLL: NXP KW3x family: Improved flash programming speed significantly. DLL: NXP KW3x family: Improved flash programming speed significantly. DLL: NXP LPC18xx / LPC43xx: After QSPI flash programming, the QSPI flash memory was no longer memory mapped accessible. Introduced in V6.41. Fixed. DLL: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. DLL: Programming issue while another application is already running on Hilscher NetX90, fixed. DLL: QSPI flash programming: When the QE bit was set before flash programming, it has been cleared but not restored by the DLL. Introduced in V6.46h. Fixed. DLL: Qorvo GP570 / UE878 / QPG6 family: Flash programming did not work in recent silicon revisions. Fixed. DLL: Qorvo GPxxx: Under special circumstances, flash programming did not work. Fixed. DLL: RAM size of ST STM32F412 series devices, fixed. DLL: RISC-V behind a DAP: Setting system variables , , from J-Link script files did not have any effect for RISC-V behind a DAP. Fixed. DLL: RISC-V behind a DAP: Setting system variables , , from J-Link script files did not have any effect for RISC-V behind a DAP. Fixed. DLL: RISC-V: Added reset type "Reset Pin" to explicitly allow resetting the target via the reset pin, instead of the bit DLL: RISC-V: Changed default reset type from reset pin to to support reset on almost all systems, also ones that do not populate a reset pin DLL: RISC-V: Interrupts were not disabled correctly during flash programming for built-in flash algos (works well for open flash loaders). Fixed. DLL: RISC-V: Reset could fail with "core did not halt after reset" even if the core halted correctly. Fixed. DLL: Re-attaching to existing debug session after connecting and disconnecting once via TELNET (e.g. used by RTTClient and RTTViewer) did not work properly. Fixed. DLL: Renesas R5F51306 (RX130) devices were not detected by the J-Link DLL. Fixed. DLL: Renesas RX231: OFS1 could not be modified. Fixed. DLL: Renesas RX: Added support for RX66N series devices DLL: Renesas RX: Added support for RX72M series devices DLL: Renesas RX: Added support for RX72M series devices DLL: Renesas RX: Added support for RX72N series devices DLL: Renesas RX: Added support for RX72T series devices DLL: Renesas RX: Added support for RX72T series devices DLL: Renesas RX: RX66T: Programming of option-setting memory (OSIS) did not work properly. Fixed. DLL: Renesas RX: When connecting to locked RX devices via JTAG (does not affect FINE!), 16-byte IDCODE (OSIS) could be rejected even though the correct code was given. Fixed. DLL: Renesas S7G2: QSPI flash programming did not work for QSPI flashes >= 16MB. Fixed. DLL: Resets during halt of TI RM57L843ZWT device, due to running watchdog, fixed. Enabled cross trigger interfaces to forward debug acknowledge signal to Watchdog. DLL: SPI-Flash programming for Spansion S25FL256L, fixed. DLL: STM32L031K6 secure chip did not work. Fixed. DLL: STM32WB55 added support for Co-Processor Wireless stack upgrade. DLL: TI RM42L420 added EEPROM support. DLL: TI RM44L520/RM44L920 added flash and EEPROM support DLL: TI RM57L843ZWT added EEPROM support. DLL: TI RM57L843ZWT added EEPROM support. DLL: Under some circumstances Flash Cache was not cleaned after erase operations. DLL: Unsecure read protection for STM32L151xx series devices, fixed. DLL: Unsecure write protection for STM32L151xxx series devices, fixed. DLL: When using J-Trace PRO with IAR EWARM a "failed to allocate x bytes of memory" error could occur. Fixed. DLL: Windows: Renesas RX: When using FINE interface and disabling ongoining debug mode on debug session close, it could happen that a thread was not exited gracefully, causing handle leaks. Fixed. DLL: macOS: When calling a J-Link application via the global symlink (e.g. "JLinkExe" instead of "./JLinkExe"), sometimes the libjlink* shared library was not found. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Chip erase could fail in stand-alone mode. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Parallel CFI NOR Flash memory programming could fail under special circumstances. Fixed. Firmware: Flasher ARM / PRO / Portable PLUS: Stand-alone mode did not work for some devices from Analog Devices (e.g. ADuCM7023). Fixed. Firmware: Flasher ARM / PRO: FWrite command was unable to receive 512 bytes via UART at once. Fixed. Firmware: Flasher ARM V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: Flasher ARM/PPC/RX/PRO: Target power supply monitoring could erroneously detect an over-current. Fixed. Firmware: Flasher PRO: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. Firmware: Flasher PRO: Universal Flash Loader mode detection in batch mode did not work. Fixed. Firmware: Flasher PRO: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: Flasher Portable PLUS did not show the correct status under special circumstances. Fixed. Firmware: Flasher Portable PLUS did not work in J-Link Mode while showing "OK" message. Fixed. Firmware: Flasher Portable PLUS: Universal Flash Loader mode detection in batch mode did not work. Fixed. Firmware: Flasher Portable PLUS: Number of bytes to program was not calculate correctly, progress bar showed wrong percentage. Fixed. Firmware: Flasher Portable PLUS: Open flash loaders for RISC-V did not work properly anymore (introduced with V6.46). Fixed. Firmware: Flasher Portable PLUS: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link EDU Mini: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link EDU Mini: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: Added support for RISC-V behind a DAP as setup. Firmware: J-Link EDU/BASE/PLUS V10: Increased heap size of firmware (Added support for heap over multiple memory ranges with gaps between them) Firmware: J-Link EDU/BASE/PLUS V10: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link EDU/BASE/PLUS V10: SWO: Under very special circumstances it could happen that the 1st byte received on SWO was swallowed. Only happened, if SWO pin was used for something else between SWO_Stop() and SWO_Start(). Fixed. Firmware: J-Link EDU/BASE/PLUS V10: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link OB-K22-SiFive: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link PRO V4: Added support for RISC-V behind a DAP as setup. Firmware: J-Link PRO V4: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link PRO V4: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link PRO V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link PRO V4: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Link ULTRA+ V4: Added support for RISC-V behind a DAP as setup. Firmware: J-Link ULTRA+ V4: RISC-V: On implementations that do not populate a "program buffer" CSRs could not be accessed correctly, resulting in non-functional debug sessions. Fixed. Firmware: J-Link ULTRA+ V4: RISC-V: Reset on SiFive FE310 device (mounted on HiFive1 boards) could fail with timeout error. Fixed. Firmware: J-Link ULTRA+ V4: Warning "J-Link low on memory" could occur after using SPI functionality of J-Link. Fixed. Firmware: J-Link ULTRA+ V4: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Link-OB-K22-SiFive: Linux: When using both VCOM ports extensively under special circumstances it could happen that the USB communication locked up. Fixed. Firmware: J-Trace PRO V1 Cortex-M: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Trace PRO V2 Cortex-M: Corrected typo on th webserver trace configuration page. Firmware: J-Trace PRO V2 Cortex-M: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Firmware: J-Trace PRO V2 Cortex: Corrected typo on th webserver trace configuration page. Firmware: J-Trace PRO V2 Cortex: When connecting via IP and using RTT it could happen that J-Link FW crashed and rebooted if the PC did not exit the controlling process in a clean way. Fixed. Flasher ARM / PRO / Portable PLUS: Init/Exit step BNE and BEQ could jump to #step + 1. Fixed. Flasher ARM / PRO / Portable PLUS: Open Flashloader RAMCodes in stand-alone-mode can be >12kB now. Flasher ARM / PRO / Portable PLUS: Stand-alone mode did not work for some ARM devices. Introduced in V6.47b. Fixed. Flasher ARM / PRO: Reading or writing memory in J-Link mode via JTAG caused the firmware to hang and report a USB timeout. Fixed. Flasher: Added stand-alone mode support for Traveo2 CYT2B and CYT4B devices. Flasher: Added stand-alone mode support for Traveo2 CYT2B and CYT4B devices. GDBServer: Under special circumstances, a remote "g" packet error popped up when using the GDBServer with Cortex-AR or MIPS. Fixed. GUI applications (Linux): The directory the application was executed from affected the behavior of the application. Fixed. J-Flash Lite: Updated to select the flash base address of the selected device by default as "Prog. Addr." instead of always 0x00000000. J-Flash Lite: Updated to select the flash base address of the selected device by default as "Prog. Addr." instead of always 0x00000000. J-Flash SPI: Added flash programming support for ISSI IS25LP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25LP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP016D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP080D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP128D SPI Flash. J-Flash SPI: Added flash programming support for ISSI IS25WP128D SPI Flash. J-Flash SPI: Licenses that have been burned into J-Link via J-Link Commander "license add" command were not detected properly. Fixed. J-Flash: Generated data files could be unnecessarily big. Fixed. J-Flash: Generated data files could be unnecessarily big. Fixed. J-Flash: Improved error messages during the check, if the data fits into the flash memory. J-Flash: Improved error messages during the check, if the data fits into the flash memory. J-Flash: Licenses that have been burned into J-Link via J-Link Commander "license add" command were not detected properly. Fixed. J-Link BASE/EDU/PLUS: SPI flash programming with J-Flash SPI was very slow. Fixed. J-Link Commander: RISC-V: Added to the list of suggested/available interfaces JFlash: Added command line parameter "?" (Same functionality as "-?"). JFlash: Added command line parameter "?" (Same functionality as "-?"). JFlashSPI: Added SPI flash programming support for ISSI IS25LP016D SPI flash. JFlashSPI: Added SPI flash programming support for ISSI IS25LP016D SPI flash. JFlashSPI_CL: Added command line parameter "?" (Same functionality as "-?"). JFlashSPI_CL: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTClient: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTClient: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTLogger: Added command line parameter "?" (Same functionality as "-?"). JLinkRTTLogger: Added command line parameter "?" (Same functionality as "-?"). JLinkSTR91x: Added command line parameter "?" (Same functionality as "-?") and implemented "help" functionality which returns the available command line parameters. JLinkSTR91x: Added command line parameter "?" (Same functionality as "-?") and implemented "help" functionality which returns the available command line parameters. JTAGLoad: Added command line parameters "?" and "-?" (Same functionality as "/?"). JTAGLoad: Added command line parameters "?" and "-?" (Same functionality as "/?"). PCodes: Changed an ambiguous J-Link report output. PCodes: Resolved an issue where some Cypress PSoC4 devices would not unlock automatically when connecting to them. Fixed. Package: USB driver for VCOM: Under very special circumstances bluescreens could occur when using VCOM. Fixed. (Driver update only applies to Windows Vista and later. Windows XP still uses the old driver as the new one is not compatible to Windows XP anymore) RTTClient: Connecting to existing session did not work correctly on MacOS. Fixed. RTTClient: Linux: Ubuntu: Attaching to existing debug session did not work properly. Fixed. RTTLogger (Linux): Using logrotate lead to null characters being printed before RTT data. Fixed., RTTViewer: Added 'All terminals' message in case of connection loss. RTTViewer: Added information display on how to correctly enter RTT control block search range. RTTViewer: Echo to Terminal 0 / 'All terminals' was not working correctly. Fixed. RTTViewer: Fixed 'Attach to existing session' mode for Windows, MacOS and Linux. RTTViewer: Fixed typo. RTTViewer: Improved J-Link connect/ disconnect sequence. RTTViewer: Improved handling for data logging. RTTViewer: Improved handling for terminal logging. RTTViewer: Improved log messages when connecting to J-Link. RTTViewer: Improved log output. RTTViewer: Improved reconnecting for attach mode. RTTViewer: Improved the handling in case reading of RTT data failed. RTTViewer: In some occasions, the CL option '--autoconnect' did not work. Fixed. RTTViewer: In some rare occasions, clearing a terminal could crash the application. Fixed. RTTViewer: Linux: Ubuntu: Option "Attaching to existing debug session" did not work properly. Fixed. RTTViewer: Some ANSI CSI sequences caused the application to crash. Fixed. RTTViewer: The '--autoconnect' CL option caused the application to crash. Fixed. RemoteServer: Command line options '-select USB=' and '-SelectEmuBySN ' did not work correctly. Fixed. SDK (Windows): Linking against the *.lib files with MinGW did throw errors reg. undefined references to "__security_check_cookie" and "__GSHandlerCheck". Fixed. SDK: JLINKARM_EraseChip() did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. SDK: JLINKARM_EraseChip() did not use the EraseChip command to erase the entire flash but the EraseSector command. Changed. Trace: Under certain circumstances backtrace was not showing for targets with PTM. Fixed. UM08002: Chapter "Python support" added. UM08002: Chapter "Python support" updated. Section "API Functions": Added "FlashDownload" description
LNK2001 __GSHandlerCheck【error】
最新发布
dev低调者-专注优质编程、分享不一样的历程
09-15 335
VS链接错误error LNK2001 __GSHandlerCheck 检查工具集是否一致或者兼容。
__GSHandlerCheck链接错误
Dlanguage的专栏
06-02 2045
If youre a native C++ smart device developer and recentlydownloaded VS2005 SP1 you may find that some of your existing programsand some of the samples that ship with Windows Mobile SDK will fail toco
setupdll工程的 unresolved external symbol GSHandlerCheck错误
sc116116111的专栏
04-21 694
wince的setupdll工程中,调用CreateToolhelp32Snapshot引用问题,少了libcmt.lib,该lib加到proprerics->link-->input,不要#pragma comment方式引用
Error LNK2019:Unresolved External Symbol 的解决方案
weixin_34306676的博客
12-21 365
　　当头文件中声明了一个函数，但是在相应的源文件中却没有对该函数进行定义，则会出现为“解决的外部符号”（unresolved external symbol ）错误。另外，当一个函数调用了外部的一个库文件中的函数，但是在当前project的properties中并没有将所依赖的（dependent）库文件包含进来时，也会出现这种错误。 综上，当一个solution在linking时找...
转载：error LNK2019: unresolved external symbol __GSHandlerCheck referenced in function
快慢机的地盘
01-15 3052
转载 ："error LNK2019: unresolved external symbol __GSHandlerCheck referenced in function "int __cdecl InitInstance(struct HINSTANCE__ *,int)" (?InitInstance@@YAHPAUHINSTANCE__@@H@Z) 工程属性linker->input->I
error lnk2001: unresolved external symbol _getpriority
07-18
### 回答1： error lnk2001: unresolved external symbol _getpriority 是一个与函数 getpriority 相关的链接错误。该错误表示在链接器阶段无法找到 getpriority 函数的定义。 getpriority 函数是用于获取进程或进程组的优先级的一个标准函数，该函数声明在头文件 #include <sys/resource.h> 中。然而，由于某些原因，链接器无法找到该函数的定义，导致出现 unresolved external symbol 错误。 要解决此问题，可以按照以下步骤操作： 1. 确保在源代码中正确地包含了 <sys/resource.h> 头文件。在 C/C++ 源文件的开头添加 #include <sys/resource.h>，以确保查找到正确的函数声明。 2. 检查编译器选项是否正确设置。有时，编译器选项可能需要手动指定以链接相应的库。对于 getpriority 函数，可能需要链接 librt 或 libpthread 库。可以尝试添加 -lrt 或 -lpthread 到编译器的选项中。 3. 确保链接器能够找到 getpriority 函数的实现。实现该函数的库文件应该与编译器链接，以便在链接器阶段解决外部符号引用。这通常涉及到正确设置库文件的路径或将库文件添加到链接器的库路径中。 总结：error lnk2001: unresolved external symbol _getpriority 是一个链接错误，表示编译器无法找到 getpriority 函数的定义。要解决此问题，需要确保正确包含头文件、正确设置编译器选项和链接库文件。 ### 回答2： error lnk2001: unresolved external symbol _getpriority是一个链接错误，意味着链接器无法解析对_getpriority的外部符号引用。 _getpriority是一个用于获取进程优先级的函数，它在Windows下没有定义，因此链接器无法找到它的定义。 要解决这个问题，可以采取以下几种方法： 1. 检查代码中是否有对_getpriority函数的调用：首先检查代码中是否存在对_getpriority函数的调用，如果没有必要使用该函数，可以删除相关的代码，这样可以避免链接错误。 2. 更改代码以使用Windows下的类似功能：如果确实需要使用进程优先级相关的功能，可以改用Windows下的类似函数来代替_getpriority。可以使用Windows API中的GetPriorityClass函数来获取进程优先级，该函数返回一个整数值表示进程的优先级类别。 3. 添加相应的库文件：如果你确定代码中需要使用_getpriority函数，可以找到包含该函数定义的库文件，并将其添加到链接器的库文件路径中。可以通过在项目属性中添加相应的附加库路径和库文件名称来实现。 总之，要解决error lnk2001: unresolved external symbol _getpriority链接错误，可以通过删除对_getpriority函数的调用、使用Windows API中的相关函数或添加相应的库文件来解决问题。 ### 回答3： 这个错误是由于在C++代码中使用了一个未解析的外部符号"getpriority"所引起的。"getpriority"是一个用于获取进程优先级的函数，属于POSIX标准库中的一部分。 在C++中，要使用"getpriority"函数，需要包含对应的头文件<sys/resource.h>，并且需要链接实现该函数的库文件。根据错误提示"error lnk2001: unresolved external symbol _getpriority"，可以推断出缺少对应的库文件的链接。 解决这个问题可以按照以下步骤进行： 1. 确保正确地包含了头文件<sys/resource.h>： #include <sys/resource.h> 2. 确认编译器的选项是否正确地链接了对应的库文件。 对于使用GCC编译器的情况，需要添加"-l"参数指定链接的库文件名，例如： g++ main.cpp -o main -l库文件名 3. 如果是在Windows平台上开发，可能需要使用Cygwin或MinGW等工具链来编译和链接，以确保POSIX相关的功能可用。 此外，请注意确保包含正确的库文件，并将其放置在正确的位置，以便编译器能够找到并链接到正确的实现。 总之，"error lnk2001: unresolved external symbol _getpriority"错误是由于未能解析所需库文件中的"getpriority"函数引起的。通过检查头文件和链接选项，以及在合适的位置放置正确的库文件，可以解决这个问题。
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值