NYIST 708 ones

本文介绍了一种算法,用于解决给定正整数N时,如何使用仅包含1、加号、乘号、括号的数学表达式来表示该数字,并确保1不会连续出现。算法通过动态规划的方法寻找构成特定数值所需的最小数量的1。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

ones

时间限制:1000 ms  |  内存限制:65535 KB
难度:3
描述
Given a positive integer N (0<=N<=10000), you are to find an expression equals to N using only 1,+,*,(,). 1 should not appear continuously, i.e. 11+1 is not allowed.
输入
There are multiple test cases. Each case contains only one line containing a integer N
输出
For each case, output the minimal number of 1s you need to get N.
样例输入
2
10
样例输出
2
7

#include <stdio.h>
//a[n]表示要生成n,最少需要的1的个数
//a[n]=min(a[k]+a[n-k], a[t]+a[n/t])
//其中,t为n的因子
int a[10001];

int main()
{
    int n;
    a[1]=1;
    for(int i=2; i<=10000; i++)
    {
        int b=1, e=i-1, min=100000;
        while(b<=e)
        {
            int t=a[b++]+a[e--];
            if(t<min)min=t;
        }
        b=2, e=i/2;
        while(b<=e)
        {
            if(i%b==0)
            {
                e=i/b;
                int t=a[b]+a[e];
                if(t<min)min=t;
            }
            ++b, --e;
        }
        a[i]=min;
    }
    while(scanf("%d", &n)==1)
        printf("%d\n", a[n]);
    return 0;
}


以下是51单片机控制的12864液晶显示系统编程实现所需的代码: ``` #include <reg51.h> #include <intrins.h> #define LCD_DB P0 sbit LCD_RS = P2^6; // RS信号 sbit LCD_RW = P2^5; // RW信号 sbit LCD_E = P2^7; // E信号 sbit LCD_CS1 = P2^0; // CS1信号 sbit LCD_CS2 = P2^1; // CS2信号 void delay(unsigned int i) // 延时函数 { while(i--); } void write_com(unsigned char com) // 写命令函数 { LCD_RS = 0; LCD_RW = 0; LCD_DB = com; LCD_E = 1; _nop_(); _nop_(); LCD_E = 0; } void write_data(unsigned char dat) // 写数据函数 { LCD_RS = 1; LCD_RW = 0; LCD_DB = dat; LCD_E = 1; _nop_(); _nop_(); LCD_E = 0; } void init_lcd() // 初始化函数 { write_com(0xc0); // 设置显示模式 write_com(0x3f); // 允许显示 write_com(0x40); // 设置起始地址 write_com(0xb8); // 设置页地址 write_com(0xc0); // 设置列地址 write_com(0x40); // 设置起始地址 write_com(0xb8); // 设置页地址 write_com(0xc0); // 设置列地址 } void display_string(unsigned char x, unsigned char y, unsigned char *s) // 显示字符串函数 { unsigned char i; if(y == 0) // 第一行居中显示“南阳理工学院” { write_com(0xb8 + x); write_com(0x40); } else if(y == 1) // 第二行居中显示“www.nyist.edu.cn” { write_com(0xb8 + x); write_com(0x48); } else if(y == 2) // 第三行居中显示“电子信息工程专业” { write_com(0xb8 + x); write_com(0x50); } else if(y == 3) // 第四行居中显示尚春芳 { write_com(0xb8 + x); write_com(0x58); } for(i = 0; s[i] != '\0'; i++) { write_data(s[i]); } } void main() { init_lcd(); // 初始化LCD display_string(18, 0, "南阳理工学院"); // 显示第一行 display_string(16, 1, "www.nyist.edu.cn"); // 显示第二行 display_string(16, 2, "电子信息工程专业"); // 显示第三行 display_string(22, 3, "尚春芳"); // 显示第四行 while(1); } ``` 以上代码实现了你提出的要求,第一行居中显示“南阳理工学院”,第二行居中显示“www.nyist.edu.cn”,第三行居中显示“电子信息工程专业”,第四行居中显示尚春芳。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值