AGRI10051 PRACTICAL 1: Chromosomes Cell Replication and DNA 2024 Prac 1C/C++

C++笔记之初始化一个对象、实例化一个对象,官方说法辨析 这两件事发生在不同层面:一个在编译期生成类型,一个在运行期(或常量求值期)构造对象。C++ 没有对应机制。在 Java 里,类加载后有"类初始化",即执行。这些都是对象或变量的初始化,不是类本身的初始化。 阅读详情

Java Python AGRI10051 2024 Prac 1

PRACTICAL INFORMATION AND APPENDICES

Welcome to the Biology Laboratory! This first page contains important information that will help you during your practical classes, so you may wish to read through it carefully so that you are familiar with how the practicals run.

LOCATION, ATTENDANCE etc.

Both practical sessions across all 4 weeks are held in Level 2 (Rm 210) of the Redmond Barry Building. Please ensure that you attend your registered class as per your timetable. Attendance will be taken at each class.

Please be punctual (or even early) and come with the appropriate safety equipment/PPE.

If you are more than 15 minutes late you would have missed the safety information and start of the practical activities so will NOT be allowed to enter the practical. If this happens and you have a valid reason for being late or absent, you should email subject staff for further information.

ASSESSMENT

In this subject, there are 3 assessed practical classes (Week 1 practical is not assessed but serves as great practice). Each practical assessment is worth 7.5% of the overall subject mark. Passing the practicals is the first hurdle requirement for this subject: a mark of at least 50% in the combined in-semester assessments (Weeks 4, 5, 7 pracs run by BioSciences, and a workshop assignment run by SAFES).

Each practical assessment consists of two parts: a pre-prac quiz based on the preparation material and your prior knowledge (worth 1.5%), and a post-prac test which draws on all the completed practical activities (worth 6%). You may use your notes during the assessment (i.e., these are open-book assessments), but you must complete this on your own.

BEFORE EACH PRAC

•    Download and read the prac notes thoroughly. Pracs can be quite busy, and you will struggle if you are not prepared.

•   Watch the  TechTip videos as instructed on the preparation page for each Practical.  Information covered in these videos will not be repeated in class, as it is assumed that you have completed all preparation and therefore have knowledge of these techniques already.

•   Complete any other activities listed on the Practical Preparation page.

•   Complete the pre-prac test before your scheduled prac day (except for Week 3).

PRACTICAL 1: Chromosomes, Cell Replication and DNA

In this prac, we will:

•    Become familiar with basic microscope techniques

•   Visualise chromosomes in plant cells to understand mitosis

•    Extract DNA from strawberries

•   Set-up bacterial plates for the auxotroph experiments which you will characterise next prac

BEFORE THE PRAC

•    Download and read these prac notes, including the appendices

•    If you haven’t completed AGRI10050 last semester, watch the following videos on Canvas:

o Using a compound microscope

o Using a dissecting microscope

•   Watch the following videos on Canvas:

o TechTip: Spreading an agar plate

o TechTip: Setting up the Auxotroph experiment

ASSESSMENT

•    None for the first prac – a practice post-prac quiz will become available at the end of prac to get you used to the process, and to help you consolidate your knowledge.

IN THE PRAC

Time (approx.)

Activity

25 mins

Welcome & introduction to Practical 1

10 mins

Activity 1: Using a microscope

Practical Task 1.1: Familiarise yourself with the use of a microscope

 

30 mins

Activity 2: Visualising chromosomes, part 1

Practical Task 2.1: Garlic root-tip staining Practical Task 2.2: Mitotic Index

20 mins

Activity 3: DNA extraction

Practical Task 3.1: Extracting DNA from strawberries

20 mins

Activity 4: Characterising auxotrophs

Practical Task 4.1: Experimental set-up

Your safety in the laboratory is very important:

•   At all times wear a lab coat, suitable shoes with enclosed heel and toe and safety glasses.

•   Always work to ensure your safety and the safety of those around you.

•    Immediately report any injuries or spills to a demonstrator.

•    Microorganisms will be used in this class, avoid touching things to your mouth and wash hands carefully after the class.

A risk assessment has been carried out for the practical classes and identified risks minimised.

ACTIVITY 1: USING A MICROSCOPE                                                                                      10 MINS

Practical Task 1.1: Familiarise yourself with the use of a microscope

The light microscopes in this lab can magnify images up to 400x. This is large enough to view most cells in good detail. During your practicals, you will use 2 different microscopes – a compound microscope and a dissecting microscope.

(A)     Read Appendix 1 (pp. 11-12) and familiarise yourself with the compound microscope. 

(B)     Read Appendix 2 (pp. 13) and familiarise yourself with the dissecting microscope.

(C)     Read Appendix 3 (pp. 14) and learn how to estimate size with both microscope types.

Prior to attending Practical 1

If you did not complete AGRI10050 last semester (or would like to revise), you will need to watch the two videos below BEFORE attending the first practical class. It will be assumed that you have completed this preparation or are already familiar with the basic features of microscopes and how to use them.

(A)     On Canvas, watch the short video about how to set up the compound microscope.

(B)     On Canvas, watch the short video about how to set up the dissecting microscope.

During Practical 1

We will only be using the compound microscope for today’s practical activities. Spend a few minutes looking at the compound microscope on your bench. Practice adjusting the magnification and focus using the provided newsprint.

Q1.1a. Take note of the information in the appendices about microscopes – what are some of the main components/features of these microscopes?

Q1.1b. Recognise that the two different types of microscope are used to examine different samples in different contexts – why might this be important?

ACTIVITY 2: VISUALISING CHROMOSOMES, Part 1                                                           30 MINS

Practical Task 2.1: Garlic Root Tip Staining

DNA is so long that when it is condensed, the resulting chromosomes are large enough to be viewed quite  easily under a light microscope. To see this, you need to view cells that are actively dividing, since it is only during cell replication that chromatin (DNA and its associated proteins) will condense into chromosomes. Most of our mature, specialised cells do not actively divide; those that do divide are often unspecialised cells called stem cells. These are found in certain locations in the body. For example, although our skin constantly replenishes itself as the outer layers die, the adult skin cells do not replicate; it is a layer of stem cells under the adult skin cells that constantly produce new skin cells for the body.

In plants, there are also regions where cell replication facilitates plant growth. These regions are called meristems. For this activity, we use garlic root tips which have a meristematic region near the tip. We have stained these cells with an appropriate stain that binds to chromatin and squashed them onto a glass slide  in order to view a single layer of cells. You may want to watch the short TechTip video (Staining a Garlic Root Tip) to see how this was performed.

Place one of the prepared slides onto the stage of the compound microscope. Look around the preparation at scanning power (x4) until you see small squarish cells. These small, cuboidal shaped cells form chains because they were recently dividing. As cells leave the meristematic region, they start to grow in size rather than divide. Hence, any regions with larger or longer cells are unlikely to be actively dividing – ignore these regions and only zoom in on areas with < AGRI10051 PRACTICAL 1: Chromosomes, Cell Replication and DNA 2024 Prac 1C/C++ u >cuboidal cells. Using low power (x10), look for a cell in which the chromosomes are visible.

When you do, you should see some cells arrested during mitosis (Fig. 1). Ensure that you can identify the stages of mitosis seen. The four main stages are prophase, metaphase, anaphase, and telophase.

Fig. 1 Cells of the meristematic region – cuboidal and in chains, with some arrested during mitosis

Q2.1  In Figure 1, label a cell at each of the stages of mitosis.

Practical Task 2.2: Mitotic Index

One common variable we measure in dividing cells is the mitotic index of the tissue. The mitotic index refers to the proportion of dividing cells within the tissue. We can estimate this for the meristematic region of the root tip.

You will need to observe three separate fields of view of the meristem under high power (x40). Be careful that there is sufficient clearance between the objective and the slide. Count the total number of cells in the field of view (only whole cells). Count the number of cells in mitosis (any stage where chromosomes are condensed and visible). Then divide the cells in mitosis by the total number of cells you see. This is an estimate of the mitotic index. Repeat this for each field of view to get a more accurate estimate.

Q2.2a. Record your data in the table below and calculate an estimate of the mitotic index for this tissue.

 

Number of cells in mitosis

Total number of cells

Proportion of cells in mitosis

Field of view 1

 

 

 

Field of view 2

 

 

 

Field of view 3

 

 

 

Totals

 

 

 

Mitotic index

 

In the lab you would repeat this 10 times using different fields under high power to get a more accurate estimate.

Q2.2b. Using a pie chart, show the relationship between the time spent at interphase compared to mitosis.

Q2.2c. Suppose the cell cycle for garlic meristematic tissue is 24 hours. How long would a cell spend in mitosis each day?

High mitotic rates are often indicative of cancer, which is simply uncontrolled cell growth. Therefore, mitotic indices are useful when observing cancer pathology. For some cancers, mitotic indices are the most reliable predictor of whether a cancer will reoccur.

Consider the data below on meningiomas, which are tumours arising from the meninges – membranes surrounding the brain and spinal cord. 

Fig. 2 Relationship between mitotic index and survival with no recurrence of cancer in 99 meningioma patients. Solid line denotes a mitotic index

<4, dashed line denotes a mitotic index of 4 or more. Adapted from Kim et al. 2007

Q2.2d. Describe the relationship between mitotic index and the probability of survival as shown in Fig. 2.

Q2.2e. In the study above, an average number of mitoses in 10 high-power fields of view was calculated, and reported as a single number, rather than a proportion. Why do you think this repetition is important in cancer studies?

ACTIVITY 3: DNA EXTRACTION                                                                                               20 MINS

DeoxyriboNucleic Acid (DNA) is found in the cells of living organisms, and encodes the blueprint instructions for life. Extracting DNA  allows us to determine the genotype of individuals and conduct other genetic analyses. We now know enough about  how to extract  DNA that we can even use common household reagents to do this, even from your own cheek cells. Some organisms contain more DNA in their cells than others, which makes them a good choice for some bucket biochemistry DNA extraction. Fruits in particular contain lots of DNA, and today we will extract DNA from strawberries.

To extract DNA, we need a reagent to perform. each of the following steps:

1.       Rupture the cell membrane with a detergent.

2.      Separate the DNA from its associated proteins.

3.       Precipitate the DNA out of solution using alcohol.

Materials

•   Strawberry

•   Ziplock bag

•    Lysis buffer

•    Plastic cup

•   Coffee filter

•    Ethanol (cold)

Method

1.    Remove leaves from the top of a strawberry.

2.    Place the strawberry in a Ziplock bag and pulverise the fruit by pressing down with your hand or rolling a pen back and forth over it (don’t break the bag!)

3.    Add 10 ml of lysis buffer. (To make 100 ml of this solution, we

mixed 90 ml of water with 10 ml of shampoo and ¼ teaspoon of salt.)

4.    Mix lysis buffer with the fruit by pressing down on the Ziplock bag or rolling a pen back and forth over it for 2 minutes.

5.    Place a coffee filter into a cup. Pour the contents of the Ziplock bag into the coffee filter and set aside for 10 minutes.

6.    Discard the coffee filter and its contents. Keep the liquid in the cup (the filtrate).

7.    Pour 30 ml of cold ethanol into a tube, then pour in the filtrate. The DNA should become visible as a white precipitate at this

stage!

8.    Take a glass rod and give it an electrostatic charge it by rubbing it on your shirt a few times. Spool the DNA onto the rod.

Compare your extraction with the others on your bench. Who precipitated the most DNA?

In a research lab, the DNA extracted would be cleaned and dried, and then resuspended in an appropriate solution for subsequent use and/or storage.

Q3.1a. How do you think a detergent helps to rupture the cell membrane? Explain.

Q3.1b. Deduce the function of the salt in the extraction process. (i.e. Why not use plain or distilled water?)

Q3.1c. Consider the steps required to extract DNA listed above. How would you modify this protocol if you were trying to extract DNA from bacterial cells instead?

ACTIVITY 4: CHARACTERISING AUXOTROPHS                                                                   20 MINS

Practical Task 4.1: Setting up the experiment

Your average wildtype bacterium can produce all the organic compounds it requires, such as amino acids and vitamins, from inorganic sources in the environment. This type of bacterium is known as a prototroph. Prototrophs can grow on minimal media agar, which only contains inorganic ingredients.

However, if there is a block in a pathway to manufacture one of these compounds, the bacteria must be provided with the compound in the environment and will not grow on minimal media without it. This strain of bacterium is known as an auxotroph. By adding different compounds to minimal media and seeing which compound allows bacteria to grow, we can establish in which pathway this block occurs.

In this activity, you will determine the supplement requirements of 4 strains of E. coli auxotrophs. Because the bacteria need to time to grow, you will perform the set-up for this experiment this week and analyse the results in the next practical in Week 3.

Work in groups of 4 – you will need to share your results so that all 4 strains can be analysed between you.

Equipment per group

•   4 agar plate with minimal media

•   4 Eppendorf tube containing bacterial suspension – each student in group to choose 1 auxotroph strain (A, B, C or D)

•    Petri dishes with paper tabs labelled: Arg (arginine), Leu (leucine), Meth (methionine), Tyr

(tyrosine), Phe (phenylalanine). These tabs have been soaked in the corresponding compound.

•    Micropipette and tips

•   Sterile spreader

•    Forceps

•   Alcohol

Procedure

When working with the agar plates you want to minimise the exposure of the agar to air and other contaminants like your hands. Therefore, keep the lid on the plate whenever possible.

1.   Collect the Eppendorf tube containing the strain of bacteria that you will work with (A, B, C, or D).

2.   Clearly label around the edge of the base of your petri dish with your seat number, prac day/time, and your bacterial strain (A, B, C or D).

3.   Using a micropipette and tip, transfer 100 µL of the bacterial strain onto the surface of the agar.

4.   Using the sterile spreader, spread the bacteria over the surface of the agar as demonstrated in the TechTip video. Replace the lid on the petri dish.

5.   Sit the agar petri dish on top of the laminated template provided on your bench (see Figure 3 below).

6.   Dip the forceps into the alcohol and carefully shake off excess alcohol.

7.   Using the now dry and sterile forceps, pick up the first paper tab e.g., Arg, and without touching  anything else, lift the lid of the petri dish and place the tab on the surface of the agar, above the corresponding position of the template. Lower the lid of the dish.

8.   Dip the forceps into the alcohol and carefully shake off excess alcohol. Repeat step 7 until each paper tab is in the correct position as per Figure 3 below.

Do NOT invert the plates. Leave them in the tray for incubating, with the tabs facing upwards. These plates will be returned to you in the next practical (Week 3).

Each strain has been spread on minimal media. The paper tabs that you are placing on the agar plate are each infused with a different amino acid. The amino acids in the paper tabs will diffuse out into the agar.

Fig. 3 Positions of paper tabs impregnated with amino acids on each petri dish

Q4.1a. Without using the word ‘control’, explain why one paper tab is infused with water only.

Q4.1b. If, when you check the plates next practical, you were to observe growth of E         

在C++中,NULL和nullptr有什么区别? 这两个定义导致了冲突,C++中的NULL如果和C语言一样也是(void *)0指针,而C++不允许void*隐式转换成其它指针类型,那NULL就无法表示空指针了。因此,使用 nullptr可以增加代码的清晰性,避免类型安全问题。即使在混合C++和C代码时,nullptr也提供了一个明确无误的空指针表示,达到兼容的目的。C++11 引入 nullptr 彻底解决了这些问题,提高语言的安全性、清晰性和现代性。在了解NULL和nullptr背后的故事之后,相信大家以后再也不会用NULL了。 阅读详情

相关推荐

Aruba无线控制器实战:如何用Client Match优化企业办公区漫游(附SNR调优技巧)

本文深入解析了如何利用Aruba无线控制器的Client Match功能优化企业办公区无线漫游体验。通过实战配置,详细阐述了基于SNR(信噪比)的精细化调优策略,包括阈值设定、负载均衡与场景化参数调整,旨在解决终端粘滞、乒乓漫游等问题,实现智能、平滑的无缝漫游。

weixin_28318011的博客 230

深挖C++:类和对象(中)

(先进后出)

xys_678的博客 261

一文讲透什么是ADC/DAC中的DDC、DUC、采样率以及数据率等概念

摘要:ADC/DAC中的采样率与数据率概念不同,采样率是转换器的时钟速率,而数据率是数字输出的实际速率。抽取通过滤波降低数据速率,提升信噪比但牺牲带宽;内插则通过插零和滤波提高采样率,将镜像信号移远但增加延迟和功耗。JESD204B标准的高速转换器需平衡通道数与串行速率,内插/抽取技术是关键。文章还解析了DDC、DUC的应用及优缺点,为高速数据转换设计提供参考。(150字)

weixin_49761275的博客 4285

跟我学c++中级篇—类型定义的方式

本文系统阐述了编程中类型定义的重要性及c++中的实现方式。重点对比了宏定义、typedef与modern using三种机制,指出using在可读性、灵活性和模板支持上的优势,推荐优先使用。同时提醒开发者注意别名滥用、类型歧义、错误信息冗长等问题,强调统一规范与合理设计。最终结论:在现代c++开发中,应以using为主,兼顾简洁性与可维护性,避免陷入命名混乱与编译困境。

fpcc的专栏 400

LPDDR5X内存技术解析:性能提升与优化策略

内存技术在现代计算系统中扮演着核心角色,其性能直接影响整体系统效率。LPDDR5X作为JEDEC最新标准,通过提升数据传输率至8533Mbps、优化能效比15%以上,并扩展突发长度至32字节,显著提升了移动设备的处理能力。这些改进特别适用于5G通信、AI加速(如昇腾芯片)及8K视频处理等高带宽需求场景。技术原理上,LPDDR5X引入了动态电压频率调整(DVFS)和可编程突发长度等创新机制,有效降低了实际应用中的延迟。在工程实践中,合理的PCB布局和信号完整性验证是确保高速稳定运行的关键。随着AI和8K应用的

weixin_29190169的博客 403

BeautyGAN: Instance-level Facial Makeup Transfer with Deep Generative Adversarial Network(2018,妆容迁移)

论文下载地址:BeautyGAN | Proceedings of the 26th ACM international conference on Multimedia 目的:在实例级实现化妆图像和非化妆图像的妆容迁移 方法:全局域集损失和本地实例级损失合并到一个双输入/输出对抗生成网络。步骤:使用一对鉴别器将非化妆面传输到化妆域,鉴别器从域的真实样本中分辨出生成的图像。在域集迁移的基础上,采用基于不同人脸区域的像素级直方图损失来实现实例级迁移。为了保持人脸的一致性和消除伪影,在总体目标函数中加入了.

weixin_53965540的博客 664

【C/C++ 第一次跨越(下):移动语义与 noexcept——不改变行为的性能修复】

本文详解C++11移动语义在迁移至现代C++时的性能优化策略,强调“不改变行为”的前提下通过合理使用移动语义消除深拷贝开销。重点解析移动操作生成规则:析构函数、拷贝函数或const/引用成员会抑制移动构造;noexcept影响std::vector是否选择移动而非回退拷贝。提出“Rule of Zero”原则——用RAII封装资源,避免手动实现特殊成员函数,确保移动语义被正确调用,实现零开销移动与内存安全。

一起学习进步! 312

在 SAP 中,应收票据的收取、到期承兑、贴现均有标准操作路径与事务码,以下按业务场景给出操作步骤、T-code、会计分录(含附 / 不附追索权)

摘要:本文详细介绍了SAP系统中应收票据的全流程处理,包括收款(F-36)、到期承兑(F-34/F-20)和贴现(F-33)的标准操作。重点说明了不同业务场景下的事务码使用、操作步骤及对应的会计分录,特别区分了附追索权与不附追索权贴现的处理差异。同时提供了票据查询(FBL5N)和清账(F-32)的辅助功能指引,并汇总了各业务场景的核心会计分录,为财务人员提供了一套完整的SAP应收票据操作指南。(149字)

金牌架构师 270

【C++】C++17的主要特性

C++17引入多项重要特性:结构化绑定简化多值返回与遍历;inline变量解决头文件中变量定义的ODR问题,支持类内初始化;if/switch初始化语句允许在条件中声明变量,提升代码简洁性;属性语法(如[[nodiscard]]、[[deprecated]])增强代码可读性与安全性;求值顺序明确化,提高程序可预测性。这些改进显著提升了代码的简洁性、安全性和可维护性。

记录我一步步的学习历程,期待无限进步,向星举目! 351

Anomalib库安装以及使用

Anomalib是一个专注于异常检测的深度学习库。它的目标是收集最新的异常检测算法,并提供用于在公共和私有数据集上进行基准测试的工具。该库提供了一系列已实现的异常检测算法,这些算法在最近的文献中有所描述。此外,Anomalib还提供了一套工具,方便开发人员开发和实现自定义模型。该库特别注重基于图像的异常检测,旨在识别数据集中的异常图像或图像中的异常像素区域。通过使用Anomalib,用户可以快速构建和评估各种异常检测算法,以满足其特定需求。

mingo_敏 5203

openpi 入门教程(一)安装、训练、微调与推理

OpenPI是由物理智能团队发布的机器人开源模型和软件包,包含两种主要模型:基于流的扩散视觉-语言-动作模型(VLA)的π₀模型和基于FAST动作标记器的自回归VLA的π₀-FAST模型。这些模型已在超过10,000小时的机器人数据上进行了预训练,并提供了基础模型检查点,支持开箱即用或根据用户数据集进行微调。OpenPI的实验性质意味着它可能不适用于所有平台,但鼓励研究人员和从业者进行创造性实验。运行这些模型需要至少具备NVIDIA GPU,推荐使用RTX 4090或更高规格的显卡。OpenPI支持在Ubu

2506_90492529的博客 5113

【C++碎片化知识补充】C++ 里 int 也算对象?聊聊对象和变量的边界

盯着sessionId不就是个变量吗?变量凭什么能调用函数?后来才反应过来——它当然是对象。是我把对象这个词理解窄了。

2501_93351213的博客 351

VB摄像头监控

该VB模块可对摄像头捕获的画面进行录像等,可在创建的窗口进行控制

【C++ 基础入门】C++11新特性(下):可变参数模板、lambda 表达式与包装器

C++11高阶特性(可变参数模板与参数包展开、emplace_back、lambda表达式与捕获列表、仿函数、std::function包装器)

2601_96587588的博客 273

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册,内含HL7和ASTM)

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

#SQLite 数据库笔记一:(概念 / 终端指令 / SQL 语句 / C 编程 / 回调函数)

数据库 = 数据的仓库,假设数据是海量。能力说明存储数据持久化保存,程序退出数据还在统计数据、分组、排序数据管理增、删、改、查(CRUD)嵌入式设备上也会用数据库(单片机网关、路由器、工业 HMI 都常见),因为 sqlite 体积小、无需服务进程、单文件即可。数据库 = 库 > 表 > 记录(行) > 字段(列)sqlite3 = 开源、C 写的、单文件、免安装、最多 2T 的嵌入式关系型数据库。

lwq20051110的博客 261

1-10 PostgreSQL中多表连接全解:inner/left/right/full/cross join

本文基于 PostgreSQL 15+ 完整拆解 5 种主流连接:内连接、左连接、右连接、全连接、笛卡尔连接。结合可落地的测试数据,演示每种连接的执行逻辑、返回结果,重点剖析 NULL 值对 JOIN 匹配的核心影响,彻底解决多表连接数据丢失、匹配异常、结果错乱的问题。

zhangjw34的专栏 145

蓝桥杯·全国青少年信息素养大赛·电子学会Python/C++考级 备考:莫队算法离线区间查询详解

备赛进行时:第十八届蓝桥杯软件赛报名已于 2026-10-08 10:00 开启、12-18 14:00 截止,省赛定在 2027-04-10(C/C++·Python 程序设计 9:00–13:00);中国电子学会 2026 年 12 月软件编程(C/C++ 一级至十级、Python 一级至六级)考级报名 9/23–12/2 16:00、统考 12-12;全国青少年信息素养大赛 2026—2027 赛季算法应用主题赛也已进入复盘练兵窗口。

IT_Scratch的博客 184

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 170

825 mW 顶上 212 °C:ASM491S 的 105 °C/W、250 mA 短路电流与热关断

25 °C 环境里结温 34.1 °C,125 °C 环境里结温 134.1 °C——后者已经离 150 °C 只有 16 °C 了,但还在范围内。换个角度看同一件事:从 25 °C 和从 125 °C 起算,温升都是 86.6 °C,但一个到 111.6 °C(还在范围内),一个到 211.6 °C(远远超限)。这个算例里 20 °C/W 是我假设的,实际值取决于机壳材料、密封程度、有没有风扇,跨度可以从 5 °C/W 到 50 °C/W 以上。外面 50 °C 的机箱,盒内就是 63.9 °C。

ANSILIC的博客 402

CMake从入门到精通:多模块与配置文件实战

cmake实践领域推荐做法避免做法构建目录始终使用 out-of-source build (在源目录直接运行 cmake,导致生成大量垃圾文件源文件列表显式列出源文件过度依赖,导致新增文件后需重新运行 cmake变量作用域使用target_前缀命令 (如使用全局,污染所有目标的作用域库链接明确指定PUBLICPRIVATEINTERFACE默认不指定,导致依赖传递关系混乱C++ 标准使用或硬编码-std=c++11到通过上述模块化结构、自定义.cmake。

Tomhex的博客 172

【C】Lesson3顺序表 链表

顺序表。

2503_92107148的博客 29

C++课后习题训练记录Day206

在一个城市,蓝泽是一个著名的侦探,他手上有一份秘密情报——一串由数字组成的密码。密码的解析从零开始,即第一个元素是 a0​,第二个元素是 a1​,依此类推。然而,这个密码有个特殊的设定,只有当偶数位置(a0​,a2​,a4​,......)的元素之和达到最大值,才能解开密码的真正含义。在一行上输出一个整数 —— 在反转至多一个子数组(连续子段)后,偶数位置上的元素的最大可能总和。第二行包含 n 个整数 a0​,a1​,...,an−1​。对此代码进行检验,检验后无报错,运行此代码,运行结果正确。

zmzb0103的博客 228

Windows 11 26H2 存储空间清理指南:C 盘瘦身、存储感知与深度清理实操

Windows 11 26H2 C 盘满了怎么清理?本文按四层顺序给出存储感知与清理建议配置、磁盘清理系统级勾选项、WinSxS 与保留存储的 DISM 精简命令,以及文件夹位置重定向和 C 盘无损扩容方法,全程用系统自带工具。

the3clipse的博客 312

【容斥原理计数】题解:P9489 ZHY的表示法_容斥原理_计数问题_前缀和问题转化_算法竞赛C++

给定 $ n $ 个正整数,求区间 $[l,r]$ 中有多少正整数 $ x $ 可表示为 $ \sum \lfloor \frac{y}{x_i} \rfloor $。通过二分确定最大 $ y $,转化为求 $ 1 \sim H $ 中是某些 $ x_i $ 倍数的数的个数,利用容斥原理与 DFS 枚举子集计算,结合 LCM 预判剪枝及去重优化,时间复杂度 $ O(2^n \log V) $,可高效处理 $ r \le 10^9 $ 的数据。

YLCHUP的博客 108

C语言结构体内存对齐与动态内存

int定义整数、float定义小数,而struct定义的是一种复合类型,成员类型可以完全不同:int id;/* 4 字节 *//* 20 字节 *//* 4 字节 */char sex;/* 1 字节 */关键字struct不能省是完整类型名结尾必须有分号——这个分号少了,编译器会报一堆莫名其妙的错结构体名可以随便起(studentaa张三都行),但要有意义这一步初学者最容易混:struct student { /* 只是"画图纸",此时不占内存 */int id;​。

2401_89953644的博客 183

鸿蒙 ArkWeb 踩坑方法论:Chrome 能跑 ≠ 装机能跑(CDP 取证 + 像素验证三通道)

本文不讲单个 bug,而是沉淀一套在鸿蒙 ArkWeb 上可复用的**取证方法论**。先用四个"Chrome 全绿、装机翻车"的真实案例说明为什么浏览器背书无效(keymap 优先级、CSS 层叠压制、DOM 克隆的 CSSOM、渲染中间帧);再给出**取证三通道**——hilog 实时日志、CDP 求值、像素验证,分别回答"事件到没到""DOM/样式真实值是什么""屏幕上到底显示了什么";随后是四条用翻车换来的铁律(先破缓存、Chrome/jsdom 不能背书按键分发、合成事件读数不作结论、灵异现象先怀疑

Sunny,科班出身(计算机本科),但毕业后做解决方案工程师——聊需求、写方案、做交付,代码多年不碰,使用AI做开发,记录真实开发过程 329

C++转Java日记(07)

异常发生后,程序会怎么样:int n = Integer.parseInt("abc") //parseInt是Java提供的静态方法,接收字符串返回int。System.out.println("继续执行");在第一局就会抛出NumberFormatException。如果没有处理,当前方法会异常退出,这个例子中,第二句不会执行,程序打印异常信息并结束。

xinghuayu_lin的博客 75
上一篇: BFF5902 Introduction to risk management 6 – Semester 2 2024Haskell
下一篇: Digital Signal Processing and Digital Filters Practice Sheet 07Python
wx_codinghelp
博客等级 码龄2年 691粉丝 84原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值