SCIE1104 Fisheries health

2022ahcpc(ABCDEHI) 对于区间i~j 如果先手取了左边那么后手一定取得 f[i+1][j]剩下的即为先手取得的分数,反之如果先手取了右边那么后手一定取得f[i][j-1]剩下的即为先手取得的分数。则可得出状态转移方程为f[i][i+k]= sum(i~i+k)-min(f[i][i+k-1],f[i+1][i+k])由于题目给出了删边的操作,但是删边是较为困难的,我们可以反向思考,询问的数据先记录下来,然后从后往前建边,查询航桥。比较坑的一点是N只有70,M却有1e6会给出重边,建边的时候只需要建最小的。 阅读详情

Assignment TWO

Questions and Assessment Guide

Data sets

The relevant data sets can be found on the LMS.

Submitting Assignment TWO

· The assignment must be submitted via the LMS. Please compile the final assignment document into a pdf document before submission.  This is likely to be the safest way to upload your assignment.  People generally find that using the Print to pdf option renders higher quality files compared to the Save as pdf option. The recommended method to crease the pdf for upload is to use the print to pdf option.

· There is a word file called “Start my Assignment” on the LMS. Please download this file. The file has the cover page structure and the appendix heading that you need as part of the Assignment. Complete the cover page with your details; put your answers in the section left blank for your answers; and add your R code under the Appendix heading at the end of the document.

Assignment Due Date

The assignment is due as per the LMS due date. There is no need to wait until the last minute to upload the assignment. Don’t trust the technology to work at 11:55pm on the due date. Give yourself plenty of time for things to go wrong. The UWA policy on late assessment is a per day penalty.  

Assignment content

All assignment answers are to be collated into a single pdf document that includes the (i) cover page details; (ii) answers to the questions; and (iii) an appendix containing the R code.  Start each assignment answer must on a new page.  You also need to use section headings for each part of your answer.  If you consult the unit style. guide you will see that it says “Section headings are to be in 14pt font and in bold.”  For any given answer, the Introduction, Methods, Result, and Discussion headings are all section headings.  Note if you also choose to have question headings, such as Question 1, etc., these are also be formatted as section headings.  Figures and tables must be labelled sequentially as part of each question.  In practice this means you start with Figure 1 and Table 1 again, for each question.  Each figure and table must also have an appropriate caption title.  See the unit style. guide for further details on how to set out the tables and figures.  For Assignment 1, many people lost marks for presentation matters.  Please do focus on the formatting aspect requirement for the assignment.

marking guide

The first three question will be marked out of 20, and question four will be marked out of 3 (so the final mark is out of 63). For questions one, two, and three, use the IMRD format for your answers (see the example write-up as a guide to the process and the mark allocation per section). The lab exercises, including the practice at writing up your results during a computer lab, are closely aligned to the first three assignment questions. For question four use bullet points and just state each answer.    

Note that the specific assignment weights to each section of the IMRD questions might vary slightly from the weights shown in the example you have seen in the practical lab classes. The example is provided as a ‘representative’ illustration only, and the section weights can vary slightly depending on question complexity and tests involved.   

FIGURE Quality: IMPORTANT information

For Assignment 1 figure quality was variable. If you lost marks for figure quality in Assignment 1, please make sure you understand the expected format and standard. If you complete the assignment on a PC, use the metafile format to save your figures from R. If you use a mac, use the pdf file format to save your figures. If you want to get into the finer detail of figure quality control consult the course website/textbook for example code.  The relevant section is section 6.4, saving plots.

For figures that are in a low quality format, such as the bitmap format, there will be a mark deduction. Figure axis labels etc., also need to be correctly proportioned for this assignment. Please take care with your figures.  

If random lines get added to your figures when you use a pdf converter please do not worry. The teaching team is aware of the issues that can occur during conversion to pdf. You will not be penalised.

Assignment 2 must include the relevant R code as an appendix. For Assignment 1, there was no penalty if you did not include the R code as an appendix. For Assignment 2, there will be a mark deduction if you do not include the R code in the appendix. Providing the R code to support your approach to analysis is now a common requirement when communicating science findings that involve statistics.  Providing the code assists with making the results reproducible by others, and is part of good practice in science.

Alpha level

Unless directed otherwise, for testing use an alpha level of 0.05 (α=0.05).

Assignment TWO: SCIE1104

Question 1: Fisheries health

Blue Swimmer Crabs (Portunus armatus) are found between Karratha and Dunsborough.  In WA, they can regularly be caught with a carapace width of 20-25 cm and a claw span of 70-80 cm.  There is a commercial Blue Swimmer Crab fishery, and recreational crabbing is both popular and possible from Shark Bay to Geographe Bay.  In 2006, concern that Blue Swimmer Crab stocks had been depleted resulted in large areas of the WA coast being closed to both commercial and recreational crabbing.  By 2009 stock levels had recovered and the fishery was reopened.  Due to this past experience the Department of Fisheries actively monitors crab stock level along the WA coast.

In 2014 and 2024 the Department of Fisheries recorded the number of breeding Blue Swimmer Crabs observed at different sites along the Western Australian coast.  The number of crabs observed during the sample window provides the Department with information on the crab population.  If there are changes in the overall crab population the Department of Fisheries will change the policy for recreational fishing and either increase or decrease the length of the season when recreational fishers are allowed to take Blue Swimmer Crabs.  You are required to conduct a structured data investigation to determine whether or not there has been a change in the Blue Swimmer Crab population between 2014 and 2024.  Other than p-values (3 dp), report key values to 1 decimal place (20 marks).  

Note 1: In terms of the data source, for this question the data are hypothetical. For the purposes of the write-up you can state that the data have been collected by the Fisheries section of the Department of Primary Industries and Regional Development in accordance with Department policy for data collection.  The context for the question is, however, real.  Between 2003 and 2006 the commercial Blue Swimmer Crab catch collapsed from 226 tonnes to 38 tonnes (a fall of 83%) and the fishery was closed in 2006 to allow the stock to recover.  The fishery was reopened in 2009.

Note 2: Look carefully at the data when you read it into R to make sure you get the data column headings correct.  

Question 2: Water supply

Historically, dam infrastructure provided almost all of metropolitan Perth’s scheme water. Overtime, as the population living North of the Perth CBD increased, the water utility began to develop (extract water from) groundwater resources in the Northern metropolitan zone.  Perth’s major water supply sources then became a combination of dams and groundwater. Perth scheme water is now sourced from: dams (30%), groundwater (37%), desalination (28%), and groundwater replenishment (wastewater recycling) (5%); and the total volume of scheme water supplied is around 300GL. By 2035 it is expected that the water utility will need to supply around 350GL of scheme water, and based on current infrastructure planning, the relative source of supply shares are expected to be: dams (3%), groundwater sources (26%), desalination plants (65%) and groundwater replenishment (6%).  So, by 2035, it is expected that more than 70% of Perth’s scheme water will be sourced from rainwater independent sources.

The average winter rainfall at the Mundaring Weir rainfall data collection point (key reference for dam inflows) for the period 1910 to 1970 was 629 mm.  This is a given reference value.  

Water sourced from desalination plants and water recycling plants is expensive, relative to water sourced from dams.  Both Victoria and New South Wales built unnecessary desalination plants in the 2000s so there is a genuine reason to be concerned that water utilities overinvest in expensive desalination plant infrastructure.  

Dam recharge main occurs during winter and you are to conduct a structured investigation to establish whether the average winter rainfall (winter rainfall is the total (sum of) rainfall in June, July, and August) for the period 2000-2024 (inclusive of the 2000 and 2024 values) is statistically different to the historical reference value of 629 mm per year.  If the current period (2000-2024) winter rainfall is lower than the historic reference level, it is appropriate that the water utility develop rainfall independent infrastructure to supply Perth with scheme water.  If the current level of winter rainfall is the same as the historical average, then the water utility is wasting money by investing in desalination plants.  Other than p-values (3dp), report key values to 1 decimal place (20 marks).

Note 1: The data set has been downloaded for you.  For this question state Bureau of Meteorology weather station 009030 (Mundaring) as the data source.  

Note 2: Some data management is required for this question.

Note 3: Make reference to the 95% confidence interval as part of your answer.  

Question 3: Energy production

Energy generation is a significant source of CO2 emissions.  On 1 January 2017 the royalty for coal extraction that the Victorian government charges increased substantially.  At the time the Victorian government stated that the policy change was consistent with a desire to shift energy generation in Victoria away from (brown) coal-based energy sources towards non-fossil fuel alternatives that would lower CO2 emissions from energy generation in Victoria. 

The Industry Benchmark Emission Index (IBEI) provides an indication of the extent of CO2 emissions per megawatt hour of electricity generated.  Lower IBEI values indicate lower CO2 emissions from energy generation.  It is not necessary to reference the formula in your answer, but for completeness, the formula for calculating the Index is shown in Box 1.    

Box 1. Extract from the Australian Energy Market Operator

Methodology for constructing Industry Benchmark Emission Index (IBEI)

The IBEI is a NEM-wide emission index adjusted for marginal loss factors.  The IBEI is calculated according to the following formula:  

where:

IBEI = Industry Benchmark Emission Index for the NEM (t CO2-e/MWh) adjusted for marginal losses.  

CDEi = Carbon Dioxide Equivalent emission from a generating unit (t CO2-e) as measured at the connection point for the generator.

Ei = Sent Out Energy (MWh) generated from a generating unit, as measured at the connection point.  

MLFi = Marginal Loss Factor applicable for a generating unit for the relevant day.

For Victoria, compare the IBEI data for the month of June 2016 to the month of June 2024 and comment on the results.  The IBEI values are the Adjusted Intensity Index values.  The data values are in the last column in the data files and the column title is: “ADJUSTED_INTENSITY_INDEX”. Report values to 3 decimal places (20 marks).

Note 1: For this question the data sets are from the Australian Energy Market Operator.  In your write-up you can simply state that the IBEI data was sourced from the Australian Energy Market Operator.

Note 2: To obtain the data you need to engage in some data management activities (Pivot Table functions) to sort the data and then combine the relevant information.  If you are struggling with the data management requirement, watch the Practical class week 8 video on downloading and managing IBEI data. The recording covers more than you need for this activity, as the data has already been downloaded for you.  Experience with data management is an activity that you can put on your CV, and is highly valued by employers.

Question 4: Wine and Weather

This question is worth 3 marks only and requires substantial work. The final few parts of an assignment are typically difficult. Depending in the time you have, you may not want to even attempt this question.  If you do not attempt this question the maximum mark for the Assignment is 95 percent. The threshold for a HD grade is 80 percent.   

A proposal has been developed to classify Australian wine regions into one of three categories: Very Hot, Hot, Hot-Warm, Warm, Warm-Cool, Cool, or Cold.  To ensure the classification remains up-to-date, the data used to classify regions is a rolling 20-year window.  The current period analysis will therefore consider the weather data for the period 2005 to 2024 (inclusive).  The Nuriootpa weather station (station reference number 023373) is representative of temperatures in the Barossa Valley wine region of South Australia and will be used for the analysis of the Barossa Valley.

The specific metric proposed to classify wine regions is the average of the maximum and minimum monthly temperature in January.  The available data for this weather station is for the period 1997-2024 and you will need to download both the Max Mean Temperature data and the Mean Minimum Temperature data.  Once you have downloaded the data you create the relevant data column for analysis in Excel as the average of the maximum and minimum monthly average temperatures as follows:

[(Mean Max Jan 1997) + (Mean Min Jan 1997)]/2,

[(Mean Max Jan 1998) + (Mean Min Jan 1998)]/2, …    

…., [(Mean Max Jan 2024) + (Mean Min Jan 2024)]/2.

The proposed methodology to group regions is as follows. The reference temperature for classification as a Cool region is 18 degrees C; the reference temperature for classification for as a Medium temperature region is 22 degrees C; and the reference temperature for classification as a Hot region is 26 degrees.  The criterion proposed to classify wine regions is as follows. A region can be classified as Cool, Medium, or Hot, if it there is insufficient evidence to reject the null hypothesis that the sample is drawn from a population where the mean is equal to 18C, 22C, and 26C, respectively.  If there is insufficient evidence to reject the null for more than one category, a hyphen is be used to join the classifications. For example, if there is insufficient evidence to reject the null hypothesis for a Cool region, and also insufficient evidence to reject the null hypothesis for a Medium region, the region can be classified as a Medium-Cool or a Cool-Medium region (the order of the two region names does not matter).  If there is sufficient evidence to reject the null that the sample is drawn from a population with a mean of 26, and the sample mean is above 26C, the region is classified as Very Hot.  If there is sufficient evidence to reject the null that the sample is drawn from a population with a mean of 18, and the sample mean is below 18C, the region is classified as Cold.  If the sample mean is between 18C and 22C and there is sufficient evidence to reject the null that the mean is 18C and there is sufficient evidence to reject the null that the mean is 22C the region is classified as Cool-Medium.  If the sample mean is between 22C and 26C and there is sufficient evidence to reject the null that the mean is 22C and there is sufficient evidence to reject the null that the mean is 26C the region is classified as Medium-Hot.  

The first step in answering these questions is to go to the Bureau of Meteorology (BOM) website and download the relevant data.  The link below will take you to the relevant section of the BOM website. Instructions that walk you through the steps of getting the data from the BOM site to your computer are provided below.

Data link:

http://www.bom.gov.au/climate/data/

To download the data from the BOM website you need to select the data type you want, which is Temperature and Monthly; and you need to enter the station number details: 023373. You need to download both the mean maximum and mean minimum monthly temperatures as separate downloads, so you will go through the get data process twice.  To access the source data hit the ‘get data’ radio button next to where you enter the station number (see Figure 1).

Figure 1: Screenshot of selecting the monthly mean temperature data for station No. 023373

Once you hit the ‘get data’ radio button you should be taken to a screen such as that shown in Figure 2.  To download the data select the ‘all years of data’ link in the top right hand corner of the page.  Once you click on ‘all years of data’ the download process should start automatically.  Once the files have been download, open the relevant Zip files, and for both the maximum and minimum data file select the file with the name ending in “…_Data12” as this is the file that you want to open (see Figure 3).  If you have opened the correct data file, you should see something like that shown in Figure 4 when you open the file.  Finally, you need to calculate, for each month, the average of the maximum and minimum temperature values.  Once the process of organizing the data is complete you should end up with a file structure that looks similar to that shown in Figure 5.  Note that in Figure 5 the values shown are for the first few years of the relevant data sets, and the values that you actually need for analysis are those for the years 2005 to 2024 (inclusive) only.

Figure 2: Screenshot of source data for station No. 023373

Figure 3: Screenshot of files downloaded and ready to be extracted/opened

Figure 4: Screenshot of what a file that you down load and open should look like

Figure 5: Screenshot of representative data structure post formatting to get monthly average

To answer question four you will need to calculate the mean average temperature of the sample for the period (2005-2014) and the 95% confidence interval around that estimate.  To answer these questions simply use a bullet point style.  There is no need for any extra text for these answers. Keep it short.

The specific questions are:

(i) What is the mean average January temperature for the sample period (2dp)?

(ii) What is the 95% confidence interval lower bound for the sample period (2dp)

(iii) What is the 95% confidence interval upper bound for the sample period (2dp)

(iv) Using the reference decision framework, specify which of the following classifications is the most appropriate classification for the Barossa Valley: Cold, Cool, Cool-Medium, Medium, Medium-Hot, or Very Hot.  Just state the correct classification.

Note 1: The data you download will be for the period 1997 to 2024, but the data required to answer the relevant questions is for the period 2005 to 2024 (inclusive) only.

 

sn74lvc1g14中文数据手册 sn74lvc1g14反相器中文参考资料 立即下载

相关推荐

nxp lpc11c14中文手册

第一章 概述 第二章 存储器映射 第三章 系统配置 第四章 电源管理单元(PMU) 第五章 功率配置文件 第六章 中断控制器 第七章 IO口配置 第八章 管脚配置 第九章 通用输入/输出口 第十章 通用异步收发器(UART) 第十一章 I2C总线接口 第十二章 SSP控制器 第十三章 C_CAN 第十四章 C_CAN片上驱动 第十五章 16位计数器定时器 第十六章 32位计数器定时器 第十七章 看门狗定时器(WDT) 第十八章 系统节拍定时器 第十九章 模数转换器(ADC) 第二十章 Flash存储器编程固件 第二十一章 串行线调试(SWD) 第二十二章 ARM Cortex-M0参考资料

[common 17-14]message‘project 1-1697‘

问题:分析和综合的进程一直为0%,跑不起来,查看log显示[common 17-14],等了很长时间一直没动。解决分析:发现的bd里的microBlaze加的elf文件有问题,重新关联加载elf文件后,可以正常综合了。

m0_62969668的博客 7597

【3d打印】基于Klipper的3d打印远程上位机系统(Qt),klipper源码,通信解析,打印参数设置

基于Klipper的3d打印远程上位机系统(Qt),klipper源码,通信解析,打印参数设置(启庞Kp3s V1)

共享IT之美,共创机器未来 3193

Cortex-M0 LPC11C14中断控制器

LPC11C14(Cortex-M0)微控制器采用的是NVIC(Nested Vectored InterruptController)中断控制器 NVIC中断控制器有一下特点: NVIC是ARM Cortex-M0的一个集成部分         紧耦合的方式中断延迟低         可控制系统的异常及外设中断         NVIC中断控制器支持32个中断源       

#维多利亚的秘密# 3778

STM32G0实战:HAL库与LL库Flash操作避坑指南(附HardFault解决方案)

本文深入剖析了STM32G0系列微控制器在Flash操作中常见的HardFault问题,对比了HAL库与LL库在读写擦除操作上的底层差异与潜在陷阱。文章提供了基于寄存器状态分析的精准调试方法,并给出了经过实战检验的解决方案与健壮的代码框架,帮助开发者有效规避数据丢失与系统崩溃风险。

t8u9v0w1x的博客 731

解密微信DAT图片:一键转换JPG/PNG/GIF的实用指南

本文详细解析微信DAT图片的加密机制及转换方法,提供从定位文件到使用WeijieSoft工具一键转换JPG/PNG/GIF的完整指南。涵盖新旧版微信存储路径差异、批量处理技巧及常见问题解决方案,帮助用户高效恢复重要图片并释放存储空间。

weixin_29305337的博客 3625

VS2017安装警告。未能安装包“Microsoft.VisualCpp.Redist.14,version=14.16.27033.4,chip=x86”

搜索 URL https://aka.ms/VSSetupErrorReports?q=PackageId=Microsoft.VisualCpp.Redist.14;PackageAction=Install;ReturnCode=3 详细信息 已执行的命令: "C:\ProgramData\Microsoft\VisualStudio\Packages\Microsoft.VisualCpp.Redist.14,version=14.16.27033.4,chi...

lg546982075的博客 6956

【大模型】一图看懂3D因果卷积!

本文将系统性地介绍从1D到3D的因果卷积原理,通过直观的动图演示帮助读者理解其工作机制,并重点探讨3D因果卷积在大规模视频生成中的独特价值和应用前景。

xian0710830114的专栏 2201

C语言开发总结(二十七)

C语言15大头文件介绍&&crt0.c代码内容解释和编译器构造    C89(标准C)  有15个头文件 ,这些头文件包含了标准库的函数的声明     1. assert.h     /*  assert.h     assert macro     Copyright (c) 1987, 1991 by Borland Intern

benpaobagzb的博客 1万+

汽车级智能栅极驱动器深度解析 | 连载01:DRV871x-Q1系列产品架构与核心特性

集成度:单芯片集成多通道驱动器、电源管理、电流检测智能化:自适应控制算法,减少外部元件可靠性:多重保护机制,满足汽车级要求灵活性:SPI和硬件两种接口,适应不同应用需求。

VehSwHwDeveloper的博客 1159

〔重庆理工大学〕计算机组成原理课设报告--16位单周期CPU设计

本课程设计的实验平台为Altera Quartus II 软件和Altera Cyclone V Starter 工具箱。(1)Cyclone V是Altera FPGAs家族的一类,它面向低功耗应用。Cyclone V GX 5CGXFC5C6F27C7N 芯片有不同的转换器,按钮,LED灯,七段显示器,HDMI接口,SD卡读卡器以及其他链接等。Cyclone V GX 5CGXFC5C6F27C7N是Starter工具箱的重要组件。(2)测试台包含在测设备(DUT)和用于仿真的模拟输入。

Pretty Boy Fox的博客 1068

数学上的sin17的c语言表达,c语言数学函数的介绍

c语言数学函数的介绍C语言是一种计算机程序设计语言,它既具有高级语言的特点,又具有汇编语言的特点。下面是小编收集整理的语言数学函数的介绍,希望对您有所帮助!c语言数学函数的介绍1、函数名: abs功 能: 求整数的绝对值用 法: int abs(int i);2、函数名: acos功 能: 反余弦函数用 法: double acos(double x);3、函数名: asin功 能: 反...

weixin_40002692的博客 5893

Android 13.0 USB 麦克风音频采集优化:解决延时、杂音和无声问题

摘要:本文针对Android智能会议设备中USB麦克风存在的三大问题(录音延时、概率性杂音和无声)进行了深入分析和优化。通过预填充静音帧降低90%启动延时,分离采集/播放互斥锁消除杂音,采用持久化配置解决无声问题,并新增状态通知机制提升用户体验。优化后测试显示:录音延时从1200-2000ms降至100-200ms,故障率降至0%,CPU占用降低30%。该方案适用于各类USB音频设备和视频会议系统,为低延时音频采集提供了可靠解决方案。

ip0417的博客 231

安装VS2017出现错误Microsoft.VisualCpp.Redist.14;PackageAction:Repair;ReturnCode:3;

这个错误叨扰了我很长时间,因为自己的电脑之前安装过VS2015,后来突然不能用了,然后就在控制面板把它卸了,没想到进入了重装一直失败的循环状态,这里就不多说了。 解决方案:其实经历过这么多的安装开发环境配置错误的问题,觉得学会看日志是很重要的一步。弹出来的错误显示无法安装Microsoft.VisualCpp.Redist.14这个包,点击查看问题,日志里面详细说明:无法找到指定的路径,C:\P...

Spwpun的博客 1万+

【ArcGIS Engine二次开发】入门基础(2):ArcGIS开发方式(VBA、DLL、Add-in、Engine)对比

文章目录2.1 使用VBA进行桌面软件开发2.1.1 VBA开发方式2.1.1 VBA代码的安全性2.2 使用DLL进行桌面软件开发2.2.1 DLL开发方式2.2.2 DLL功能的应用部署2.3 使用Add-in进行桌面软件开发2.4 使用ArcGIS Engine构建独立应用程序 对于桌面GIS应用来说,ArcGIS平台不仅提供了用于开发独立运行的GIS应用软件的二次开发工包ArcGIS Engine,还提供了对ArcGIS Deskop桌面软件进行扩展的开发的话,在开发个具体的GIS 行业应用软件时

智慧空间实验室 6510

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

LPC11C14(Cortex-m0-->ARM7)启动代码分析

启动代码是芯片复位后进入C语言的main()函数前执行的一段代码,主要为运行C语言程序提供基本运行环境。启动代码文件:startup.s。startup.s包含异常向量表和系统初始化代码,保存C语言使用的堆和栈的开始位置,包括异常处理程序和目标板特殊的代码。汇编学习:ARM伪指令,在汇编程序中经常会被使用,包括以下几条:       — AREA      — ALIGN

Alan0521的专栏 3216

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

C语言库函数

c语言函数库 第五章(数学函数) 1. abs、labs、fabs:求绝对值函数 2. acos: 反余弦函数 3. asin: 反正弦函数 4. atan:反正切函数 5. atan2:反正切函数 6. ceil:向上舍入函数 7. cos :余弦函数 8. cosh: 双曲余弦函数 9. div、ldiv:除法函数 10.

tiger的专栏 3047

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

贝叶斯统计 [韦来生编]

贝叶斯(Bayes)统计是近几十年来迅速发展起来的数理统计的一个重要分支。贝叶斯方法与经典统计方法的主要不同之处是进行统计推断时除了利用样本信息外,还要利用参数的先验信息,因此可以提高统计推断或统计决策的效果。它在经济、金融、生物、医学、自然科学和社会科学等许多领域具有广泛的应用。贝叶斯方法的研究已渗透到了统计学的几乎所有领域。作者在给中国科学技术大学概率论与数理统计专业本科生开设的“数理统计”课程中有一章专门讲授“贝叶斯方法和统计决策理论”,近十年来也给中国科学技术大学概率统计专业研究生开设过几次“贝叶斯分析”课。本书是在对过去讲稿的内容作了适当的增减和调整的基础上完成的。  本书共分六章。第1章是绪论,介绍了贝叶斯统计的若干基本概念,同时对必要的数理统计的基础知识有重点地作了回顾。第二章介绍了确定先验分布的若干可供选择的方法。第三章介绍了几类常见统计模型参数的后验分布的主要结果和计算方法。第四章和第五章分别介绍了“贝叶斯统计推断”和“贝叶斯统计决策”的内容。第六章介绍了贝叶斯统计计算的若干方法,包括蒙特卡洛方法和马尔可夫链蒙特卡洛(MCMC)方法以及相关统计软件的简介。本书的每一章附右大量的例题和习题,书末附有常用的几个表格和部分习题解答供读者查用。  大约可在54学时内讲授本书的第1章至第六章的主要内容,教师可根据学时需要选讲本书第1章至第六章的部分内容。书中标“*”号的章节可略去不讲,留给读者作为阅读材料。第六章例题中的R代码和部分例题的数据文件等可从作者个人主页下载。  作者在编写本书的过程中参考了J.O.Berger教授的《统计决策论及贝叶斯分析》和茆诗松教授编写的《贝叶斯统计》等书中的一些内容,以及《贝叶斯分析》一书中由张伟平博士编写的有关贝叶斯统计计算的一些内容。在此表示衷心感谢。  本书编写准备过程中,中国科学技术大学统计与金融系的几个研究生帮助完成了本书部分中文的录入和排版,作者对他们的辛勤工作表示真诚的感谢。高等教育出版社为本书的出版给予了大力支持。在此一并致谢。

CS917 Foundations of Computing - Maths and Stats Statistics

this cons(i) f : Z!(iv) k : N!fi。

bithinkab的博客 1055

2024版最新超全信息收集工具(非常详细)零基础入门到精通,收藏这一篇就够了

要说简单粗暴还是子域名枚举爆破,通过不断的拼接字典中的子域名前缀去枚举域名的A记录进行DNS解析,如果成功解析说明子域名存在。如xxx.com拼接前缀test组合成test.xxx.com,再对其进行验证。但是域名如果使用泛解析的话,则会导致所有的域名都能成功解析,使得子域名枚举变得不精准。nslookup验证下~泛解析域名,成功解析不存在的域名。普通解析,不存在的域名解析会失败。泛解析:使用通配符来匹配所有的子域名,从而实现所有的子级域名均指向相同网站空间。会存在域名劫持、域名恶意泛解析风险。

2402_84205067的博客 5208

MA3071 Financial Mathematics

accepted.1months).where Yt2。

wechat99515681的博客 758

MSIN0154 Individual 1 2024/25Prolog

MSIN01542024/25Term1IndividualContentABCDEF26/11/202410 am10030%notXYXandYXandYH). LetnN= {12,...,nnSNS⊆NN= {1234Swould beS= {12i∈NiN= {0} ∪N= {012,...,n} andS= {0} ∪SS⊆NS。

withyouand2的博客 1055

COMM1170 c/c++,Python

CLO4, CLO6CLO4, CLO6CLO4, CLO53TurnitinExtensions4guide.51 and 2PurposeOverviewProcess。

yhinok666的博客 6546

Exams/ece241 2014 q7a答案

input clk,//endmodule。

shenminyin的博客 397

成品直播源码推荐,实现文字加载效果 文字跳动

以上就是 成品直播源码推荐,实现文字加载效果 文字跳动,更多内容欢迎关注之后的文章。成品直播源码推荐,实现文字加载效果 文字跳动。

云豹网络科技 46万+

c17 语言标准,/std(指定语言标准版本) | Microsoft Docs

/std (指定语言标准版本)10/29/2020本文内容从指定版本的 C 或 C++ 语言标准中启用支持的 C 和 C++ 语言功能。语法/std:c++14/std:c++17/std:c++latest/std:c11/std:c17备注此选项 /std 在 2017 Visual Studio中可用。 它用于控制编译代码期间启用的版本特定的 ISO C 或 C++ 编程语言标准功能。 此选...

weixin_30811007的博客 1万+

noi2017初赛c语言试题,NOIP2017普及组初赛试题及答案

原标题:NOIP2017普及组初赛试题及答案清北学堂信息学金牌教研团今天为学生们整理了NOIP2017普及组初赛试题及答案,供学生们参考哦!——此文2100多文字,大概需要60分钟看完一、单项选择题(共 20 题,每题 1.5 分,共计 30 分;每题有且仅有一个正确选项)1.在 8 位二进制补码中,10101011 表示的数是十进制下的( )。A. 43 B. -85 C. -43 D. -84...

weixin_35713476的博客 978
上一篇: GENG3405 Stress rotation Friction
下一篇: CMP5321 Programming for Network Engineers
wx__codinghelp
博客等级 码龄2年 514粉丝 61原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值