EMATM0061: Statistical Computing and Empirical

能源管理基于MATLAB的企业最大需量预测模型:月内峰值追踪与超限风险模拟分析系统设计 项目介绍 MATLAB 企业最大需量预测|月内峰值追踪与超限场景模拟 内容概要:本文介绍了一个基于MATLAB R2025b的企业最大需量预测项目,旨在通过构建月内峰值追踪与超限风险识别模型,实现对企业电力负荷的精细化管理。项目综合考虑时间周期、环境温度、生产强度、特殊日期及随机扰动等因素,构建模拟数据集,并采用装袋回归树和岭回归等机器学习模型进行负荷预测。通过滚动峰值追踪机制,系统动态整合历史真实值与未来预测值,生成月内最大需量趋势曲线,并结合预设阈值实现超限预警。同时支持多场景模拟,如增产、高温、设备集中启动等,评估不同工况下的超限风险,为企业错峰生产、储能调度等决策提供量化支持。项目注重实用性与兼容性,输出形式包括可视化图表、风险等级标识和多格式数据文件,适用于能源管理教学、工业负荷研究及智能用电原型开发。; 适合人群:具备一定MATLAB编程基础,从事能源管理、电力系统分析、工业自动化或智能制造领域的科研人员、工程师及高校师生,尤其适合工作1-3年、希望深入理解负荷预测与企业用电成本控制的技术人员。; 使用场景及目标:①实现企业月内最大需量的动态预测与滚动追踪,提前识别超限风险;②通过多因素场景模拟评估不同生产与环境条件下对需量的影响;③为错峰生产、设备启停优化、储能调度等能源管理决策提供数据支撑;④构建可复现、可扩展的负荷预测分析框架,服务于实际电能管理系统开发。; 阅读建议:此资源以模拟数据为基础,重点在于模型架构设计与管理应用逻辑,建议读者结合提供的代码实例,在MATLAB环境中动手复现数据生成、模型训练、峰值追踪与可视化全过程,并尝试调整特征参数或引入真实数据以深化理解。 立即下载

**Assignment 5**

**EMATM0061:** ******Statistical** ******Computing and** ******Empirical** ******Methods,** **TB1,** ******2024**

**Introduction**

This assignment is mainly based on Lectures 12, 13 and 14. It is recommended that you watch the video lectures before starting.

**Create** ******an** ******R** ******Markdown** ******for** ******the** ******assignment**

It is a good practice to use R Markdown to organise your code and results. For example, you can start with the template called Assignment02_TEMPLATE.Rmd which can be downloaded via Blackboard. If you try to write mathematical expressions in R Markdown, examples can be found in the document “Assignment_R MarkdownMathformulasandSymbolsExamples.rmd” (under the resource list tab on blackboard course webpage).

You can optionally submit this assignment by 13:00 Monday 21st October, which will help us understand your work but will not count towards your final grade. The submission point can be found under the assignment tab at Blackboards (click the   title “Assignment 05” and upload a pdf file).

**Load** ******packages**

Some of the questions in this assignment require the following packages.

1.     The tidyverse package:

library(tidyverse)

2.      The Stat2Data package and then the dataset Hawks:

library(Stat2Data) data("Hawks")

**1.** ******Exploratory data analys** **is**

This section covers some of the concepts from Lecture 12 on Exploratory Data Analysis.

We will use the Hawks dataset that you have loaded.

head(Hawks) ## Month Day Year CaptureTime ReleaseTime BandNumber Species Age Sex Wing ## 1 9 19 1992 13:30 877-76317 RT I 385 ## 2 9 22 1992 10:30 877-76318 RT I 376 ## 3 9 23 1992 12:45 877-76319 RT I 381 ## 4 9 23 1992 10:50 745-49508 CH I F 265 ## 5 9 27 1992 11:15 1253-98801 SS I F 205 ## 6 9 28 1992 11:25 1207-55910 RT I 412 ## Weight Culmen Hallux Tail StandardTail Tarsus WingPitFat KeelFat Crop ## 1 920 25.7 30.1 219 NA NA NA NA NA ## 2 930 NA NA 221 NA NA NA NA NA ## 3 990 26.7 31.3 235 NA NA NA NA NA ## 4 470 18.7 23.5 220 NA NA NA NA NA ## 5 170 12.5 14.3 157 NA NA NA NA NA ## 6 1090 28.5 32.2 230 NA NA NA NA NA

**1.1** ******Location estimators**

(Q1) Let’s start by computing some location estimators for Hawks’ “Tail” .

First, create a vector called “HawksTail”, the elements of which are from the “Tail” column of Hawks data frame. The first part of the vector should look like:

## [1] 219 221 235 220 157 230

Second, use the “mean” and “median” functions to compute the sample mean and sample median from the vector “HawksTail” . (note that inputs of the “mean”

function are vectors. Type ?mean for further details).

**1.2** **Combining** ******location** ******estimators** ******with** ******the** ******summarise** ******function**

(Q1) Use a combination of the “summarise()”, “mean()” and “median()” to compute  the sample mean, sample median and trimmed sample mean (with q  = 0.5) of the    Hawk’s wing length and Hawk’s weight (i.e., the “Wing” and “Weight” columns). You may need to remove the NA values. What can you say by comparing the results of     the median and the trimmed mean that you obtain?

Your result should look something like this:

## Wing_mean Wing_t_mean Wing_med Weight_mean Weight_t_mean Weight_med ## 1 315.6375 370 370 772.0802 970 970

(Q2) Combine them with the “group_by()” function to obtain a breakdown by species. Your result should look something like this:

## # A tibble: 3 × 7 ## Species Wing_mean Wing_t_mean Wing_med Weight_mean Weight_t_mean Weight_med ## ## 1 CH 244. 240 240 420. 378. 378. ## 2 RT 383. 384 384 1094. 1070 1070 ## 3 SS 185. 191 191 148. 155 155

**1.3** ******Location and dispersion estimators** ******under** ******linear transformatio** **ns**

(Q1) Suppose that a variable of interest x has values x1, ⋯ ,xn. Suppose that    x1, ⋯ ,xn~has a s~ample ~mean A. Let a,~b ∈ ℝ be real numbers and define a new  variable x with x~1, ⋯ ,x~n defined by xi = axi + bfor i = 1,2, ⋯ ,n. What is the  sample mean of x1, ⋯ ,xn as a function of a, b and A? (please write down your  answer as an expression of a, A, and b. You don’t need to use R).

Now using the vector “HawksTail” that you created in Section 1.1 as data and letting a = 2 and b = 3, verify your conclusion using R codes: Compute the mean of

“HawksTail*a+b” and then compare it with the one obtained from the mean of “HawksTail” and your conclusion.

(Q2) Suppose further that x1, ⋯ ,x~n has s~ample variance p and standard deviation  q. W~hat is~the sample variance of x1, ⋯ ,xn? What is the sample standard deviation of x1, ⋯ ,xn? (Please write down your results.)

Now using the vector “HawksTail” that you created in Section 1.1 as data and letting a = 2 and b = 3, verify your result using R codes again.

**1.4** ******Robustness of location estimators**

In this exercise we shall investigate the robustness of several location estimators: The sample mean, sample median and trimmed mean.

We begin by extracting a vector called “hal” consisting of the talon lengths of all the hawks with any missing values removed.

hal<-Hawks$Hallux # Extract the vector of hallux lengths hal<-hal[!is.na(hal)] # Remove any nans

To investigate the effect of outliers on estimates of location we generate a new vector called ““corrupted_hall”” with 10 outliers each of value 100 created as follows:

outlier_val<-100 num_outliers<-10 corrupted_hal<-c(hal,rep(outlier_val,times=num_outliers))

We can then compute the mean of the original sample and the corrupted sample as follows.

mean(hal) ## [1] 26.41086 mean(corrupted_hal) ## [1] 27.21776

Now let’s investigate what happens as the number of outliers changes from 0 to

1000. The code below generates a vector called ““means_vect”” which gives the sample means of corrupted samples with different numbers of outliers. More

precisely, “means_vect” is a vector of length 1001 with the i-th entry equal to the mean of a sample with i − 1 outliers.

num_outliers_vect <- seq(0,1000) means_vect <- c() for(num_outliers in num_outliers_vect){ corrupted_hal <- c(hal,rep(outlier_val,times=num_outliers)) means_vect <- c(means_vect, mean(corrupted_hal)) }

(Q1) Sample median:

Copy and modify the above code to create an additional vector called

““medians_vect”” of length 1001 with the i-th entry equal to the median of a sample ““corrupted_hal”” with i − 1 outliers.

(Q2) Sample trimmed mean:

Amend the code further to add an additional vector called “t_means_vect” of length 1001 with the i-th entry equal to the trimmed mean of a sample with i − 1 outliers, where the trimmed mean has a trim fraction q  = 0.1.

(Q3) Visualisation

Now you should have the vectors

““num_outliers_vect”“,”“means_vect”“,”“medians_vect”” and ““t_means_vect”“ . Combine these vectors into a data frame. with the following code.

df_means_medians <- data.frame(num_outliers=num_outliers_vect, mean=means_vect, t_mean=t_means_vect, median=medians_vect)

Now use the code below to reshape and plot the data. Recall that the function     “pivot_longer()” below is used to reshape the data. Your result should look like:

df_means_medians %>% pivot_longer(!num_outliers, names_to = "Estimator", values_to = "Value") %>% ggplot(aes(x=num_outliers,color=Estimator, linetype=Estimator,y=Value)) + geom_line()+xlab("Number of outliers")

Which quantity is the most robust when the number of outliers is small? (Note that,  in this experiment, the term outliers simply means the artificial data used to corrupt the vector. It is not related to the outliers computed in the next question).

**1.5** ******Box** ******plots and outli** **ers**

(Q1) Use the functions “ggplot()” and “geom_boxplot()” to create a box plot which summarises the distribution of hawk weights broken down by species. Your plot should look as follows:

Note the outliers are displayed as individual dots. (Q2) quantile and boxplots

Compute the 0.25-quantile, 0.5-quantile, 0.75-quantile of the “Weight” grouped by

Species. Your results should look like this

## # A tibble: 3 × 4 ## Species quantile025 quantile050 quantile075 ## ## 1 CH 335 378. 505 ## 2 RT 980 1070 1210 ## 3 SS 100 155 178.

Now compare these values with the boxplot above. Can you explain which parts of the boxplot these numbers correspond to?

(Q3) Outliers

Suppose we have a sample x1, … , xn. Let “q25” denote the 0.25-quantile of the

sample and let “q75” denote the 0.75-quantile of the sample. We can then define the interquartile range, denoted IQR by IQR := q75-q25. In the context of boxplots, an

outlier xi  is any numerical value such that the following holds if either of the following holds:

xi < q25 − 1.5 × IQR, or

xi > q75 + 1.5 × IQR.

Create a function called ““num_outliers”” which computes the number of outliers   within a sample (with missing values excluded). The function should take a vector as input as output a number.

Test your ““num_outliers”” function using the code below:

num_outliers( c(0, 40,60,185)) ## [1] 1

(Q4) Outliers by group

Now combine your function “num_outliers()” with the functions “group_by()” and “summarise()” to compute the number of outliers for the three samples of hawk    weights broken down by species. Your result should look as follows:

## # A tibble: 3 × 2 ## Species num_outliers_weight ## ## 1 CH 3 ## 2 RT 13 ## 3 SS 4

You may want to go back to the above box plot to check the number of dots displayed for each group.

1.6 Covariance and correlation under linear transformations

(Q1) Compute the covariance and correlation between the “Weight” and “Wing” of the “Hawks” data. You can use the cov and cor functions.

(Q2) Suppose that we have a pair of variables: x with values x1, ⋯ ,xn and Y with  values Y1, ⋯ , Yn. Suppose that x1, ⋯ ,xn and Y1, ⋯ , Yn have the sample covar~iance S a~nd corr~elation R. Let~a, b ∈ ℝ be real numbers and define a new variable x with    x1, ⋯ ,xn defined by xi = axi + bfo~r i = 1,~2, ⋯ ,n~. In addition, ~let c, d ∈ ℝ be real   numbers and define a new variable Y with Y1, ⋯ , Yn defined by Yi = cYi + d.

What is the covariance between x(~)1, ⋯ , x(~)n and Y(~) with Y1(~), ⋯ , Y(~)n (as a funct~ion of S~, a, b, c, d~)?Assu~ming~that a ≠ 0 and c ≠ 0, what is the correlation between x1, ⋯ ,xn   and Y with Y1, ⋯ , Yn? Please write down the mathematical expressions.

Let a = 2.4, b = 7.1, c = −1, d = 3, and let x be the hawk’s weight and Y be the

hawk’s Wing. Verify your conclusion above with R codes in a similar way to Section 1.3 (Q1).

**2.** ******Random variables a** **nd discrete** ******random variables**

This section covers some of the concepts from Lecture 13.

Random variables and discrete random variables Suppose we have a probability space (Ω, ℰ, ℙ). A random variable is a mapping X: Ω → ℝ, such that

for every a, b ∈ ℝ, {w ∈ Ω:X(w) ∈ [a, b]} is an event in ℰ

A discrete random variable is a random variable X: Ω → ℝ whose distribution is supported on a discrete (and hence finite or countably infinite) set A ⊆ ℝ

Expectation

The expectation E(X) of the random variable X is defined by E(X) : = ∑x∈ℝx ⋅ px (x).

Linearity of Expectation: Given random variables X1,X2, ⋯Xn and numbers α1, α2, ⋯ , αn, we have

E (Σi1 αi Xi) = Σi1 αi E(Xi)

Equivalent condition for independent random variables

Let X1, ⋯ ,Xk : Ω → ℝ be a sequence of random variables. Then X1, ⋯ ,Xk are

independent if and only if the following relationship holds for every sequence of well-behaved function f1,f2, ⋯ ,fk,

E(f1(X1) ⋯ fk (Xk)) = E(f1(X1)) ⋯ E(fk (Xk)).

**2.1** ******Expectation and variance**

(Q1) Suppose that we have random variables X and Y. Recall that the covariance between X and Y is defined by

Cov(X, Y) : = E[(X − X(‾)) ⋅ (Y − Y(‾))]

where X(‾) and Y(‾) are the expectations of X and Y, respectively.

Now, suppose X and Y are independent. Apply the linearity of expectation and the  above equivalent condition for independent random variables described above, to  prove that Cov(X, Y) = 0. To apply the above equivalent condition for independent random variables, you may choose proper functions f1,f2, ⋯ that you need.

**2.2** ******Distributions**

Suppose that α, β ∈ [0,1] with α + β ≤ 1 and let x be a discrete random variable

with distribution supported on {0,3,10}. Suppose that ℙ(x = 3) = α and ℙ(x = 10) = β and ℙ(x ∉ {0,3,10}) = 0.

Given the random variable x, answer the following questions (Q1), (Q2), …, Q(4).

(Q1) Expectation and variance of a discrete random variable. Please write down the formula of the following key quantities as expressions of α and β .

1.     What is the probability mass function px for x?

2.     What is the expectation of x?

3.     What is the variance of x?

4.     What is the standard deviation of x?

(Q2) Distribution and distribution function.

Recall that the distribution of a random variable maps a subsets of ℝ to a real number.

1.     Write down the distribution Px of x. You can use the indicator function 1s to

“indicate” if a number is in the sets. (To give an example, the distribution of a Bernoulli random variable can be written as P(s) = (1 − q)1s(0) +

q1s (1).)

2.     Write down the distribution function Fx of x

(Q3) Variance and Covariance.

Define a new random variable Y = x1 + x2 + ⋯ + xn where x1,x2, ⋯ ,xn are    independent random variables, each of which has the same distribution as the random variable x.

Derive the variance of Y as a mathematical expression of α, β and n. You can use the conclusion from Question 2.1 (Q1).

(Q4) Carry out an experiment with “R” programming to explore the distribution of the sum of n independent random variables when n is large.

Let Y be defined above, and additionally, let α = 0.2 and β = 0.3. Recall that

x1,x2, ⋯ ,xn are discrete random variables. Explain why the random variable Y is discrete.

Now let’s explore the probability mass function of Y, and see its behaviour when n is large.

(Step 1).

First, write a function called “Gen X numbers” to generate a sample for x1,x2, ⋯ ,xn. The function “Gen X numbers” should take a number “n” as input and return a

vector containing n random numbers generated from the distribution of x.

To generate a single random number of x, first generate a random number from the uniform distribution of [0,1]. If the generated number is in [0,0.5), assign 0 to the

value of x. If the generated number is in [0,5,0.7), assign 3 to the value of x. If the generated number is in [0,7,1], assign 10 to the value of x.

To generate random numbers from the uniform distribution of [0,1], you could use the “runif” function (type ?runif to see the information about runif).

The result may look like this:

Gen_X_numbers(4) ## [1] 0 10 3 0 # the results you get might be different because of randomness

(step 2)

Write a function called “Gen Y samples” to generate a sample of Y. The function

“Gen Y samples” should take m andn as input and return a data frame that has a

column called Y and m rows. The Y column contain sample of Y of size m (i.e., m

random numbers for the random variable Y : = x1 + x2 + ⋯ + xn). You may want to use the “Gen X numbers” function you defined and the “map_dbl” function for

iterations.

The result may look like this:

Gen_Y_samples(5, 2) ## index Y ## 1 1 10 ## 2 2 13 ## 3 3 10 ## 4 4 13 ## 5 5 3 # the results you get might be different because of randomness

(Step 3)

Now let n = 3 and therefore Y : = X1  + X2  + X3 . Generate m : = 50000 samples of Y. Use the “ggplot” and “geom_bar()” function to create a bar plot for the samples of Y.

Of course your results might look different because of the randomness when using the “runif()” function. Notice that Y takes values from a subset of [0,30].

(Step 4)

Now, increase the values of n to 20. Generate a new sample for Y and create a new bar plot for the sample of Y. What are the maximum and minimum values of the samples? What is the sample range?

The minimum value, maximum value, and range of the sample is

(Step 5) Next, increase n to 1000 and do a similar plot for the sample of Y.

The bar plots contain information about the distribution of y : = x1 + x2 + ⋯ + xn []()for different n.

Notice that as we increase n, the distribution of y tends to follow a bell-like shape.   While y is a discrete random variable (no matter how large n is), the distribution looks closer to the distribution of a continuous random variable, which is known as a Gaussian random variable. We will explore this behaviour in our lecture 14.

Matlab实现使用遗传算法的混合能源系统优化.rar 立即下载

相关推荐

压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar

压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 1

df again?–>New File–>–>•••[,2][,3][,2][,3]ΘZ and YΘ−[,2]−1Y in R.−[,2][,3]−−1?} }

bilimint的博客 847

基于斜坡补偿的Buck电路峰值电流+电压电流双闭环控制【附说明文档】(Simulink仿真实现)优快云首页发布文章优快云同步助手LLC谐振变换器开环+闭环软启动仿真设计(Simulink

内容概要:本文围绕三电平VIENNA整流器的双闭环控制与中点电位平衡问题展开仿真研究,提出了一种基于上下电容电压差值补偿的中点电位平衡策略。该策略在传统电压电流双闭环PI控制的基础上,引入电容电压差值作为反馈信号,通过SVPWM调制中冗余小矢量的时间分配实现中点电荷的定向调节,从而在不改变主控制结构的前提下有效抑制中点电位偏差。仿真结果表明,该方法不仅确保直流母线电压稳定跟踪800V给定值,还能显著提升上下电容电压的均衡度,同时保持输入电流低谐波水平,验证了控制策略的可行性和有效性。; 适合人群:电力电子、电气自动化及相关专业的研究生、科研人员及工程技术人员,具备一定的MATLAB/Simulink仿真基础和电力电子拓扑知识背景者更佳。; 使用场景及目标:①掌握三电平VIENNA整流器的工作原理与中点电位波动的成因;②理解电压电流双闭环PI控制的设计要点与参数整定原则;③学习基于差值补偿的中点电位平衡控制策略及其与SVPWM的协同机制;④应用于充电桩、航空电源、通信电源等中大功率单向整流场合的控制系统设计与优化。; 阅读建议:建议结合文中提供的仿真模型与参数设置进行动手实践,重点关注中点电位平衡投入前后电容电压波形的变化,对比分析不同工况下的系统动态响应,深入理解控制策略的作用机理。同时可进一步探索在电网不平衡、轻载等复杂工况下的控制性能,以拓展应用场景。

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 9

一一“scalex。

tellttyby的博客 580

自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标(Matlab代码实现)

内容概要:本文针对“自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标”开展研究,提出一种基于Matlab的仿真方法,实现多机器人在动态环境中对移动目标的协同包围与持续跟踪。该方法综合考虑了机器人的运动学约束与传感器的视线(visibility)限制,设计了分布式控制策略与自适应编队算法,能够在复杂环境下有效维持编队结构的稳定性和任务执行的鲁棒性。研究详细阐述了系统建模过程、控制律设计原理、编队形成与保持机制,并通过Matlab代码实现了完整的仿真验证,展示了算法在不同动态场景下的适应能力与性能优势; 适合人群:具备机器人学、自动控制理论、多智能体系统等相关基础知识,熟悉Matlab编程语言,从事智能系统、协同控制、路径规划与自主导航等方向的研究生、科研人员及工程技术人员; 使用场景及目标:①应用于安防监控、环境探测、灾害救援等场景中的多机器人目标围捕与跟踪任务;②为多智能体协同控制、分布式编队保持、避障与可见性维护等关键技术提供可复现的算法框架与仿真平台;③辅助高校与科研机构在相关领域的教学演示与科研创新,深化对自适应控制与分布式协同机制的理解; 阅读建议:建议读者结合提供的Matlab代码逐模块分析其实现逻辑,重点关注控制律设计、约束处理与自适应机制部分,可通过调整机器人数量、目标轨迹、传感器参数等进行扩展性实验,以深入掌握多机器人协同系统的动态行为与优化方法。

patch_1.23.0.2584_game_No6.android.pak

patch_1.23.0.2584_game_No6.android.pak

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 4

EMATM0061:EmpiricalMethods,TB1,datay want tomakeuseofthefunctions。

withyouand的博客 826

状态估计【卡尔曼滤波kalman】UKF、EKF、粒子滤波PF学习与研究(Matlab代码实现)

内容概要:本文系统地研究了无迹卡尔曼滤波(UKF)、扩展卡尔曼滤波(EKF)和粒子滤波(PF)在非线性系统状态估计中的理论基础与实际应用,并结合Matlab代码实现进行了深入剖析。内容涵盖三种滤波算法的核心原理、数学推导及其在轨迹估计等工程问题中的具体实施方法。通过详尽的Matlab编程实例,展示了如何利用这些先进滤波技术解决如目标跟踪、传感器融合等复杂问题,并特别探讨了BP神经网络与EKF结合的优化训练策略以及粒子滤波在提高状态跟踪精度方面的潜力。该资料为希望掌握现代状态估计算法的研究人员和技术爱好者提供了一套完整的理论与实践指南; 适合人群:具备一定编程基础,尤其是熟练使用Matlab工具,且对控制理论、信号处理或相关工程技术领域有初步了解的研发人员和高校学生; 使用场景及目标:① 深入理解UKF、EKF和PF的基本概念及其在非线性动态系统中进行状态变量估计的应用;② 通过Matlab代码实践加深对各滤波器工作机制的理解,能够独立开发相应的算法以应对诸如轨迹预测、多源信息融合等实际挑战;③ 探索将BP神经网络与EKF相结合的新途径,以期提升模型的学习效率和预测准确性; 阅读建议:此资源不仅提供了坚实的理论支撑,还包括丰富的代码示例,建议读者按照文档结构循序渐进地学习,同时动手实现每一个案例,以便更深刻地把握各种滤波技术的关键细节。对于致力于深入研究状态估计领域的专业人士而言,这是一份极具价值的学习材料。

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 3Processing

#AgeDayMonthYearSpeciesWingWeightTail##1I199199213:30RT385920219##2I229199210:30RT376930221##3I239199212:45RT381990235##4I239199210:50CH265470220##5I279199211:15SS205170“choose()”

youandmet的博客 1101

DXF、DWG工程制图文件查看器

DXF、DWG工程制图文件查看器。 可以在界面中进行测量(包括距离、面积、角度等等) 无需版权,放心使用。

[pcie]gen6 下 L0p

000b~100b: 触发L0p 操作流程协商工作link width 到target link width.为111b:link width 硬件动态调整。硬件动态:Device control 3 register.target link width=111b当pcie链路检测到空闲状态时,设备可以主动进入L0p状态。L0p 是pcie gen6 新引入的链路状态,是L0的子状态。(5)LINK WIDTH:当LINK WIDTH CHANGE.cmd为Request时表示请求的链路宽度。

BIG_APPLE1的博客 1683

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 5R

EMATM0061:EmpiricalMethods,TB1,inRMarkdown,e foundin thedocumenttabonblackboard⋯⋯⋯, Yn?∑x∈ℝx⋅px (x).Σi1αi E(Xi)E(f1(X1)⋯⋯Cov(X,Y)E[(X−X(‾)⋅(Y−Y(‾))]whereX(‾)andY(‾)are theofXandY。

withyouand2的博客 1044

MIT 6.824分布式 LAB4A:ShardCtrler

lab 4要求实现一个使用raft共识算法的分片存储系统。而在lab 4a中,我们仅需实现分片控制器的功能。lab4中的分片存储系统有多个分片,这些数据分布在众多分片上,而每个分片都对应着一个集群组,可能一个集群组负责多个分片,一个集群组内的所有服务器都会使用raft共识算法进行状态的复制。而本实验的重点为分片控制器,主要负责的工作是对集群组和分片之间关系的管理,我们仅需在/src/shardctrler文件夹中对client.go,server.go,common.go这三个文件进行修改即可。注意事项(实

MarksSa的博客 832

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 2R

Hint: type?##Crop##21254Ωc?⊆Ω .

competionty的博客 841

UE5动画革命:如何用Motion Matching技术让你的游戏角色动作更流畅(附实战配置)

本文深入解析了UE5中Motion Matching技术的实战配置与应用。通过对比传统动画状态机的局限,详细阐述了如何构建动画数据库、在UE5中配置Pose Search Database及动画蓝图,并探讨了与IK融合、性能优化等进阶策略。该技术能显著提升游戏角色动作的流畅度与真实感,是下一代动画解决方案的核心。

weixin_29075633的博客 866

Gartner《构建可扩展数据产品建设框架》心得

数据产品化:从概念到落地的实践指南 当前企业正从传统数据需求模式转向数据产品化新范式。本文系统阐述了数据产品的核心价值、定义分类和实施框架,指出成功关键是将数据包装为可复用、可扩展的产品。Gartner框架强调产品思维,提出4阶段12步实施路径,涵盖设计、工程、发布和监控全流程。文章特别提醒要避免7大常见误区,如简单重命名报表、忽视元数据治理等,建议采取MVP策略,90天内完成从价值验证到产品落地的闭环。实施中需平衡技术选型与业务需求,建立跨职能团队,并通过AARRR模型持续追踪产品价值。

2501_91410404的博客 1007

EMATM0061: Statistical Computing and Empirical Methods TB1 2024 8C/C++

μ= 1,σ2 = 6 andσ0(2) = 4.Let ^(y)∈φy(^) .

aboutyou2的博客 851

如何配置SSC CANopen的excel文件

如何配置 CANOpen 的 EXCEL 文件

PI_sunyang的博客 3705

EMATM0061 Statistical Computing and Empirical Methods

df again?if(num<2){a<-1。

wx____codinghelp的博客 2201

环境配置与基础教程:多机多卡分布式训练实战:基于 SLURM 集群调度 YOLOv11,大幅缩短训练周期

摘要: 本文详细介绍了YOLOv11分布式训练在SLURM集群中的完整实现方案。针对单卡训练效率低、环境配置复杂等问题,提出基于多机多卡的分布式优化路径,涵盖硬件选型、RDMA网络配置、PyTorch环境搭建及容器化部署方案。重点解析了YOLOv11的架构演进与核心模块(如C3k2动态卷积),并对比了与YOLOv8的性能差异。通过SLURM调度系统与NFS共享存储,实现训练任务的高效资源分配和数据同步。文中所有配置均基于Ultralytics最新版本验证,为大规模目标检测任务提供了一套可复现的工程实践框架。

ZXSXJ的博客 58

RT-DERT安卓部署教程

这个文档中的代码案例,实现了拍照和选图识别,两个功能,可以看效果图。UI做了美化:显示类别机和数量。代码下载地址:通过网盘分享的文件:android_rtdert.zip链接: https://pan.baidu.com/s/1k6e-d_lov1OPgUmit5i_cA?pwd=hpfi 提取码: hpfi–来自百度网盘超级会员v8的分享。

AIOT魔法师 196

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 658

vue2/3 - 详细对接海康监控实时视频预览和录像回放功能,vue接入使用海康视频监控播放器实时推流等功能,支持hik/rtsp/rtmp/hls/ws取流协议(详细教程与示例代码,一键复制开箱即用

vue2,vue3,海康,vue海康视频监控,海康开放平台,如何接入海康的实时监控,海康威视,Vue实现海康监控视频播放,vue3对接海康视频监控播放、回放的方法流程,实现海康H5视频插件播放视频的实例,web网页接入海康,海康威视的视频vue的录像回放和实时预览,前端vue3项目接入海康威视h5player.js播放器,vue2接入海康威视视频监控平台,使用海康监控H5视频播放,对接海康视频监控,海康视频web插件,web前端在vue中通过海康插件嵌入视频,实现实时预览,vue3海康监控播放器组件,vue

✅ 精选推荐文章 1万+
上一篇: MATH1109 - CORE MATHEMATICS
下一篇: FUSE File Systems
wx____codinghelp
博客等级 码龄2年 771粉丝 115原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值