MATH-UA 121 Calculus

SpringBoot+Vue+MySQL 高校学科竞赛平台 完整可运行版(源码+文档) 本项目基于SpringBoot+Vue+MySQL构建高校学科竞赛管理平台,覆盖学生、教师、领队教师、管理员四大角色,实现竞赛发布、报名、刷题、评分、公示等全流程闭环管理。系统架构清晰,技术主流,配套完整源码、数据库脚本、万字论文、开题报告、答辩PPT及部署文档,支持一键运行,适用于毕业设计、课程设计及院系二次开发,真正实现“开箱即用”。 阅读详情

MATH-UA 121:

Calculus I HW 1

Note: You may consult your classmates or other resources (including tutors) for ideas on

the problems; however, the solutions you turn in must be in your own words and must reflect

your own understanding. Your solutions and write-ups will be checked for textual similarities.

You may not copy from, reword, or paraphrase another student’s work or any other resource

material; such conduct will be treated as a violation of academic integrity. Remember that you

will not learn anything by simply copying, rewording or paraphrasing another person’s work.

You will receive no credit for solely writing the final answer when explanation is necessary. The

below homework specifications will be enforced. If the specifications are not respected, points

might be deducted, or the homework assignment may not be accepted for grading.

Each homework assignment that you upload and submit must:

• be legible, with each problem clearly labeled. Only one problem should appear per page;

for instance, parts (a), (b), and (c) of the same problem can be on the same page, but

Problems 1 and 2 should be placed on separate pages.

• be properly oriented;

• contain only your final version (write drafts of homework solutions on scratch paper);

• not have anything crossed out or contain notes in the margins;

• have proofs and solutions in which all steps are clearly shown and explained.

• have grammatically correct (including punctuation and spelling) complete sentences;

• be written using mathematical terminology and notation correctly;

• have final answers in exact forms (do not approximate unless otherwise stated);

• have a box or circle around your final answer for each question.

• be uploaded in a PDF file on Gradescope with pages matched to the right exercises.

Unless stated otherwise, these problems are intended to be solved without a calculator. While

you are free to use a calculator while completing this assignment, please note that calculators

are not allowed during exams. It may be beneficial to practice solving the problems without

one.MATH-UA 121:

Calculus I HW 1

Written Homework 1

1. Find the domain of the function f (x) =

pp

4 − x −

p

3 + x.

2. In each of the following, describe the elementary transformations required to transform

f (x) into g(x). Then, sketch both f (x) and g(x) on the same axes.

For example, to get −sin(2x) + 1 from sin(x) we take the graph of sin(x) and:

• Reflect the graph with respect to x axis.

• Shift it up by 1 unit.

• Shrink it horizontally by a factor of 2.

(a) f (x) = −x

2

, g(x) = 3(x − 1)

2

(b) f (x) = |x|, g(x) = |

x

2 + 1|

(c) f (x) =

p

x, g(x) = 4 − 3

p

−x

3. Sketch the graph of an example of an even function f that is defined on the interval [−3, 3]

and satisfies all of the given conditions:

(a) lim

x→0+

f (x) = 1

(b) lim

x→1−

f (x) = −1

(c) lim

x→1+

f (x) = −2

(d) limx→−2

f (x) = f (−2)

(e) f (0) = 0

(f) f (2) = 2

y

x

-4 -3 -2 -1 1 2 3 4

-1

-2

-3

-4

1

2

3

4

4. The graphs of the functions g(x) and h(x) are shown below. Determine the following limits.

If a limit does not exist, write "DNE" and explain why.

1 of 2MATH-UA 121:

Calculus I HW 1

g(x)

-3 -2 -1 1 2 3

-1

1

2

3

4

-3 -2 -1 1 2 3

-2

-1

1

2

3

h(x)

-3 -2 -1 1 2 3

-1

1

2

3

4

-3 -2 -1 1 2 3

-2

-1

1

2

3

(a) limx→−2

h(x)

(b) limx→−2

g(x)

(c) limx→1

g(h(x))

(d) limx→−2

h(g(x))

5. Calculate the following limits. If the limit does not exist, write "DNE".

Note: Do not use advanced techniques such as L’Hôpital’s Rule for this problem.

PROFINET方案选型指南:瑞萨/西门子/开源p-net协议栈对比实测 本文基于瑞萨RZ/N2L硬件平台,对瑞萨官方认证协议栈、西门子ERTECH及开源p-net三种PROFINET方案进行了实测对比。重点分析了PROFINET-IRT实时性、CPU/内存资源消耗、开发集成复杂度及许可证成本等核心指标,为工业设备制造商提供了从性能到商业决策的全面选型指南。 阅读详情

相关推荐

用Python模拟随机游走:从一维到三维,直观理解马尔可夫链的常返性

本文通过Python模拟一维到三维的随机游走,直观展示马尔可夫链的常返性特性。使用NumPy和Matplotlib构建模拟器,揭示不同维度下随机游走的返回概率差异,帮助读者理解为什么一维和二维游走具有常返性,而三维游走可能永远迷失。文章包含完整的代码示例和可视化技巧,适合概率论和Python编程爱好者学习实践。

weixin_28694295的博客 402

InnoDB 内存结构总览:Change Buffer、AHI 与 Log Buffer

本文系统梳理InnoDB内存结构中的ChangeBuffer、Adaptive Hash Index(AHI)与LogBuffer。ChangeBuffer缓存二级索引页不在内存时的变更,减少随机IO,仅在页加载时合并;聚簇索引修改立即执行,因数据本身不可延后。AHI基于高频等值查询自动构建哈希索引,加速定位,仅支持等值操作。LogBuffer为redo log内存缓冲,配合磁盘日志实现崩溃恢复。三者均服务于性能优化,其中ChangeBuffer与AHI共享BufferPool空间,而LogBuffer独立

bksczm的博客 307

华为服务器RAID配置避坑指南:如何通过iBMC快速识别阵列卡型号并完成初始化

本文详细解析华为服务器RAID配置全流程,重点介绍通过iBMC快速识别阵列卡型号、硬盘健康诊断及RAID级别选择的场景化策略。提供从iBMC登录到缓存策略调优的实战技巧,帮助工程师避免常见配置陷阱,提升服务器存储系统性能和稳定性。

weixin_28475533的博客 492

信创环境下PageOffice文档控件适配与实践

信创适配做到文档控件这一层,拼的已经不是"有没有国产版本",而是同一个功能在两类终端上是否真的等价。等价的标准很具体:同一次点击能得到同样的结果,同一份公文能得到同样的版式,同一个项目不需要维护两套代码。这背后是三件并不轻松的工作:服务端用一套接口同时支撑两类终端,客户端把两种系统与四种芯片的安装包分发清楚,文档内核层由产品侧跟着 WPS 的版本走。浏览器这一层的压力,则被收进了产品自己的窗口里——升级节奏由产品掌握,不再交给运气。

zi_wu_xian的专栏 335

配置 SAP Web Dispatcher 的实战指南:打通 SAP Fiori、SAP Gateway 与前端系统的关键一跳

SAP Web Dispatcher 在 Fiori 架构中扮演关键角色,作为统一入口处理 HTTPS 请求、实现安全代理和流量分发。它将分散在不同系统的访问路径统一收口,解决浏览器同源策略限制,集中管理 HTTPS 终止和客户端信息传递。典型配置中,Web Dispatcher 监听 443 端口,根据路径将 OData 请求转发至 Gateway 系统,静态资源请求送至前端服务器。SSL 相关配置(如 PSE 文件)确保安全通信,而路由规则(wdisp/system_xx)决定请求转发目标。实施时需注意

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 106

CUDA编程 - Nsight system & Nsight compute 的安装和使用 - 学习记录

在 cuda 编程中,经常会用到 Nsight system 和 Nsight compute 进行性能分析等,下面做个学习总结。本篇包括安装和常用分析思路总结,具体实践操作总结会放在下一篇博客。

点云算法工程师 1万+

第三篇 第 6 课

前置:第三篇第 1 课(stdx 引入),第二篇第 1 课(std.regex)。环境:仓颉 SDK 1.2.0。本文所有代码与输出均逐行实测。

weixin_41618057的博客 557

EMD-LSTM时序预测 | MATLAB实现基于EMD-LSTM时间序列预测(EMD分解结合LSTM长短期记忆神经网络)

EMD-LSTM时序预测 | MATLAB实现基于EMD-LSTM时间序列预测(EMD分解结合LSTM长短期记忆神经网络)

机器学习之心的博客,关注并私信文章链接,获取对应文章源码和数据。 664

【从零理解 Spring AI · 12】MCP 的两种角色:做客户端还是做服务端

上一篇讲了 MCP 的概念:标准协议、三大角色、M+N 替代 M×N。

nice_lcj520的博客 612

3篇1章6节:R基础绘图之图形的保存和导出技巧

高质量图形导出是R语言用户在数据分析和科研工作中的重要技能。通过合理控制图形的分辨率、选择合适的颜色管理方案和文件格式,以及掌握批量保存图形的技巧,可以显著提升图形的展示效果和应用范围。这不仅有助于提高研究成果的展示质量,还能在各种专业场合中展现数据分析的精确性和美观性。

MD Code 1483

2023华为od机试C卷【最富裕的小家庭】Python 实现

在一颗树中,每个节点代表一个家庭成员,节点的数字表示其个人的财富值,一个节点及其直接相连的子节点被定义为个小家庭。现给你一颗树,请计算出最富裕的小家庭的财富和。

MISAYAONE的博客 2046

pcl2启动器下载(Minecraft PCL2 启动器 最新版 安装与使用说明)

摘要:PCL2(Plain Craft Launcher 2)是一款面向 Minecraft 的第三方启动器,支持正式版与快照版本管理、模组与整合包安装、Java 运行时自动匹配,绿色免安装、双击即可运行。适合在 Windows 上玩单机整合包、需要多版本共存或离线启动的用户使用

2611_96675819的博客 153

【SpringBoot笔记44】SpringBoot多数据源配置(方式一:配置多个mapper扫描不同的包路径实现多数据源配置)

在SpringBoot应用开发中,一般情况下,都是只会配置一个数据源信息,之后整个工程都是对当前数据源进行增删改查的操作。但是,在实际开发里面,也有可能会遇到多数据源的情况,例如:当前工程中除了需要访问自己应用的数据库,还需要直接连接第三方系统的数据库进行业务处理,这种情况下,就需要进行多数据源的配置。SpringBoot考虑到了这一点,所以它是支持多数据源的配置的,下面介绍一下如何配置多数据源。

✅ Java 开发工程师 1118

spring boot 4集成SQLLite,及其SQLLite的建库

spring boot 4集成SQLLite,及其SQLLite的建库

weixin_41463944的博客 226

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册,内含HL7和ASTM)

efm32 入门.pdf

本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。

Java 集合容器高频面试题全解:HashMap 树化阈值、1.7 死循环与 ConcurrentHashMap 演进(2026 招聘 JD 真题复盘)

HashMap 树化阈值 8 的泊松分布依据、退化阈值 6 的防抖设计、JDK 1.7 头插成环死循环的排查与修复、1.8 尾插后为何仍线程不安全、ConcurrentHashMap 放弃分段锁的原因与 ForwardingNode 协作扩容、computeIfAbsent 死锁陷阱、大集合找重复的场景题选型,附三层追问链自测。题目来源为 38 期公开招聘 JD 样本与字节、拼多多、建行、美团、快手公开面经。

蒙眼过河 426

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

spdlog 同步日志库使用详解

spdlog是一个轻量级 C++ 日志库,支持同步日志、异步日志、多线程日志、日志文件轮转和自定义日志格式。对于嵌入式 Linux 应用开发,我建议先使用。它可以帮我们完成:日志级别过滤。时间戳和线程 ID 输出。日志格式化。终端和文件输出。多线程安全写入。日志文件按大小或时间轮转。我们不需要自己实现互斥锁、文件写入、日志格式化和轮转等底层功能。

zengjiajun2006的博客 1123

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

JavaSE通关手册:数据类型与变量

代码无需额外处理,编译时编译器自动完成转换。

xys_678的博客 235

IDEA 简介:从零认识 IntelliJ IDEA

IDEA 全称,是由 JetBrains 公司开发的一款主流 Java 集成开发环境(IDE)。它集代码编辑、编译、调试、测试、版本控制、构建管理等功能于一体,被大量 Java 开发者视为日常开发的首选工具。所谓 IDE(Integrated Development Environment,集成开发环境),就是把写代码所需的各类工具整合到同一个界面中。相比只用文本编辑器加命令行编译,IDE 能显著减少重复操作,让开发者把精力集中在业务逻辑上。

ztI10的博客 183

Docker部署linkding:HTTPS与数据备份

部署私人书签库,除了让页面能够打开,还需要考虑几个实际问题:重建容器后数据是否保留、登录和保存是否正常、升级前怎样备份,以及出现 502 或 CSRF 错误时从哪里检查。本文使用 Docker Compose 部署 linkding,采用默认 SQLite 数据库,通过 Caddy 提供 HTTPS,并完成账户创建、数据持久化验证和备份。如果重建后账户或书签消失,应先检查是否换了项目目录、改了挂载路径,或者启动了另一套实例,不要急着重新初始化。遇到权限问题,应根据日志确认具体目录和运行用户,再调整权限。

tedcloud123的博客 191

动态代理两大流派:JDK 代理与子类代理

业务类想加日志,最直白的写法是侵入式修改: 问题很明显:每个方法都要改一遍,改一个业务要动十处。代理模式的解法是:调用方不直接依赖 ,而是依赖一个代理对象。代理对象长得跟目标一模一样,调用它 → 代理先执行增强逻辑 → 再转调真实对象。 关键在于:代理对象的类型是哪来的?这就是"动态"二字的含义:代理类在运行时才诞生。两个角色: 承载增强逻辑, 负责生成代理类。 组装代理并调用: 输出: 业务代码 一行没动,增强逻辑全在 里。这就是 AOP 的味道。 内部四步: 第 2 步 内部:先查 (同一个接口

Android的专栏 658

C++20协程怎么运行?原理与三大核心组件深度剖析

C++20协程是轻量级的无栈状态机,通过co_await、co_yield、co_return实现挂起与恢复,由Promise、协程句柄和Awaitable三大组件协同工作。协程与线程互补,适用于高效管理大量并发I/O任务,显著降低上下文切换开销。其核心在于编译器生成的状态机机制,需配合库(如cppcoro)使用。掌握Promise控制逻辑、句柄生命周期管理及Awaitable语义,是构建高性能异步程序的基础。

Lucis__的博客 332

c++ explicit关键字详解

explicit。

拒绝AI文,努力在AI时代写出感动人心的好文章 169

Teamcenter Java SOA 开发:连接、查询与保存

本文介绍如何通过 Java 调用 Teamcenter SOA 接口实现外部系统对接,涵盖连接登录、查询保存等核心操作。以最小闭环示例展示 Connection、Service、ModelObject 等关键组件的使用,强调错误处理与事务管理要点。梳理了 DataManagement、Query、File Management 等 API 模块分工,并结合“工作移交WebService”案例,说明幂等性设计与流程状态返回的重要性。适用于 Web 门户、ERP 集成等场景,建议批量操作用 bulk 接口优化性

软件工程师文艺 277

Java 项目实战:交友项目后台系统——网关统一鉴权与 B 端管理后台

本次改造通过引入SpringCloud Gateway实现网关统一鉴权与路由,新建mf-admin管理端复用C端域服务(Dubbo调用),实现管理员登录与用户管理四件查询。核心套路:网关白名单+双体系JWT(同工具不同payload)、管理端零直连业务库、分页形态区分(MySQL自动count/Mongo手动count)、浏览器端独立聚合。踩坑12条,附自检清单与后续改造方向,可复用于多角色后台系统。

Wang的专栏 53

TRingBuffer两端都能增删(快递站版)

TRingBuffer 是一个支持两端增删、下标访问且容量动态增长的环形双端队列。它通过无符号索引的永不归零设计,利用减法自动模运算实现空满判断与元素计数,避免了传统环形缓冲浪费格子的问题。内部以票号(索引)标记首尾,扩容时重排元素为连续存储,保证 O(1) 操作与高缓存效率。虽不线程安全,但其高效性使其成为游戏开发中事件队列、命令缓冲等场景的理想选择。

u013768914的博客 315

Mac上装了最新版本的Android Studio,但是没找到jdk的设置选项也没找到jbr的目录

新版Android Studio(2025.3.1+)因三项变更导致常见问题:一、JDK设置移至“DaemonJVM criteria”,新项目默认自动探测或下载JDK;二、JBR目录改名为带版本号的jbr-21等,需进入.app/Contents/查看,或通过About窗口确认运行时;三、命令行缺adb因platform-tools未加入PATH,需在SDK Manager中勾选并配置~/.zshrc中的ANDROID_HOME及PATH。重装或清理残留可解决缺失问题,切勿手动设JAVA_HOME或安装冲

Programming is a highly artistic endeavor 395
上一篇: URBA6006 TsangNokSze
下一篇: ENG 5220 Real Time Embedded Programming
wx____codehelp
博客等级 码龄2年 538粉丝 99原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值