EDPS0254 Practice and Research Module Guide

听故事学语言 · 数据结构篇 · 第五章 藏在文件里的顺序与链 数据结构篇第五章,工业章一,前四章家当的实战回门。拖动进度条为什么秒跳,MP4 登记簿记位置供直达;FAT 文件分配表,链式存储的逻辑、数组实现的身体,1977 年马克·麦克唐纳为软盘设计它;进程档案链表轮转,一头进一头出,内核偏爱链表的连接自由;浏览器后退键,教科书的双向链表对工业界的数组加游标,同一个队形,两种站位法,谁赢谁的战场。 阅读详情

Engineering and Education: Leadership,

Practice and Research Module Guide 2024-25

EDPS0254

Contents

1

Introduction

3

2

Module aims and learning outcomes

4

3

Module teaching and learning methods

5

4

Assessment information

7

5.

Session outlines

16

6.

Reading list

36

2 INTRODUCTION

Welcome to the Engineering and Education: Leadership, Practice and Research module. This blended learning module is designed to give you the opportunity to explore and investigate salient challenges and issues within engineering and education within your own professional context. This is to be done through an engagement with theoretical perspectives and critical reflection on practice.

The module explores four different themes. To explain the content of the module these four different themes are outlined separately below. Throughout the teaching and learning of the module, these themes will be integrated.

The four themes are:

•    Professionalism in the context of engineering and education

•   Approaches to undertaking research in the social sciences

•    Leadership roles in engineering and education, and

•    Evaluating small scale research.

Firstly, the module examines the notion of Professionalism. It does this within the context of engineering and education. There are opportunities for you to consider what professionalism requires of you in your institution and in society and to critically consider the professional standards and policies you are asked to adhere to.

Secondly, the module introduces you to approaches involved in undertaking a small  scale enquiry founded in the social sciences. You will be guided through some of the tools and techniques that can be utilised in small scale research. You will be asked to critically consider these as well as choose a technique that will enable you to explore your own issue in your professional context. You will consider the ethics surrounding professional enquiry.

Thirdly, the module will enable you to consider leadership roles in engineering and education and the application of relevant theory to the leadership of or improvement of practice in engineering education. You may wish to examine a professional issue through a community of practice or apply the strategies of critical friends and mentors.

Finally, the fourth theme of the module is to evaluate the worth undertaking an enquiry. You will review the implications of your own small scale research as well as that of published researchers.

3 MODULE AIMS AND LEARNING OUTCOMES

Aims

This module aims to ensure that participants:

•   Critically examine the concept and use of professional enquiry in enhancing individual and organisational practice in the field of engineering education.

•   Contribute to the improvement of practice in engineering education through engaging in professional enquiry.

•    Develop knowledge and skills in professional enquiry pertinent to engineering education.

•   Critically evaluate a range of approaches to professional enquiry as relevant to engineering education.

•    Develop  a  relevant  conceptual  framework  for  professional  enquiry  in  the context of engineering education.

•    Develop and broaden their own professional practice through analysis, critical reflection  and  enquiry  focusing  on  processes,  contexts,  dilemmas  and outcomes.

Learning outcomes

On successful completion of the module, students will have knowledge and skills in:

•   Critical interrogation of literature and empirical evidence around a chosen area of engineering education.

•   Application of relevant theory to the leadership of or improvement of practice in engineering education.

•    Design of a small-scale enquiry with the intention of understanding and/improving engineering education.

•   Critical awareness of ethical issues in social sciences research.

•    Implementation of an enquiry in an engineering education setting.

•   Critical analysis, independent study skills, report writing and presentation.

•    Independent critical reflection and enquiry.

4 MODULE TEACHING AND LEARNING METHODS

The module will maintain a dialogic approach to teaching and learning, with opportunities for deep, critical engagement with materials, and interaction between students and tutors. The aim is to develop interaction and sustained debate, so the group may learn from the wide range of professional experience represented by staff and students on the module; and to build a learning community that is committed to and convinced of the value of inter-disciplinary and multi-cultural collaboration.

A range of face to face and online learning activities and resources will be used:

•   Whole group lectures

•   Small group sessions

•   Whole group synchronous sessions

•   Synchronous breakout groups and discussion

•    Plenary discussions/ question and answer sessions

•   Online group, pair and individual activities

•   Critical friend activities

•    Reflection on prepared readings

•    Individual tutorials to focus on the development of the professional enquiry

•    Participants’ self-study.

Each session is individually structured to ensure variety of pedagogic approaches and make the most of the opportunities provided by blended learning. Students will also be asked to upload a short presentation on their ideas for their final assignment. All these learning activities are designed to encourage critical engagement with the materials and ideas offered to students, develop expertise , and strengthen generic academic skills. Formative and summative assessment will form. an important part of students’ work within the module (see Assessment Information below). Details are given in the session overviews below and in Moodle.

Attendance

UCL expects students to attend all the scheduled learning events which appear on their timetable as this gives students the best chance of academic success. A central student attendance system RegistryUCL, is used to record attendance at teaching events. For the online sessions attendance is measured by participation. This includes engagement with key readings, activities, group contributions, completion of required tasks and attendance for synchronous sessions. Please consult the module  leader in good time if you have problems with attendance.

Weekly online activities and readings

Weekly online activities

On each week there will be activities for you to engage in online - these are set out within each session. Four of these relate to the specific assignment tasks (see section 4.3).

Readings

Undertaking reading in advance means that you can take part fully in each session and is a crucial part of your engagement with and learning within the module.

Reading for the module is separated into three types:

1.  Essential reading for each session: this is titled pre-session reading

2.  Further readings for each session selected from a range of recommendations available in the Library or on-line, or further sources that you may identify yourself.

3.  General background readings

Additional readings are identified in the module handbook. While this offers a good indication of relevant work, you are welcome to bring to the discussion alternative sources that you have found yourself. Remember that the IOE library is a superb resource for education publications and that the wider UCL library contains excellent wider resources and electronic journals.

Reading Expectations

Before each session you should read the pre-sessional reading. Alongside this try to plan to read more widely from the further reading and general reading lists. Please try and read widely but also later in the module you will want to focus particularly on readings relevant for your coursework.

5 ASSESSMENT INFORMATION

5.1 The Assignment

The enquiry that you undertake will be a small-scale empirical piece of research in the field of engineering and education. You might for instance, explore different approaches to online learning and the use of simulations and experiments; interview three or four practising engineers to explore leadership and professional learning; undertake a focus group with engineering students or practising engineers, or design and implement an online questionnaire to explore perceptions or attitudes about problem-based learning in engineering education using quantitative data.

Developmental tasks throughout the module

There are five tasks that are completed during the module - three short written tasks, the successful approval of your ethics application and a presentation.

Formative feedback will be provided on this tasks.

Formally assessed work - summative assessment

There are two graded components that together contribute to the final grade awarded: 1. A 3,000 word report of the Professional Enquiry that you have undertaken: this is weighted at 75%. 2. A 1,000 word critical reflection that draws on the tasks completed during the module.

The Report has a word length of 3,000 words.

The Critical Reflection has a word length of 1,000 words.

Work that exceeds the maximum stated length of assessment (eg word count or media equivalent) by more than 10% will be reduced by one grade or 10 percentage points. This must not take the mark below the Pass Mark. Any material in addition to the 10% excess may not be taken into account in grading.

There will be no penalties for any submissions which are under the stated length.

For both the Report and The Critical Reflection, the word count does NOT include abstract, appendices, bibliography, references, table of contents or title page. The word count does include footnotes, all references to authors and dates in the text, diagrams, and figures.

5.2 The Presentation

The presentation is an integral part of the assessment. It must be completed. In the presentation, you will outline your enquiry ideas. You will explain why the enquiry is salient to the challenges and issues in engineering and education. You will be able to outline your strategy or strategies of investigation. The presentation will be formatively assessed by a combination of tutor, peer and self-assessment.

The presentation is formative assessment. After presenting, you will be given feedback from a tutor and peers. This feedback will provide a basis with which to move forward to the summative assessment.

5.3 The Tasks

The four tasks will be uploaded to Moodle as the module is in progress.

Each task will include critical reflection on the enquiry process, and evidence of engagement with critical friends.

Task 1

In task 1 you will set out your general issue for enquiry: what is it you are exploring and why? You will frame. this with background reading and literature. Read and provide a critical commentary on at least three other posts from your peers.

Task 2

In Task 2 you will set out the approach that you are taking to your enquiry. For instance, how will you gather data, how will this enable you to answer your questions? Read and provide a critical commentary on at least three other posts from your peers.

Task 3

For Task 3 draft interview or focus group schedules or questionnaires for your intended enquiry. Read and provide a critical commentary of at least three other post from your peers. For example, think carefully about whether the interview/focus group questions make sense and are they sufficiently open to engage your respondents in a dialogue? For a questionnaire think carefully about whether the   questions make sense, the mix of question types and whether there are any there leading questions, for example. In each case, imagine you are an interviewee or a respondent to a questionnaire.

By engaging in the online activities, you will be able to reflect on the process of formulating an approach to professional enquiry. Do respond to the comments that you receive from your peers as part of the dialogic approach to developing your enquiry.

Tasks 1 and 2 should be between 300 and 450 words.

Task 4

Complete your ethical approval form. This must be signed off before you can collect any data.

听故事学语言 · 数据结构篇 · 第六章 栈,后进先出的盒子 数据结构篇第六章,栈。二进制短除法余数为什么要倒着读,谜底是栈;括号匹配先让计数器上场,([)] 一串让它当场折戟,混括号必须栈;逆波兰记法,1924 年卢卡谢维奇发明波兰记法,1957 年汉布林把它倒过来;一件学生时代的四则运算器文物,带着一颗时发时不发的雷,当年调了很久怎么也跑不对,病没变,变的是它发不发作;双栈直接求值与随机表达式对数器一千组零不合;最小栈一步报最小,接雨水单调栈一层一层结算;汉诺塔的调用栈真身,V 字图退役;火车进出站十四种可能,卡塔兰数;链栈与共享栈收章。 阅读详情

相关推荐

GT911触摸驱动避坑指南:从寄存器读取到多点触控处理的5个关键步骤详解

本文深入解析了GT911触摸驱动开发中的关键步骤与常见问题。从硬件初始化、I2C通信建立,到核心寄存器操作、缓冲区状态管理,再到配置表烧录与多点触控数据解析,提供了详尽的避坑指南。文章结合STM32等平台的实战代码,重点阐述了驱动调试中的时序、中断处理和坐标映射等核心要点,帮助开发者高效实现稳定可靠的多点触控功能。

weixin_29189363的博客 677

EDPS0254 Engineering and Education: Leadership Practice and Research Module Guide 2024-25

Education:Research-25EDPS0254132outcomes43methods5475.166.ReadinglistitiesReadingsquestions?enquiry.Tasks。

gave2gift的博客 534

地瓜派RDK X5部署YOLOv11n避坑指南:从Softmax瓶颈到BPU加速的实战解析

本文详细解析了在地瓜派RDK X5开发板上部署YOLOv11n模型时,从性能暴跌到成功优化的全过程。核心在于通过配置`node_info`将模型中的Softmax算子强制在BPU上以int16精度运行,解决了因算子被分配到CPU导致的严重性能瓶颈。实战部署后,模型推理延迟从126ms降至10.8ms,FPS从7.9提升至92.3,实现了显著的性能优化。

beta5的博客 867

头歌 数据结构-串的表示与实现

本关任务是实现串的定长顺序存储结构。使用静态数组char arr[MaxLen]存储字符串,输入字符串后输出其内容、实际长度(通过strlen计算)和存储长度(sizeof(arr))。代码在Begin-End间补充,完成字符串读取与信息输出。测试用例为输入"aaaaa",预期输出为"aaaaa"、5、20。

一名敲代码的苦13程序员 202

PHP证书图片生成

$realname = "姓名"; $schoolname = "学校"; $idcard = "身份证号"; $image = imagecreatefrompng('certification.png'); // 证书模版图片文件的路径 $red = imagecolorallocate($image,00,00,00); // 字体颜色

4038

【自监督学习完整教程】第 1 章:初识自监督学习

摘要: 自监督学习(SSL)是一种利用无标签数据自动生成伪标签进行模型训练的方法,有效降低了人工标注成本。本文对比了监督学习、无监督学习和SSL的差异,重点阐述了SSL通过设计PretextTasks(如图像旋转预测)从数据中提取深层特征的原理。实践部分以PyTorch实现图像旋转预测任务为例,展示了SSL的训练流程。实验表明,SSL能够学习通用视觉特征,适用于计算机视觉、自然语言处理等领域,尤其在标注数据稀缺的场景中表现优异。

u012133341的博客 261

《考研408数据结构》第八章(排序)复习笔记

真题100%选择必考多个算法的特点比较!!必须汇总!!实在记不住谁和【初始状态有关】时就举例子:1、当数组完全有序时;2、当数组完全逆序时;3、快速排序数组第1个枢轴是最小/最大值。

m0_73991249的博客 218

零基础教你学RDMA驱动开发--第8篇:队列对(QP)、完成队列(CQ)与工作请求(WR)机制剖析

本文深入剖析了RDMA(远程直接内存访问)中的核心机制:队列对(QP)、完成队列(CQ)和工作请求(WR)。QP作为通信端点包含发送队列(SQ)和接收队列(RQ);WR是用户提交的操作指令,转换为工作队列元素(WQE)后由网卡异步执行;CQ则提供完成通知机制。文章详细介绍了三者的协作原理,包括QP状态机、WR提交方式、CQ轮询机制,以及关键的信号控制技术(Signaled Mode)来优化性能。同时对比了SEND/RECV和RDMA WRITE两种模式的差异,提供了调试技巧和最佳实践。这些机制共同构成了RD

amy_mhd的博客 160

【数据结构-5】单链表的实现

单链表,具体来说是单向的、不带头的、不循环的链表。链表由一个一个节点组成,每个节点分为数据域和指针域,数据域存放数据,指针域存放下一节点的地址。这样,就可以根据指针域中的地址找到下一个节点,节点就串起来了构成了单链表。

a bit 220

【人工智能】拒绝焦虑,理性突围:AI 时代 Java 工程师的职业重构与进化指南

摘要:在AI技术快速发展的背景下,Java工程师面临职业转型挑战。本文通过MECE原则解构工作内容,划分高替代风险区(如CRUD开发)、高增效潜能区(如逻辑优化)和高核心壁垒区(如架构设计),指出AI对不同任务的影响程度。从劳动经济学视角分析行业将呈现K型分化,初级执行者被替代,而精通AI协作的全栈工程师需求增长。文章强调警惕过度依赖AI导致认知能力退化,并提出转型路径:掌握AI驱动开发(AIDD)、深耕领域驱动设计(DDD)、拓展全流程能力及AI原生应用开发。最终结论指出,未来的核心竞争力在于结合AI工具

奶爸的编程之路,也就一周冷个三天 139

RT-DETR 模型剪枝优化:结构化剪枝对 R18/R50 性能的影响

本文提出分层结构化剪枝策略R18:参数量减少 42%(28M→16.2M),推理速度提升 35%(15→20.3 FPS@Jetson Nano),mAP@0.5 仅降 1.2%;R50:参数量减少 55%(170M→76.5M),推理速度提升 48%(42→62.2 FPS@T4),mAP@0.5 仅降 2.1%。核心价值:为 RT-DETR 提供“精度-效率-部署”平衡的轻量化方案,推动其在边缘设备、工业质检等场景的大规模落地。部署建议。

走向CTO的路上... 466

C++ 数据结构与面向对象:二叉搜索树实现与多态虚函数详解

本文系统讲解二叉搜索树(BST)的迭代实现与C++多态及虚函数底层原理。BST通过非递归方式实现插入、查找、删除,核心在于维护有序性,删除分三种情况处理,替换法为关键技巧。多态基于虚函数表(vtable)与虚函数指针(vfptr),通过基类指针调用重写函数实现运行时动态绑定,需满足继承与虚函数重写条件。抽象类强制接口规范,虚函数表存储函数地址,子类继承或覆盖对应项。二者分别体现数据结构高效性与面向对象灵活性,是C++核心知识点。

2603_95129722的博客 213

产品包装质检实战:基于YOLOv5的智能包装合格检测系统全流程指南

摘要: 针对产品包装质检效率低、漏检率高的问题,本文提出基于YOLOv5的智能检测系统。系统通过采集包装缺陷数据(破损、缺标、封装不良等),利用YOLOv5实现多类别缺陷识别(准确率≥95%),并开发Flask Web界面实现检测可视化与报告生成。实验表明,该系统在30帧/秒的产线速度下可稳定运行,显著提升质检效率。项目涵盖数据标注、模型训练、系统开发全流程,具有工业落地价值,适用于智能制造场景的自动化质检需求。(149字)

LXY_LOVE36的博客 96

【数据结构-8】栈的实现

入栈前先判断,栈的空间是否充足,如果栈顶和容量在一个位置,就要动态开辟内存空间,还是按照4/2倍的capacity来开辟(如果一开始capacity为0就申请4个个单位的空间,否则就按capacity的两倍申请空间),更新ps->arr的指向以及capacity的大小。最后判断栈是否为空,如果所有的右括号都找到了匹配的左括号,栈为空,则返回true。先来看栈的结构,因为我们的栈是基于数组实现的,所以这里定义了一个指向数组的指针,top是指向栈顶的下标,capacity指的是栈的容量。所以,从空间角度来说,

a bit 240

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

数据结构的基本概念和算法的初步认识

本文系统阐述数据结构与算法的基础概念,涵盖数据、数据元素、数据对象的层次关系,数据结构的三要素(逻辑结构、存储结构、数据运算),以及抽象数据类型。重点解析算法的特性与设计要求,并深入讲解时间复杂度分析的核心——大O表示法,通过“只保留最高阶项、忽略常数系数、取最坏情况”三大原则,结合实例剖析O(1)、O(n)等常见时间复杂度,揭示算法效率的本质评估方法。

ACH_YYX的博客 211

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册,内含HL7和ASTM)

数据结构:二叉树,递归转迭代

二叉树的先序遍历,不需要额外信息保存,因为不用返回到父节点,因为已经处理完了,右左右子节点已在栈上,信息够了。而中序与后序是需要保存额外信息的。通用方法中,用一个栈帧保存当前的一些数据,比如局部变量,返回值等,完全是机械式翻译。

憧憬,思考,奋斗,飞翔 194

数据结构-栈

数据结构,栈相关

2501_93884468的博客 495

【计算基础|Redis06】底层数据结构

本文详解Redis 7.4底层数据结构设计:以SDS替代C字符串实现O(1)长度查询与二进制安全;ZSet采用跳表+哈希表组合,兼顾排序与快速查找;小对象用listpack取代ziplist,根除连锁更新问题;List通过quicklist融合紧凑与链表优势;哈希表采用渐进式rehash避免阻塞;整数集合使用intset节省内存。结合OBJECT ENCODING实测,直观展示数据从紧凑编码(int/embstr/listpack)自动切换至通用编码(raw/hashtable)的过程,体现“小则省、大则快

花间相见的博客 349

CF2283F[数据结构]

首先考虑一种暴力解法,当我们建好i之前的图后,当我们添加i的时候,区间[li,ri]中的点都会向i建边,但是这些点中,如果有某两个顶点l,r,满足l<r,那么l就可以通过r间接到达i,因此可以删除l到i的边;初始时我们令所有点放入set中,然后对于每一个i的处理,我们将集合中仍在[l,r]的范围的点弹出,并且将f设置为i,这样我们就得到了所有点的最小跳板;对于每个区间[l,r] 我们要计算这下下标中的f(v)中大于r的数目有多少个;我们令f(v)表示顶点v可到达的最小的顶点;

蒟蒻 165

笔记-论数据结构2

typedef 数据类型 别名return 0;typedef也经常用在结构体上:每次声明结构体变量都要写struct关键字,很麻烦,而且逻辑上也很难受,typedef可以解决这个问题。int x;int y;p.x = 5;p.y = 10;return 0;而利用typedef解决有两种解法:typedef struct 结构体名数据类型 变量名;数据类型 变量名;……}别名;数据类型 变量名;数据类型 变量名;……}别名;实际的运用int x;

fish_zzzz的博客 125

头歌 数据结构-C&C++ 数组实训

本系列任务围绕数组应用展开:第1关统计销售额波动,通过一维数组存储每日数据并计算相邻差值;第2关求最大销售增幅,利用遍历与动态更新最小值和最大增益;第3关模拟“猴子选大王”游戏,通过循环报数剔除编号为3的猴子直至剩一人;第4关计算整数“犯二程度”,将大数以字符串形式处理,统计‘2’的个数并根据符号与奇偶性调整比值。各关均强化数组操作、循环逻辑与边界处理能力。

一名敲代码的苦13程序员 395

关于算法用现成数据结构和手撕

使用Java内置PriorityQueue实现大顶堆求第K大元素,因涉及自动装箱、对象开销及底层数组扩容,效率较低;而手写原地大顶堆直接操作原始int数组,避免装箱拆箱与额外对象,时间复杂度更优。实测显示,手撕堆显著提速,体现底层优化的重要性。

Pniubi的博客 252

【前缀和+复合离散化】题解:双色矩形(two)_数据结构_算法优化_预处理_二维前缀和_STL_C++算法竞赛

给定一个 $n \times n$ 的黑白棋盘,初始按 $i+j$ 奇偶染色,经 $k$ 个格子颜色翻转后,求子矩形中黑白格子数差的绝对值最大值。由于 $n$ 可达 $10^9$,但 $k \leq 50$,可离散化关键点。枚举所有由修改点构成的矩形及其四边向外扩展(共 $16$ 种扩展方式),利用二维前缀和快速计算变化量,结合奇偶性判断多出的格子颜色,最终取最大绝对差。时间复杂度为 $O(k^4)$,在 $k \leq 50$ 下可行。

YLCHUP的博客 214

数据结构:排序

将一组无序的记录(数据元素),按照某个关键字(key)递增或递减的顺序重新排列。

橘为己有的博客 1351

数据结构之图的存储与遍历

本文系统讲解图的存储与遍历核心内容:邻接矩阵(适合稠密图,O(n²)空间)与邻接表(适合稀疏图,O(n+e)空间)两种存储方式;以及广度优先遍历(BFS,队列实现)和深度优先遍历(DFS,递归/非递归双实现)两种遍历算法。强调visited数组防重复、遍历序列不唯一等高频考点,为最小生成树、最短路径、拓扑排序等进阶内容打下基础,是考研与面试必掌握的核心知识点。

qq_34097230的博客 318

【数据结构-7】算法美学之单链表(2)

第二种情况:两条链表的尾节点相交;思路三:找到链表的中间节点,将链表的中间节点作为新链表的头节点进行反转,然后从原链表的头节点和新链表头节点开始比较链表节点值是否相等。我们只要创建一个指针从头节点开始往后走,让slow指针从快慢指针的相遇点开始往后走,这两个指针相遇的节点就是入环的起始节点。在解答这道题之前,先提供一个结论:慢指针每次走一步,快指针每次走两步,快慢指针相遇点和头结点到入环起始节点的距离是相等的。证明:慢指针每次走一步,快指针每次走两步,快慢指针相遇点和头结点到入环起始节点的距离是相等的。

a bit 223
上一篇: EY Data Science Take Home Challenge
下一篇: 2147 Concept and Prototype Development
wx____codehelp
博客等级 码龄2年 538粉丝 99原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值