【openwrt】openwrt 出现 out of 1 hunk FAILED -- saving rejects to file include/linux/overflow.h.rej解决方案

openwrt 版本

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt 23.05.4, r24012-d8dd03c46f
 -----------------------------------------------------

问题日志

 out of 1 hunk FAILED -- saving rejects to file include/linux/overflow.h.rej

 问题描述

       使用diff制作的patch,然后放到package/kernel/mac80211/patches/build目录下,然后编译的时候出现如下错误,patch无法应用

ut of 1 hunk FAILED -- saving rejects to file include/linux/overflow.h.rej

问题分析

<think>我们面对的是在OpenWrt21.02工具链下,针对aarch64架构交叉编译时出现的链接错误:`aarch64-openwrt-linux-muslldcannotfind-lasound`。这表示链接器在默认路径下找不到`libasound.so`(ALSA库)。以下将分步骤解决。###步骤1:确认ALSA库是否已安装在OpenWrtSDK中,ALSA库通常以`alsa-lib`包的形式提供。请检查:```bash#进入OpenWrtSDK目录cdopenwrt-21.02#检查alsa-lib包是否存在makemenuconfig```导航至:```Libraries>Sound>alsa-lib```确保已选中(按`Y`键标记为`<*>`)[^1]。###步骤2:编译并安装alsa-lib若未安装,则需编译:```bashmakepackage/alsa-lib/compileV=smakepackage/alsa-lib/installV=s```###步骤3:定位库文件路径安装后,库文件通常位于:```$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so```验证路径:```bashls-l$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so*```###步骤4:修改Makefile链接参数在项目Makefile中添加库搜索路径:```makefile#添加库搜索路径exportLDFLAGS+=-L$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib#显式链接libasoundexportLIBS+=-lasound```###步骤5:处理交叉编译依赖ALSA库依赖其他库(如`pthread`、`dl`),需一并链接:```makefileexportLIBS+=-lasound-lm-ldl-lpthread```###步骤6:更新工具链环境执行工具链环境设置脚本:```bash#在OpenWrtSDK目录下sourcestaging_dir/target-aarch64-openwrt-linux_musl/usr/bin/env-setup```###替代方案:直接指定库路径若上述无效,可在链接命令中直接指定绝对路径:```makefileyour_target:$(OBJECTS)$(CC)$(LDFLAGS)$^-o$@\$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so```###常见问题排查1.**库文件架构不匹配**:```bash#检查库文件架构file$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so```输出应为:`ELF64-bitLSBsharedobject,ARMaarch64`2.**符号链接缺失**:确保存在指向实际库的符号链接:```bash#创建符号链接(若缺失)cd$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/libln-slibasound.so.2libasound.so```>**关键点**:OpenWrt的库路径与标准Linux不同,必须通过`$(STAGING_DIR)`访问目标平台的库[^2]。§§相关问题§§1.如何在OpenWrt中为其他架构(如mipsel)添加缺失的库文件?2.交叉编译时如何正确处理动态库的运行时加载路径(RPATH)?3.如何验证交叉编译的二进制文件在目标设备上的动态库依赖?</think>### 解决 `aarch64-openwrt-linux-musl ld cannot find -lasound` 错误 #### 1. **确认 ALSA 库是否安装** 在 OpenWrt 21.02 SDK 环境中检查 ALSA 库: ```bash # 进入 OpenWrt SDK 目录 cd openwrt-21.02 # 检查 alsa-lib 包 make menuconfig ``` 导航至: ``` Libraries -> Sound -> alsa-lib ``` 确保标记为 `<*>`(按 `Y` 键选择)[^1] #### 2. **编译并安装 ALSA 库** ```bash # 编译 alsa-lib 包 make package/alsa-lib/compile V=s # 安装到 staging_dir make package/alsa-lib/install V=s ``` #### 3. **验证库文件路径** 安装后库文件位于: ```bash ls -l staging_dir/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so* ``` 典型路径: ``` staging_dir/target-aarch64-openwrt-linux_musl/usr/lib/libasound.so.2.0.0 ``` #### 4. **修改 Makefile 配置** 在项目 Makefile 中添加: ```makefile # 添加库搜索路径 export LDFLAGS += -L$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/lib # 显式链接 libasound export LIBS += -lasound # 添加其他依赖库(ALSA 需要) export LIBS += -lm -ldl -lpthread ``` #### 5. **更新工具链环境** ```bash # 在 OpenWrt SDK 中运行 source staging_dir/target-aarch64-openwrt-linux_musl/usr/bin/env-setup ``` #### 6. **创建符号链接(可选)** 如果只有 `libasound.so.2` 没有 `libasound.so`: ```bash cd staging_dir/target-aarch64-openwrt-linux_musl/usr/lib ln -s libasound.so.2 libasound.so ``` #### 7. **交叉编译验证** 测试链接器能否找到库: ```bash $(TOOLS)ld -lasound --verbose ``` 输出应包含: ``` attempt to open .../libasound.so succeeded ``` ### 常见问题解决 1. **架构不匹配错误**: ```bash # 检查库文件架构 file staging_dir/.../libasound.so ``` 输出应为:`ELF 64-bit LSB shared object, ARM aarch64` 2. **头文件缺失**: 在 Makefile 中添加: ```makefile CFLAGS += -I$(STAGING_DIR)/target-aarch64-openwrt-linux_musl/usr/include ``` > **重要提示**:OpenWrt 的库路径与标准 Linux 不同,必须通过 `$(STAGING_DIR)` 访问目标平台的库[^2]。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

wellnw

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值