华三交换机irf 堆叠配置_H3C S5500-EI IRF堆叠的典型配置

H3C S5500-EI IRF堆叠的典型配置

一、组网需求：

配置三台S5500-EI交换机进行链型堆叠，并分别配置成员编号为1、2、3。线缆连接方式如图所示

二、组网图：

三、配置步骤：

(1)三台设备不连堆叠线缆，分别上电，分别配置

#在Switch 1上的配置。

system-view

[Switch1] irf member 1 renumber 1

Warning: Renumbering the switch number may result in configuration change or loss. Continue?[Y/N]:y

[Switch1] irf member 1 irf-port 1 port 2

#在Switch 2上的配置。

system-view

[Switch2] irf member 1 renumber 2

Warning: Renumbering the switch number may result in configuration change or loss. Continue?[Y/N]:y

[Switch2] irf member 1 irf-port 1 port 2

[Switch2] irf member 1 irf-port 2 port 3

#在Switch 3上的配置。

system-view

[Switch3] irf member 1 renumber 3

Warning: Renumbering the switch number may result in configuration change or loss. Continue?[Y/N]:y

[Switch3] irf member 1