无线AP WYB的配置信息：
!
! Last configuration change at 11:13:20 UTC Wed Apr 17 2002 by cisco
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname cisco-wyb
!
!
logging rate-limit console 9
enable secret 5 $1$h/H.$ntuNR52CkW7LG2EurcvqN/
!
no aaa new-model
no ip routing
no ip cef
ip dhcp excluded-address 192.168.35.1
ip dhcp excluded-address 192.168.35.4
ip dhcp excluded-address 192.168.35.128 192.168.35.254
!
ip dhcp pool test
 network 192.168.35.0 255.255.255.0
 default-router 192.168.35.1
 dns-server 202.96.128.166 202.96.128.143
!
!
!
!
dot11 syslog
!
dot11 ssid cisco-wyb
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii Cisco@2014
!
!
dot11 guest
!
power inline negotiation prestandard source
!
!
username Cisco password 7 060506324F4129121F0E405B5D56
!         
!
bridge irb
!
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption mode ciphers aes-ccm
 !
 ssid cisco-wyb
 !
 antenna gain 0
 speed  basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
 channel 2437
 station-role root
 l2-filter bridge-group-acl
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 antenna gain 3
 speed  basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 spanning-disabled
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 bridge-group 1 spanning-disabled
 no bridge-group 1 source-learning
!
interface BVI1
 ip address 192.168.35.130 255.255.255.0
 no ip route-cache
 ipv6 address dhcp
 ipv6 address autoconfig
 ipv6 enable
!
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
 transport output all
line vty 0 4
 login local
 transport input all
 transport output all
line vty 5 15
 login
 transport input all
 transport output all
!
end