vbaspdelphi的专栏

http://www.h3c.com/cn/Service/Document_Center/Switches/Catalog/S3100/S3100-EI/Configure/Operation_Manual/H3C_S3100_OM-Release_22XX(V1.00)/201202/738002_30005_0.htm interface Ethernet 1/0/1 stp disablei

配置模式 clock timezone CST add 08:00:00 clock protocol none 一般模式下 clock datetime 17:28:45 08/14/2017

在h3c交换机上acl number 3100 description "for outbound router acl not permit outside access our 23 port" rule 100 deny tcp destination-port eq telnet rule 10000 permit ip

简介加入giga1/0/3和giga1/0/5是互联A点和B点之间的两根专线，为了防止一条线故障造成业务影响，两根线的防单点措施是使用smart-link技术。最关键的地方是 stp region-configuration，虽然我还没怎么搞清楚为啥不绑起来用呢？ 因为smart-link只要求链路的一方操作即可，无需两方，实时起来比较容易些。主要配置# 防止配置的时候造成环路，先把口子都down

first device reset saved-configuration interface ten-gig 1/0/51 shutdown interface ten-gig 1/0/52 shutdown irf member 1 renumber 1 irf member 1 priority 20 irf-port 1/2 port group interface ten-giga1/0

收到了这个报警 2017-09-19T08:58:43+08:00 2017 SW-A-4 %%10DEV/1/FAN_DIRECTION_NOT_PREFERRED: -Slot=2; Fan 2 airflow direction is not preferred on slot 2, please check it. 检查 [SW-A-4]dis fan Slot 1: Fan 1: