BEX 3000 - Professional Development for Business S2 2024Java

Java Python BEX 3000 - Professional Development for Business

Report

Target Company for S2 2024: Guzman Y Gomez

Value

The report accounts for 30% of your total marks for the unit. It is directly connected to the following assessment tasks:

• Research Plan Presentation

Assessment task

purpose

You, as an external consultant, will write a 1000-word report for the Board identifying the 3 most important issues for the company going forward

based on its Australian operations. These three issues must focus on

three different disciplines (e.g. HR, Marketing, Finance, Accounting). Your report includes evidence as to why these 3 issues have been chosen and why they require attention from top management (either because they

represent problems or opportunities for the company) . Your report will provide advice on what the company should do in order to improve in

these 3 key areas (or take advantage of the opportunities as identified), along with supporting reasons for the suggested courses of action.

Learning Outcomes

• Synthesise high quality industry information (reports, publications, statistics) to provide relevant business insights and make informed decisions

• Analyse and evaluate business related inputs in order to identify areas of growth, differentiation and improvement

• Communicate in written and verbal form. to produce professional artefacts

Your

assessment task

Your report should be concise and can be written, where beneficial, in dot points. It should have a professional design and layout that is tailored to its intended audience, the board.

Text should be 12pt, double spaced and submitted as either a Word Document or PDF.

Word Limit &

conditions

1000 words plus an appendix. The appendix can be large. The appendix should be awritten document synthesising the main supporting evidence. While there is no minimum or maximum length for the appendix, it

around 5000 words is a guide as to what would normally be expected.

Due Date

Friday 11.55PM in Week 11

Submission

● Via Moodle Assignment Submission.

● Turnitin will be used for similarity checking of all submissions.

Assessment Criteria

You will be assessed on your ability to demonstrate the following:

- Analyse and evaluate of business-related inputs

- Synthesize information

- Produce professional communication

Late

Penalties

● 10% deduction per calendar day or part thereof for up to one week

● Submissions more than 7 calendar days after the due date will receive a mark of zero (0) and may not receive assessment

feedback

Feedback

Feedback will be provided on student work via:

● general cohort performance

● specific student feedback ten working days post submission

INSTRUCTIONS

You will carry out your research plan in order to submit a high-quality professional report to the board. Your research plan identified 5 key sources of information. You are expected to use these and additional sources of information you have researched. The SWOT analysis you did for your research plan presentation should also assist you to identify the three issues you will focus on in this report.

For each of the 3 issues you need to address:

-    What it is (either a problem or an opportunity)

-    What is causing it/ What its ramifications are, positive or negative (with evidence)

-    What are the next steps for the company to take?

Your report has a word limit of 1000 words +/-10%, however, you are able to include an appendix, and should reference it in your report.

It is expected you will include a reference list and in-text referencing as appropriate         

【四旋翼无人机】具备螺旋桨倾斜机构的全驱动四旋翼无人机:建模与控制研究(Matlab代码、Simulink仿真实现)内容概要:本文围绕具备螺旋桨倾斜机构的全驱动四旋翼无人机展开研究,重点探讨其系统建模与控制策略,结合Matlab代码与Simulink仿真实现。文章详细分析了无人机的动力学模型,特别是引入螺旋桨倾斜机构后带来的全驱动特性,使其在姿态与位置控制上具备更强的机动性与自由度。研究涵盖了非线性系统建模、控制器设计(如PID、MPC、非线性控制等)、仿真验证及动态响应分析,旨在提升无人机在复杂环境下的稳定性和控制精度。同时,文中提供的Matlab/Simulink资源便于读者复现实验并进一步优化控制算法。; 适合人群:具备一定控制理论基础和Matlab/Simulink仿真经验的研究生、科研人员及无人机控制系统开发工程师,尤其适合从事飞行器建模与先进控制算法研究的专业人员。; 使用场景及目标:①用于全驱动四旋翼无人机的动力学建模与仿真平台搭建;②研究先进控制算法(如模型预测控制、非线性控制)在无人机系统中的应用;③支持科研论文复现、课程设计或毕业课题开发,推动无人机高机动控制技术的研究进展。; 阅读建议:建议读者结合文档提供的Matlab代码与Simulink模型,逐步实现建模与控制算法,重点关注坐标系定义、力矩分配逻辑及控制闭环的设计细节,同时可通过修改参数和添加扰动来验证系统的鲁棒性与适应性。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值