Address Family is not supported

本文详细解释了在使用Winsock进行网络编程时可能遇到的各种错误码及其含义,帮助开发者理解并解决网络通信过程中出现的问题。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

今天在用winsock时又碰到这个问题,在网上找了很多,有个解释“

被请求的地址在它的环境中是不合法的。通常地在bind()函数试图将一个本地机器不合法的地址绑扎到套接字时产生。它也可能在connect()sendto()WSAConnect()WSAJoinLeaf()WSASendTo()函数调用时因远程机器的远程地址或端口号非法(如0地址或0端口号)而产生。”很和自己的原因,在认真看了看,发现是在设置RemoteHost时设置为空了。下面附上Windows Sockets错误码扩展描述

WSAEACCES                          (10013)             Permission denied.

试图使用被禁止的访问权限去访问套接字。例如,在没有使用函数setsockopt()SO_BROADCAST命令设置广播权限的套接字上使用函数sendto()给一个广播地址发送数据。

 

WSAEADDRINUSE                 (10048)             Address already in use.

正常情况下每一个套接字地址(协议/IP地址/端口号)只允许使用一次。当应用程序试图使用bind()函数将一个被已存在的或没有完全关闭的或正在关闭的套接字使用了的IP地址/端口号绑扎到一个新套接字上时,该错误发生。对于服务器应用程序来说,如果需要使用bind()函数将多个套接字绑扎到同一个端口上,可以考虑使用setsockopt()函数的SO_REUSEADDR命令。客户应用程序一般不必使用bind()函数——connect()函数总是自动选择没有使用的端口号。当bind()函数操作的是通配地址(包括ADDR_ANY)时,错误WSAEADDRINUSE可能延迟到一个明确的地址被提交时才发生。这可能在后续的函数如connect()listen()WSAConnect()WSAJoinLeaf()调用时发生。

 

WSAEADDRNOTAVAIL         (10049)             Cannot assign requested address.

被请求的地址在它的环境中是不合法的。通常地在bind()函数试图将一个本地机器不合法的地址绑扎到套接字时产生。它也可能在connect()sendto()WSAConnect()WSAJoinLeaf()WSASendTo()函数调用时因远程机器的远程地址或端口号非法(如0地址或0端口号)而产生。

 

WSAEAFNOSUPPORT            (10047)             Address family not supported by protocol family.

使用的地址与被请求的协议不兼容。所有的套接字在创建时都与一个地址族(如IP协议对应的AF_INET)和一个通用的协议类型(如SOCK_STREAM)联系起来。如果在socket()调用中明确地要求一个不正确的协议,或在调用sendto()等函数时使用了对套接字来说是错误的地址族的地址,该错误返回。

 

WSAEALREADY                    (10037)             Operation already in progress.

当在非阻塞套接字上已经有一个操作正在进行时,又有一个操作试图在其上执行则产生此错误。如:在一个正在进行连接的非阻塞套接字上第二次调用connect()函数;或取消一个已经被取消或已完成的异步请求(WSAAsyncGetXbyY())。

 

WSAECONNABORTED           (10053)             Software caused connection abort.

一个已建立的连接被你的主机上的软件终止,可能是因为一次数据传输超时或是协议错误。

 

WSAECONNREFUSED            (10061)             Connection refused.

因为目标主机主动拒绝,连接不能建立。这通常是因为试图连接到一个远程主机上不活动的服务,如没有服务器应用程序处于执行状态。

 

WSAECONNRESET                (10054)             Connection reset by peer.

存在的连接被远程主机强制关闭。通常原因为:远程主机上对等方应用程序突然停止运行,或远程主机重新启动,或远程主机在远程方套接字上使用了“强制”关闭(参见setsockopt(SO_LINGER))。另外,在一个或多个操作正在进行时,如果连接因“keep-alive”活动检测到一个失败而中断,也可能导致此错误。此时,正在进行的操作以错误码WSAENETRESET失败返回,后续操作将失败返回错误码WSAECONNRESET

 

WSAEDESTADDRREQ           (10039)             Destination address required.

在套接字上一个操作所必须的地址被遗漏。例如,如果sendto()函数被调用且远程地址为ADDR_ANY时,此错误被返回。

 

WSAEFAULT                          (10014)             Bad address.

系统检测到调用试图使用的一个指针参数指向的是一个非法指针地址。如果应用程序传递一个非法的指针值,或缓冲区长度太小,此错误发生。例如,参数为结构sockaddr,但参数的长度小于sizeof(struct sockaddr)

 

WSAEHOSTDOWN                 (10064)             Host is down.

套接字操作因为目的主机关闭而失败返回。套接字操作遇到不活动主机。本地主机上的网络活动没有初始化。这些条件由错误码WSAETIMEDOUT指示似乎更合适。

 

WSAEHOSTUNREACH           (10065)             No route to host.

试图和一个不可达主机进行套接字操作。参见WSAENETUNREACH

 

WSAEINPROGRESS               (10036)             Operation now in progress.

一个阻塞操作正在执行。Windows Sockets只允许一个任务(或线程)在同一时间可以有一个未完成的阻塞操作,如果此时调用了任何函数(不管此函数是否引用了该套接字或任何其它套接字),此函数将以错误码WSAEINPROGRESS返回。

 

WSAEINTR                            (10004)             Interrupted function call.

阻塞操作被函数WSACancelBlockingCall ()调用所中断。

 

WSAEINVAL                           (10022)             Invalid argument.

提供了非法参数(例如,在使用setsockopt()函数时指定了非法的level)。在一些实例中,它也可能与套接字的当前状态相关,例如,在套接字没有使用listen()使其处于监听时调用accept()函数。

 

WSAEISCONN                        (10056)             Socket is already connected.

连接请求发生在已经连接的套接字上。一些实现对于在已连接SOCK_DGRAM套接字上使用sendto()函数的情况也返回此错误(对于SOCK_STREAM套接字,sendto()函数的to参数被忽略),尽管其它一些实现将此操作视为合法事件。

 

WSAEMFILE                          (10024)             Too many open files.

打开了太多的套接字。不管是对整个系统还是每一进程或线程,Windows Sockets实现都可能有一个最大可用的套接字句柄数。

 

WSAEMSGSIZE                      (10040)             Message too long.

在数据报套接字上发送的一个消息大于内部消息缓冲区或一些其它网络限制,或者是用来接受数据报的缓冲区小于数据报本身。

 

WSAENETDOWN                    (10050)             Network is down.

套接字操作遇到一个不活动的网络。此错误可能指示网络系统(例如WinSock DLL 运行的协议栈)、网络接口或本地网络本身发生了一个 严重 的失败。

 

WSAENETRESET                   (10052)             Network dropped connection on reset.

在操作正在进行时连接因“keep-alive”检测到失败而中断。也可能由setsockopt()函数返回,如果试图使用它在一个已经失败的连接上设置SO_KEEPALIVE

 

WSAENETUNREACH              (10051)             Network is unreachable.

试图和一个无法到达的网络进行套接字操作。它常常意味着本地软件不知道到达远程主机的路由。

 

WSAENOBUFS                        (10055)             No buffer space available.

由于系统缺乏足够的缓冲区空间,或因为队列已满,在套接字上的操作无法执行。

 

WSAENOPROTOOPT             (10042)             Bad protocol option.

getsockopt()setsockopt()调用中,指定了一个未知的、非法的或不支持的选项或层(level)。

 

WSAENOTCONN                    (10057)             Socket is not connected.

因为套接字没有连接,发送或接收数据的请求不被允许,或者是使用sendto()函数在数据报套接字上发送时没有提供地址。任何其它类型的操作也可以返回此错误,例如,使用setsockopt()函数在一个已重置的连接上设置SO_KEEPALIVE

 

WSAENOTSOCK                    (10038)             Socket operation on non-socket.

操作试图不是在套接字上进行。它可能是套接字句柄参数没有引用到一个合法套接字,或者是调用select()函数时,一个fd_set中的成员不合法。

 

WSAEOPNOTSUPP                (10045)             Operation not supported.

对于引用的对象的类型来说,试图进行的操作不支持。通常它发生在套接字不支持此操作的套接字描述符上,例如,试图在数据报套接字上接收连接。

 

WSAEPFNOSUPPORT            (10046)             Protocol family not supported.

协议簇没有在系统中配置或没有支持它的实现存在。它与WSAEAFNOSUPPORT有些微的不同,但在绝大多数情况下是可互换的,返回这两个错误的所有Windows Sockets函数的说明见WSAEAFNOSUPPORT的描述。

 

WSAEPROCLIM                     (10067)             Too many processes.

Windows Sockets实现可能限制同时使用它的应用程序的数量,如果达到此限制,WSAStartup()函数可能因此错误失败。

 

WSAEPROTONOSUPPORT     (10043)             Protocol not supported.

请求的协议没有在系统中配置或没有支持它的实现存在。例如,socket()调用请求一个SOCK_DGRAM套接字,但指定的是流协议。

 

WSAEPROTOTYPE                (10041)             Protocol wrong type for socket.

socket()函数调用中指定的协议不支持请求的套接字类型的语义。例如,ARPA Internet UDP协议不能和SOCK_STREAM套接字类型一同指定。

 

WSAESHUTDOWN                 (10058)             Cannot send after socket shutdown.

因为套接字在相应方向上已经被先前的shutdown()调用关闭,因此该方向上的发送或接收请求不被允许。通过调用shutdown()函数来请求对套接字的部分关闭,它发送一个信号来停止发送或接收或双向操作。

 

WSAESOCKTNOSUPPORT    (10044)             Socket type not supported.

不支持在此地址族中指定的套接字类型。例如,socket()调用中选择了可选的套接字类型SOCK_RAW,但是实现却根本不支持SOCK_RAW类型的套接字。

 

WSAETIMEDOUT                   (10060)             Connection timed out.

连接请求因被连接方在一个时间周期内不能正确响应而失败,或已经建立的连接因被连接的主机不能响应而失败。

 

WSATYPE_NOT_FOUND        (10109)             Class type not found

     指定的类没有找到。

 

WSAEWOULDBLOCK           (10035)             Resource temporarily unavailable.

此错误由在非阻塞套接字上不能立即完成的操作返回,例如,当套接字上没有排队数据可读时调用了recv()函数。此错误不是严重错误,相应操作应该稍后重试。对于在非阻塞SOCK_STREAM套接字上调用connect()函数来说,报告WSAEWOULDBLOCK是正常的,因为建立一个连接必须花费一些时间。

 

WSAHOST_NOT_FOUND        (11001)             Host not found.

主机未知。此名字不是一个正式主机名,也不是一个别名,它不能在查询的数据库中找到。此错误也可能在协议和服务查询中返回,它意味着指定的名字不能在相关数据库中找到。

 

WSA_INVALID_HANDLE        (OS dependent) Specified event object handle is invalid.

应用程序试图使用一个事件对象,但指定的句柄非法。

 

WSA_INVALID_PARAMETER (OS dependent) One or more parameters are invalid.

应用程序使用了一个直接映射到Win32函数的WinSock函数,而Win32函数指示一个或多个参数有问题。

 

WSAINVALIDPROCTABLE    (OS dependent)      Invalid procedure table from service provider.

服务提供者返回了一个假的WS2_32.DLL程序(procedure)表。这通常是由一个或多个函数指针为空引起。

 

WSAINVALIDPROVIDER        (OS dependent)      Invalid service provider version number.

     服务提供者返回一个不同于2.2的版本号。

 

WSA_IO_INCOMPLETE         (OS dependent) Overlapped I/O event object not in signaled state.

应用程序试图检测一个没有完成的重叠操作的状态。应用程序使用函数WSAGetOverlappedResult()(参数fWait设置为false)以轮询模式检测一个重叠操作是否完成时将得到此错误码,除非该操作已经完成。

 

WSA_IO_PENDING                 (OS dependent) Overlapped operations will complete later.

应用程序已经初始化了一个不能立即完成的重叠操作。当稍后此操作完成时将有完成指示。

 

WSA_NOT_ENOUGH_MEMORY  (OS dependent)       Insufficient memory available.

应用程序使用了一个直接映射到Win32函数的WinSock函数,而Win32函数指示缺乏必要的内存资源。

 

WSANOTINITIALISED           (10093)             Successful WSAStartup() not yet performed.

应用程序没有调用WSAStartup()函数,或函数WSAStartup()调用失败了。应用程序可能访问了不属于当前活动任务的套接字(例如试图在任务间共享套接字),或调用了过多的WSACleanup()函数。

 

WSANO_DATA                        (11004)             Valid name, no data record of requested type.

请求的名字合法并且在数据库中找到了,但它没有正确的关联数据用于解析。此错误的通常例子是主机名到地址(使用gethostbyname()WSAAsyncGetHostByName()函数)的DNS转换请求,返回了MXMail Exchanger)记录但是没有AAddress)记录,它指示主机本身是存在的,但是不能直接到达。

 

WSANO_RECOVERY              (11003)             This is a non-recoverable error.

此错误码指示在数据库查找时发生了某种不可恢复错误。它可能是因为数据库文件(如BSD兼容的HOSTSSERVICESPROTOCOLS文件)找不到,或DNS请求应服务器有严重错误而返回。

 

WSAPROVIDERFAILEDINIT  (OS dependent)      Unable to initialize a service provider.

服务提供者的DLL不能加载(LoadLibrary()失败)或提供者的WSPStartup/NSPStartup函数失败。

 

WSASYSCALLFAILURE         (OS dependent)      System call failure..

当一个不应该失败的系统调用失败时返回。例如,如果WaitForMultipleObjects()调用失败,或注册的API不能够利用协议/名字空间目录。

 

WSASYSNOTREADY              (10091)             Network subsystem is unavailable.

此错误由WSAStartup()函数返回,它表示此时Windows Sockets实现因底层用来提供网络服务的系统不可用。用户应该检查:   是否有合适的Windows Sockets DLL文件在当前路径中。是否同时使用了多个WinSock实现。如果有多于一个的WINSOCK DLL在系统中,必须确保搜索路径中第一个WINSOCK DLL文件是当前加载的网络子系统所需要的。查看WinSock实现的文档以确保所有必须的部件都正确地安装并配置好了。

 

WSATRY_AGAIN                    (11002)             Non-authoritative host not found.

此错误通常是在主机名解析时的临时错误,它意味着本地服务器没有从授权服务器接收到一个响应。稍后的重试可能会获得成功。

 

WSAVERNOTSUPPORTED     (10092)             WINSOCK.DLL version out of range.

当前的WinSock实现不支持应用程序指定的Windows Sockets规范版本。检查是否有旧的Windows Sockets DLL文件正在被访问。

 

WSAEDISCON                        (10101)             Graceful shutdown in progress.

WSARecv()WSARecvFrom()函数返回,指示远程方已经初始化了一个“雅致”的关闭序列。

 

WSA_OPERATION_ABORTED   (OS dependent) Overlapped operation aborted.

     因为套接字的关闭,一个重叠操作被取消,或是执行了WSAIoctl()函数的SIO_FLUSH命令。

 

文章原地址:http://dev.21tx.com/2004/09/30/11685.html

<?xml version="1.0" encoding="utf-8"?> <resources> <string name="error__6">Operation failed. Please try later.</string> <string name="error_263">No default tenant found, please contact service provider.</string> <string name="error__107">Failed to connect to the camera. Try again later.</string> <string name="error_004">Invalid email address.</string> <string name="error_006">Incorrect mobile number.</string> <string name="error_009">The phone number has already been registered once, please use another number or use this number to login.</string> <string name="error_010">Incorrect verification code.</string> <string name="error_011">The email address has been bound.</string> <string name="error_012">Failed to log in to the app. Please log in again.</string> <string name="error_018">Invalid application ID.</string> <string name="error_019">Invalid operation.</string> <string name="error_024">Invalid plug-in.</string> <string name="error_025">Operation failed. Please try later.</string> <string name="error_026">Plug-in does not exist.</string> <string name="error_027">Failed to log in to the app. Please log in again.</string> <string name="error_030">The terminal has been bound.</string> <string name="error_031">Operation failed. Please try later.</string> <string name="error_032">The terminal does not bind to this account.</string> <string name="error_033">Terminals are being operated by other users.</string> <string name="error_034">Operation failed. Please try later.</string> <string name="error_035">Failed to obtain the application list.</string> <string name="error_036">Failed to obtain the application image.</string> <string name="error_037">Failed to obtain the application version.</string> <string name="error_038">Failed to obtain the Wi-Fi coverage information.</string> <string name="error_040">The email address has not been bound to an account.</string> <string name="error_042">Operation failed. Please try later.</string> <string name="error_044">Operation failed. Please try later.</string> <string name="error_048">Operation failed. Please try later.</string> <string name="error_050">Operation failed. Please try later.</string> <string name="error_051">Operation failed. Please try later.</string> <string name="error_056">Configuration page query failed.</string> <string name="error_057">Operation failed. Please try later.</string> <string name="error_058">Plug-in list query failed.</string> <string name="error_059">Plug-in image query failed.</string> <string name="error_060">Operation failed. Please try later.</string> <string name="error_061">Operation failed. Please try later.</string> <string name="error_063">Invalid broadband account.</string> <string name="error_064">Operation failed. Please try later.</string> <string name="error_066">Invalid account type.</string> <string name="error_067">The password cannot be empty.</string> <string name="error_068">The confirmation password cannot be empty.</string> <string name="error_069">The account cannot be empty.</string> <string name="error_070">Incorrect PPPoE account.</string> <string name="error_072">The cloud account is empty.</string> <string name="error_073">Incorrect cloud account type.</string> <string name="error_075">The cloud account is registered.</string> <string name="error_076">The cloud account does not exist.</string> <string name="error_077">You have not bound any broadband account or gateway.</string> <string name="error_078">The MAC address of the device is not registered to the cloud platform. </string> <string name="error_081">The current binding relationship does not exist.</string> <string name="error_082">The user account does not exist.</string> <string name="error_087">Binding failed, No broadband account.</string> <string name="error_093">You have not bound any broadband account.</string> <string name="error_094">The number of gateways to be bound has reached the maximum. New gateways cannot be bound.</string> <string name="error_097">Broadband account verification is not currently available.</string> <string name="error_098">The device already exists.</string> <string name="error_099">The Wi-Fi SSID already exists.</string> <string name="error_100">The Wi-Fi SSID is empty.</string> <string name="error_101">The account is added.</string> <string name="error_103">The password will expire soon.</string> <string name="error_105">The user account is locked.</string> <string name="error_106">User login failed.</string> <string name="error_107">Exceeded the number limit of accounts that can be logged in at the same time.</string> <string name="error_108">Password complexity is invalid.</string> <string name="error_110">Incorrect mobile phone type.</string> <string name="error_111">The mobile phone version is empty.</string> <string name="error_112">Exceeded the password resetting limit in 24 hours.</string> <string name="error_113">Exceeded the number limit of security question attempts. The password resetting is locked.</string> <string name="error_114">Incorrect answer to the security question.</string> <string name="error_115">Invalid parameter for the security question.</string> <string name="error_116">Incorrect old password.</string> <string name="error_117">No plug-in version.</string> <string name="error_118">Incorrect password.</string> <string name="error_121">Invalid order number.</string> <string name="error_122">WO cloud account has been registered.</string> <string name="error_123">WO cloud account does not exist.</string> <string name="error_124">WO cloud client authentication failed.</string> <string name="error_133">Failed to join.</string> <string name="error_139">Only administrators have this permission.</string> <string name="error_144">The log file size exceeds 5 MB and cannot be uploaded.</string> <string name="error_145">Plug-in already exists.</string> <string name="error_146">Plug-in version already exists.</string> <string name="error_150">The log switch has been enabled.</string> <string name="error_151">The log switch has been disabled.</string> <string name="error_152">Failed to query third-party authentication information.</string> <string name="error_153">Failed to forward plug-in third-party authentication information.</string> <string name="error_154">Duplicate room name.</string> <string name="error_155">The message template cannot be left empty.</string> <string name="error_156">The message template does not exist.</string> <string name="error_157">The mapping SMS template does not exist.</string> <string name="error_158">The SMS gateway is unavailable.</string> <string name="error_159">The plug-in service name is left empty or does not exist.</string> <string name="error_160">The plug-in service code is left empty or does not exist.</string> <string name="error_161">The plug-in random code is left blank or does not exist.</string> <string name="error_162">The mobile number cannot be left empty.</string> <string name="error_163">Failed to connect to the SMS gateway.</string> <string name="error_164">Failed to bind the SMS gateway.</string> <string name="error_165">Failed to send the SMS message.</string> <string name="error_166">SMS sending timed out.</string> <string name="error_171">The email address for receiving an authentication code is not the email address of the administrator.</string> <string name="error_172">The format of the message notification switch is incorrect.</string> <string name="error_173">The user password of the storage service fails the verification.</string> <string name="error_174">Status of the gateway to which the user is bound is invalid.</string> <string name="error_175">The email server is not configured.</string> <string name="error_176">Failed to send the email.</string> <string name="error_184">Sender authentication on the email server failed.</string> <string name="error_185">Incorrect email address.</string> <string name="error_186">Operation failed. Please try later.</string> <string name="error_187">Operation failed. Please try later.</string> <string name="error_189">You do not have the permission to access the gateway.</string> <string name="error_192">This type of message is not currently supported by the SMS gateway.</string> <string name="error_193">Sessiontimeout must be specified if the speed-up interface oper_type is set to 0.</string> <string name="error_196">Image size too large.</string> <string name="error_197">Incorrect image format.</string> <string name="error_198">The plug-in software version is not available.</string> <string name="error_199">Mandatory parameter symbolicName not found.</string> <string name="error_200">The plug-in record is empty.</string> <string name="error_204">BSS is not configured.</string> <string name="error_205">Failed to register the cloud account.</string> <string name="error_209">Mandatory parameter #{field} is not carried or is left empty.</string> <string name="error_210">Invalid request format.</string> <string name="error_211">The password has expired.</string> <string name="error_212">The user is blocked.</string> <string name="error_213">The MAC address is not bound.</string> <string name="error_215">You have not purchased such type of device.</string> <string name="error_216">Failed to identify the device type.</string> <string name="error_217">The number of devices of this type exceeds the maximum allowed by the package.</string> <string name="error_218">The package has not been activated.</string> <string name="error_222">Cloud storage has not been configured on the web page.</string> <string name="error_226">The account is not bound to a mobile number.</string> <string name="error_227">The account is not bound to an email address.</string> <string name="error_228">The cloud storage parameters cannot be left empty.</string> <string name="error_230">Failed to create the temporary Amazon Cloud certificate.</string> <string name="error_231">The verification code has expired.</string> <string name="error_232">No profile image has been uploaded for the user.</string> <string name="error_233">The application has not been purchased.</string> <string name="error_234">Incorrect cloud storage configuration.</string> <string name="error_236">Failed to obtain the cloud token.</string> <string name="error_237">Non-current administrator to create sub-accounts</string> <string name="error_244">The mobile number cannot be used for login.</string> <string name="error_245">The email address cannot be used for login.</string> <string name="error_246">The account cannot be modified repeatedly.</string> <string name="error_248">The plug-in is the latest version.</string> <string name="error_249">The login has expired.</string> <string name="error_250">The plug-in is the latest version.</string> <string name="error_251">Users with no service provisioned cannot bind a gateway.</string> <string name="error_252">The mobile number bound to the new administrator does not match the number segment specified by the carrier.</string> <string name="error_253">The mobile phone number bound to the new administrator is not used.</string> <string name="error_254">The mobile phone number bound to the new administrator has been used.</string> <string name="error_256">Your account has been disabled.</string> <string name="error_1018">Your password has been reset, please set a new password on the cloud platform</string> <string name="error_30000001">Operation failed. Please try later.</string> <string name="error_30000101">The account already exists.</string> <string name="error_30000102">The account does not exist.</string> <string name="error_30000103">The new account already exists.</string> <string name="error_30000104">The mobile number already exists.</string> <string name="error_30000105">The email address already exists.</string> <string name="error_30000106">The package does not exist.</string> <string name="error_30000107">Product ID{#{field}} does not exist.</string> <string name="error_30000108">Incorrect email address format.</string> <string name="error_30000109">The password does not meet the complexity requirements. Enter a correct one.</string> <string name="error_30000110">The account is not an administrator account.</string> <string name="error_30000111">No gateway has been bound for the account.</string> <string name="error_30000112">Multiple gateways have been bound for the account.</string> <string name="error_30000113">The gateway bound to this account has been enabled for remote management.</string> <string name="error_30000114">The gateway bound to this account has suspended remote management</string> <string name="error_30000115">The package is not specified.</string> <string name="error_30000116">Failed to delete the storage service file.</string> <string name="error_30000121">Unknown northbound bundle operation.</string> <string name="error_30000122">The plug-in software version is not found.</string> <string name="error_30000123">The plug-in software version already exists.</string> <string name="error_30000124">Mandatory parameter symbolicName is not specified.</string> <string name="error_30000125">The plug-in record is empty.</string> <string name="error_30000126">The plug-in has been bound to an app.</string> <string name="error_30000127">The plug-in does not exist.</string> <string name="error_30000128">The format of the mobile number is incorrect.</string> <string name="error_30000129">A new account cannot be the same as the old account.</string> <string name="error_30000130">The password must be different from previous passwords.</string> <string name="error__1004">The service package is not available for use.</string> <string name="error__1008">The entered broadband account is inconsistent with the one used for dial-up access.</string> <string name="error__1011">The user is offline.</string> <string name="error__1012">Subscribed services have expired.</string> <string name="error__1014">The IP address is outside the IP address range that has access to smart speed-up.</string> <string name="error__1015">The remaining quota is zero.</string> <string name="error_2002">The room does not exist.</string> <string name="error_2003">The device SN does not exist.</string> <string name="error_2004">The device is already added.</string> <string name="error_2005">No such device service is purchased.</string> <string name="error_2006">The package is not activated.</string> <string name="error_2007">The number of devices exceeds the limit of package.</string> <string name="error_2008">The device name already exists.</string> <string name="error_10100502">The service is invalid.</string> <string name="error_10100503">The service has ceased.</string> <string name="error_10100505">The service package does not exist.</string> <string name="error_10100508">BOD services do not support accumulation.</string> <string name="error_10100509">No basic-bandwidth information is available to calculate the amount of additional BOD bandwidth required.</string> <string name="error_10100601">The service is not subscribed.</string> <string name="error_10100602">The service is in used.</string> <string name="error_10100604">The service is not in use and the acceleration does not need to be stopped.</string> <string name="error_999">Operation failed. Please try later.</string> <string name="error_999108">Operation failed. Please try later.</string> <string name="error_999100">Service cannot parse XML-request and detect necessary fields</string> <string name="error_999101">Account for requested login or contract number is not found (for methods like balance checking)</string> <string name="error_999102">The contract attachment of the requested number is not found.</string> <string name="error_999103">Service with the requested number is not found</string> <string name="error_999104">Wrong phone number format</string> <string name="error_999105">Wrong email format</string> <string name="error_999106">Password doesn\'t meet the requirements (too short, etc)</string> <string name="error_999107">Error of internal account identification</string> <string name="error_999200">Method is not supported or not currently available</string> <string name="error_999202">BSS returns an error indicating that changing the mobile phone number failed.</string> <string name="error_999203">BSS returns an error indicating that changing the email address failed.</string> <string name="error_999300">Error during internal request processing in billing system (it will be returned XML-structure with details of the error)</string> <string name="error_network_err">Connection timed out. Check your network connection.</string> <string name="error_40000002">The length exceeds the maximum limit.</string> <string name="error_40000005">The parameter value exceeds the maximum value.</string> <string name="error_40000006">The parameter value is less than the minimum value.</string> <string name="error_80010001">The scene name already exists.</string> <string name="error_80010002">The scene name is empty.</string> <string name="error_80010003">The scene contains non-existing or deleted devices.</string> <string name="error_80010004">The scene name does not exist.</string> <string name="error_80000001">The plug-in name is empty.</string> <string name="error_80000002">The data flag is empty.</string> <string name="error_80010005">The action of the device is empty.</string> <string name="error_80010006">The device type does not exist.</string> <string name="error_80011001">The app name does not exist.</string> <string name="error_80011002">The operation name is empty.</string> <string name="error_80011003">The service name does not exist.</string> <string name="error_80012001">The camera password is incorrect or locked.</string> <string name="error_80013001">More rooms are created than allowed.</string> <string name="error_80010007">Incorrect time format in the scheduled scene.</string> <string name="error_80010008">The action name is empty.</string> <string name="error_80010009">Name of trigger condition is empty.</string> <string name="error_1013">The MAC address of your gateway does not exist on the server.</string> <string name="logo_homeGatewayService.token.invalid">Your login has expired.</string> <string name="error_1014">The number of verification codes sent in your account has reached the maximum. Please try again tomorrow.</string> <string name="error_0x02163dc3">The number of same characters in a row in the password has exceeded the maximum.</string> <string name="error_0x02163dcc">Failed to input the correct old password.</string> <string name="error_0x02163dc1">The password does not meet requirements.</string> <string name="error_0x02163dc2">The length of the password does not meet requirements.</string> <string name="error_0x021639b8">The new password must contain at least two characters that are not used in the old password.</string> <string name="error_0x02163dc4">The password does not comply with the repetition policy.</string> <string name="error_0x02163dc6">The operation does not comply with the minimum modification time interval.</string> <string name="error_0035014004">Password entered incorrectly too many times, please wait %1$s minutes and try again.</string> <string name="error_276">The mobile number has been registered with another broadband service provider and cannot be invited.</string> <string name="error_across_tenant">The mobile number has been registered with another broadband service provider, so you cannot invite it.</string> <string name="error__11">Operation failed. Please try later.</string> <string name="error__12">Operation failed. Please try later.</string> <string name="error_HomeGatewayService_parameter_invalid">Incorrect request parameter.</string> <string name="error_HomeGatewayService_cmdtype_invalid">The current platform version does not support this function.</string> <string name="error_HomeGatewayService_service_invalid">Server error.</string> <string name="error_HomeGatewayService_homegateway_no_permission">You do not have permission to manage the gateway.</string> <string name="error_281">Failed to send the SMS message. Please contact your broadband service provider.</string> <string name="error_282">The server fails to send an SMS message because the mobile number is invalid.</string> <string name="error_283">The server fails to send an SMS message because the mobile number is invalid.</string> <string name="error_284">The server is busy sending SMS messages. Please try again later.</string> <string name="error_285">The server is busy sending SMS messages. Please try again later.</string> <string name="error_286">The server fails to send the SMS message because the content is invalid.</string> <string name="error_287">The server fails to send an SMS message because the number is in the blacklist.</string> <string name="error_288">The SMS message sent by the server contains sensitive words. Change your gateway remarks and try again.</string> <string name="error_0">Operation successful.</string> <string name="error_7">The gateway is busy and cannot process the current request. Try again later.</string> <string name="error__1">Operation failed. Please try later.</string> <string name="error__2">Network request timed out.</string> <string name="error__36">The Wi-Fi service has been disabled.</string> <string name="error__100">Failed to assign transit server port. Try again</string> <string name="error__101">Failed to connect to the transit server. Check if the server is online.</string> <string name="error__105">Failed to obtain the video service address of the camera</string> <string name="error__108">User authentication failed</string> <string name="error__202">When MLO is enabled, the authentication mode must be WPA2, WPA3, or WPA2/WPA3.</string> <string name="error_001">Duplicate username.</string> <string name="error_002">Passwords don’t match.</string> <string name="error_003">Incorrect username or password.</string> <string name="error_005">The length of the password does not meet requirements.</string> <string name="error_007">The username cannot be empty.</string> <string name="error_008">Duplicate nickname.</string> <string name="error_013">Incorrect username or password.</string> <string name="error_014">Exceeded the maximum number of terminals bound to the current account.</string> <string name="error_015">Exceeded the maximum number of accounts bound to this terminal.</string> <string name="error_016">No smart ONT has been bound</string> <string name="error_020">The gateway is offline.</string> <string name="error_021">You do not have the permission to access the gateway.</string> <string name="error_022">The gateway is not registered.</string> <string name="error_023">The username does not exist.</string> <string name="error_029">No terminal is bound to this account.</string> <string name="error_039">The mobile number has not been bound to an account.</string> <string name="error_041">Failed to modify the password: The old password is entered incorrectly.</string> <string name="error_043">The gateway connection timed out. Try again later or check whether the gateway network is connected.</string> <string name="error_045">Operation failed. Please try later.</string> <string name="error_046">Operation failed. Please try later.</string> <string name="error_047">Failed to obtain the device control list.</string> <string name="error_049">Exceeded the maximum number of controllable devices.</string> <string name="error_052">The gateway is not registered.</string> <string name="error_053">Device control is not supported.</string> <string name="error_054">Operation failed. Please try later.</string> <string name="error_055">Unknown error occurred on the device control template.</string> <string name="error_065">Problem description cannot be empty.</string> <string name="error_071">Not a smart gateway.</string> <string name="error_079">Operation failed: the gateway has been unbound.</string> <string name="error_080">Operation failed: the current account has not joined.</string> <string name="error_083">Operation failed. Please try later.</string> <string name="error_084">A non-invite user cannot modify the remarks.</string> <string name="error_085">Unbinding failed. Please try again later.</string> <string name="error_086">Devices exist in the room.</string> <string name="error_088">This app does not support non-smart gateways.</string> <string name="error_089">Binding failed. Please try again later.</string> <string name="error_090">Binding failed. Please try again later.</string> <string name="error_091">Binding failed. Please try again later.</string> <string name="error_092">The number of invited users has exceeded the upper limit.</string> <string name="error_095">Deletion failed. The last user cannot be deleted.</string> <string name="error_096">The list of network users to be deleted is empty.</string> <string name="error_102">The new password cannot be the same as any previous password.</string> <string name="error_104">The password has expired.</string> <string name="error_109">The greeting message is empty.</string> <string name="error_119">The room name cannot be empty.</string> <string name="error_120">The room ID cannot be empty.</string> <string name="error_125">The username does not meet the complexity requirements. Enter a correct one.</string> <string name="error_126">The username cannot be empty.</string> <string name="error_127">The username does not meet the complexity requirements. Enter a correct one.</string> <string name="error_128">No mobile number is bound.</string> <string name="error_129">This mobile number is not a administrator account.</string> <string name="error_130">The mobile number must be a Bahraini number.</string> <string name="error_131">The mobile number has been bound.</string> <string name="error_132">No phone number is bound to the current account.</string> <string name="error_134">Administrators cannot leave.</string> <string name="error_135">The mobile number is not bound to any account.</string> <string name="error_136">The login has expired.</string> <string name="error_140">The device has been updated to the latest version.</string> <string name="error_141">No new version is available.</string> <string name="error_143">Incorrect log file format.</string> <string name="error_147">The gateway is being upgraded.</string> <string name="error_148">The phone number has already been registered once, please use another number or use this number to login.</string> <string name="error_149">Duplicate room name.</string> <string name="error_167">Operation failed. Please try later.</string> <string name="error_168">Starting the plug-in…</string> <string name="error_169">Stopping the plug-in…</string> <string name="error_170">Uninstalling the plug-in…</string> <string name="error_188">The gateway does not exist.</string> <string name="error_190">You do not have access to this gateway.</string> <string name="error_191">The message push type is empty or of an incorrect format.</string> <string name="error_194">Operation failed. Please try later.</string> <string name="error_195">You cannot invite other network members to join.</string> <string name="error_LHConsumerService_login_accountRoleMismatch">Members from other enterprises are not allowed.</string> <string name="error_LHConsumerService_bindGroup_exceedMaxBindGroupNum">Members from other enterprises are not allowed.</string> <string name="error_201">Failed to check the remaining balance.</string> <string name="error_202">Failed to change the mobile number.</string> <string name="error_203">Failed to change the email address.</string> <string name="error_214">Incorrect addedDeviceList format.</string> <string name="error_219">The password cannot be the same as the username or the username in reverse.</string> <string name="error_220">You do not have the administrative permission.</string> <string name="error_221">Failed to uninstall all the plug-ins of the home gateway.</string> <string name="error_224">The new gateway is not registered.</string> <string name="error_225">The new home gateway has been bound.</string> <string name="error_238">Your account has not been bound with a mobile number or email address. The password cannot be retrieved through self service. You are advised to contact your administrator to retrieve the password.</string> <string name="error_239">The mobile number is bound to multiple accounts.</string> <string name="error_240">The email address is bound to multiple accounts.</string> <string name="error_247">Anonymous binding information cannot be queried by using a mobile number or an email address.</string> <string name="error_255">The account has been bound to a gateway, and cannot be bound to another one.</string> <string name="error_272">Incorrect username or password.</string> <string name="error_1002">The interval between requests for sending verification codes is too short.</string> <string name="error_30000117">The home gateway MAC address does not exist.</string> <string name="error_30000118">The home gateway is offline.</string> <string name="error_30000119">The home gateway plug-in does not exist.</string> <string name="error_30000120">The plug-in is not installed or not upgraded on the home gateway.</string> <string name="error__1013">The MAC address (XXX) of your gateway does not exist on the server.</string> <string name="error_2001">The input parameter is empty.</string> <string name="error_40000001">The parameter contains unsupported special characters.</string> <string name="error_40000003">The length is less than the minimum limit.</string> <string name="error_40000004">The parameter is not a numeric type.</string> <string name="error_40000007">Invalid IP address.</string> <string name="net_conn_failed">Connection failed.</string> <string name="error__3">Connection failed.</string> <string name="error__4">The gateway is busy and cannot process the current request. Try again later.</string> <string name="error__5">Operation failed. Please try later.</string> <string name="error__7">Operation failed. Please try later.</string> <string name="error__8">Not supported by the gateway.</string> <string name="error__9">Operation failed. Please try later.</string> <string name="error__10">Your login has expired. Please log in again.</string> <string name="error_280">Failed to send the SMS message. Please try again later.</string> <string name="error_300">The current server version does not support user name registration.</string> <string name="error__102">Camera offline or camera connection failed. Check if the camera is powered on.</string> <string name="error__104">Camera video service address illegal, please report impaired</string> <string name="error__106">Gateway cannot connect to the transit server. Check if the server is online.</string> <string name="error__200">Reached the upper limit.</string> <string name="error__201">When MLO is enabled, the working mode must be 802.11be.</string> <string name="error__203">Saving Wi-Fi settings. Please wait.</string> <string name="error__204">Incorrect request parameter.</string> <string name="error__205">The Wi-Fi frequency band is not enabled. Enable it first.</string> <string name="error__301">Fails to play the real-time video of the camera. Failed to connect to the gateway locally.</string> <string name="error__330">Application control is not enabled. Please enable it first.</string> <string name="error__331">The number of application control policies has reached the upper limit.</string> <string name="error__332">The app control rule does not exist.</string> <string name="error__622">The rate limit periods cannot overlap with each other.</string> <string name="error_028">Your account has been used for login on another device. If this was done without your knowledge, your account and password may have been compromised. Choose Settings > Account And Security to change your account password.</string> <string name="error_2009">Failed to query the package status.</string> <string name="error__99999">Operation failed. Please try later.</string> <string name="error_1017">The MAC address cannot be empty.</string> <string name="error_licence_expire">Licence expired, please contact service provider.</string> <string name="LHConsumerService.bindLocalAccount.hasFamily">The account is already in a family.</string> <string name="LHConsumerService.bindLocalAccount.bound">Already bound to another account.</string> <string name="LHConsumerService.weakvalue.error">The password is too simple.</string> <string name="error_LHConsumerService_feedback_daylimit">The number of problems you reported has reached the upper limit. Try again 24 hours later.</string> <string name="error_306">Failed to send the verification code.The possible cause is that the mobile number format is incorrect or the mobile number has been bound.</string> <string name="error_307">Failed to send the verification code.The possible cause is that the email address format is incorrect or the email address has been bound.</string> <string name="error_308">Failed to send the verification code.The possible cause is that the mobile number format is incorrect or the mobile number is not bound.</string> <string name="error_309">Failed to send the verification code.The possible cause is that the email address format is incorrect or the email address is not bound.</string> <string name="error_310">The client IP address is locked,please try again later.</string> <string name="error_311">The current version does not support multi-factor authentication. Contact the administrator to disable multi-factor authentication.</string> <string name="error__340">The portal function has been enabled. The speed limit cannot be configured. To set the rate limit, disable Portal authentication on the web management page of the gateway.</string> <string name="error_AppSdk_notInitialized">Failed to initialize the app. Please log in again.</string> <string name="error_log_collect_offline">Device is offline</string> <string name="error_log_collect_conflict">Another collection task of the device is in progress.</string> <string name="error_log_collect_failed">Log collection failed</string> <string name="LHConsumerService.domainMigration.notSupportBinding">The server has been switched. Please switch to the corresponding region and register again.</string> <string name="error__41">Failed to set the 5G Wi-Fi because it has been locked. Contact your carrier to enable it first.</string> <string name="error__14">The same Wi-Fi SSID already exists in the current frequency band.</string> <string name="BindGateway_101">You have joined a family. Please refresh the home page and view it.</string> <string name="error_third_platform_user">Third-party users exist, unbinding failed.</string> </resources>
06-11
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值