Ubuntu terminator 多窗口终端的快捷键

本文详细介绍了Terminator多窗口终端的各种快捷键操作,包括开新窗口、调整窗口大小、切换窗口、复制粘贴等功能,帮助用户提高工作效率。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

KEYBINDINGS 
The following keybindings can be used to control Terminator: 

Ctrl+Shift+O 
Split terminals Horizontally.(上下开新窗口) 

Ctrl+Shift+E 
Split terminals Vertically.(垂直开新窗口) 

Ctrl+Shift+Right 
Move parent dragbar Right.(放大当前窗口 向右) 

Ctrl+Shift+Left 
Move parent dragbar Left. 

Ctrl+Shift+Up 
Move parent dragbar Up. 

Ctrl+Shift+Down 
Move parent dragbar Down. 

Ctrl+Shift+S 
Hide/Show Scrollbar.(隐藏滚动条) 

Ctrl+Shift+F 
Search within terminal scrollback 

Ctrl+Shift+N or Ctrl+Tab 
Move to next terminal within the same tab, use Ctrl+PageDown to move to the next tab. If cycle_term_tab is False, cycle within the same tab will be disabled 

Ctrl+Shift+P or Ctrl+Shift+Tab 
Move to previous terminal within the same tab, use Ctrl+PageUp to move to the previous tab. If cycle_term_tab is False, cycle within the same tab will be disabled 

Alt+Up 
Move to the terminal above the current one.(切换当前窗口) 

Alt+Down 
Move to the terminal below the current one. 

Alt+Left 
Move to the terminal left of the current one. 

Alt+Right 
Move to the terminal right of the current one. 

Ctrl+Shift+C 
Copy selected text to clipboard 

Ctrl+Shift+V 
Paste clipboard text 

Ctrl+Shift+W 
Close the current terminal. 

Ctrl+Shift+Q 
Quits Terminator 

Ctrl+Shift+X (最大化当前窗口) 
Toggle between showing all terminals and only showing the current one (maximise). 

Ctrl+Shift+Z 
Toggle between showing all terminals and only showing a scaled version of the current one (zoom). 

Ctrl+Shift+T 
Open new tab

Ctrl+Shift+Alt+T 
Open new tab at root level, if using extreme_tabs.

Ctrl+PageDown 
Move to next Tab

Ctrl+PageUp 
Move to previous Tab

Ctrl+Shift+PageDown 
Swap tab position with next Tab

Ctrl+Shift+PageUp 
Swap tab position with previous Tab

Ctrl+Shift+F 
Open buffer search bar to find substrings in the scrollback buffer. Hit Escape to cancel.

Ctrl+Plus (+) 
Increase font size. Note: this may require you to press shift, depending on your keyboard

Ctrl+Minus (-) 
Decrease font size. Note: this may require you to press shift, depending on your keyboard

Ctrl+Zero (0) 
Restore font size to original setting.

F11 
Toggle fullscreen(放大当前窗口)

Ctrl+Shift+R 
Reset terminal state

Ctrl+Shift+G 
Reset terminal state and clear windowUbuntu terminator 多窗口终端的快捷键
<think>好的,用户想在Ubuntu 22.04中同时打开多个终端窗口。我需要先想想有哪些方法可以实现这一点。根据常见的Ubuntu操作,可能的方法包括使用快捷键终端内的分屏功能,或者安装第三方工具。 首先,快捷键是用户最方便的方式。我记得在Ubuntu中默认的终端是Gnome Terminal,通常使用Ctrl+Shift+T可以打开新的标签页,而Ctrl+Alt+T可以打开新窗口。不过用户可能想要多个窗口,所以可能需要多次使用Ctrl+Alt+T,或者使用标签页。但用户明确说想要多个窗口,可能需要指导他们如何调整设置或者使用不同的快捷键。 另外,终端软件本身可能有分屏功能。比如Gnome Terminal支持水平或垂直分屏,使用快捷键Ctrl+Shift+D和Ctrl+Shift+E。这个功能可能对用户有用,但需要确认他们使用的终端是否支持。此外,如果用户使用的是其他终端模拟器,比如Terminator,可能需要安装并配置。Terminator允许分割窗口,适合同时管理多个终端。 然后,用户可能不知道这些方法,需要一步步的指导。比如使用快捷键打开多个独立窗口,或者分屏。另外,用户可能遇到权限问题,比如安装Terminator需要sudo权限,但根据引用[2]中的内容,用户可能遇到sudoers的问题,这时候需要提醒用户确保他们的账户在sudoers文件中,或者参考相关解决方法。 还需要考虑用户是否习惯使用命令行,比如通过命令启动终端,比如输入gnome-terminal命令。如果用户想通过脚本一次性打开多个窗口,可以编写一个bash脚本,循环执行gnome-terminal命令。 另外,引用中提到的一些配置问题,比如安装软件时的依赖问题,可能需要用户先更新系统或添加仓库,如引用[3]中的sudo apt-get update等步骤。所以在指导安装Terminator时,可能需要提醒用户先更新软件源,再进行安装。 总结一下,可能的步骤包括: 1. 使用快捷键打开多个独立窗口(Ctrl+Alt+T多次)。 2. 在现有终端中使用标签页(Ctrl+Shift+T)或分屏(Ctrl+Shift+D/E)。 3. 安装Terminator,配置分屏。 4. 通过命令行或脚本启动多个终端实例。 需要检查这些方法的可行性,并确保在Ubuntu 22.04中有效。同时,注意引用中的内容,比如解决终端打不开的问题,可能需要用户先按照引用[2]中的方法修复终端,然后再尝试上述步骤。如果用户的终端原本有问题,可能需要先解决根本问题。 最后,生成相关问题,考虑用户可能的后续疑问,比如快捷键冲突、分屏调整、其他终端工具推荐等。</think>在Ubuntu 22.04中同时开启多个终端窗口的常用方法如下: ### 方法一:快捷键操作 1. **新建独立窗口** 按$Ctrl+Alt+T$组合键可快速启动新终端窗口,重复操作可打开多个独立窗口。若需自定义快捷键,可在「设置→键盘→快捷键」中调整[^1]。 2. **标签页模式** 在已打开的终端窗口中: - 新建标签页:$Ctrl+Shift+T$ - 切换标签页:$Ctrl+PgUp/PgDown$ ### 方法二:终端分屏功能 1. **水平分屏** 按$Ctrl+Shift+D$可将当前终端水平分割为两个独立工作区。 2. **垂直分屏** 按$Ctrl+Shift+E$可实现垂直分屏,支持同时查看多个终端界面。 ### 方法三:安装Terminator工具 ```bash # 安装Terminator(需sudo权限) sudo apt-get update && sudo apt-get install terminator ``` 安装后可通过右键菜单或快捷键$Ctrl+Shift+O$(水平分屏)、$Ctrl+Shift+E$(垂直分屏)实现多窗口管理,支持自定义布局[^3]。 ### 方法四:命令行批量启动 ```bash # 通过脚本一次性打开3个独立终端窗口 for i in {1..3}; do gnome-terminal & done ```
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值