UL 2849:2020 Standard for Electrical Systems for eBikes-电动自行车安规标准

本文详细解读了UL2849-2020标准,关注电动自行车的电力系统安全,涉及锂电池、BMS、控制器和充电设备的要求,确保电池电动汽车的合规性和安全性。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

ULCAN_UL2849-2020ElectricalSystemsforeBikes电动自行车电子系统.pdf-行业报告文档类资源-优快云下载ULCAN_UL2849-2020ElectricalSystemsforeBikes电更多下载资源、学习资料请访问优快云下载频道.https://download.youkuaiyun.com/download/std7879/85236152

最新完整英文版UL 2849:2020 Standard for Electrical Systems for eBikes-电动自行车安规标准, 本标准涵盖了由锂基可充电电池供电的电动自行车的电气系统。 电动自行车包括电动辅助循环(EPAC –踏板辅助)和非踏板辅助电动自行车。电气系统至少由驱动单元,电池,电池管理系统(BMS),互连导线和电源插座组成。 根据整个系统的应用和风险,还包括证明合规性所需的任何其他组件或系统。板外组件包括用于在充电过程中从eBike上卸下的电池充电的专用充电器,或用于在充电过程中。

UL 2849标准覆盖的产品为可充电锂电池供电的电动自行车,主要对电动自行车的电气系统进行安全性评估及测试,其中包含对电池管理系统(BMS)、控制器、电机以及软件功能安全进行全面系统的考核,同时对零部件(如:充电器、防火外壳、内部线束和接插端子等)提出严格的管控要求。

1 Scope
1.1 This Standard covers the electrical system of eBikes powered by a lithium-based, rechargeable
battery. EBikes include both Electrically Power Assisted Cycle (EPAC – pedal assist) and non-pedal assist eBikes.
1.2 Electrical systems as referenced in 1.1, may include onboard components and off board components of eBikes. As a minimum, the electrical system consists of the drive unit, battery, battery management system (BMS), interconnecting wiring, and power inlet. Any additional components or systems required to demonstrate compliance are included based on the overall system application and risk.
1.3 Off board components include dedicated chargers for charging batteries that are removed from the eBike during charging or dedicated chargers for charging batteries that are in place on the eBike during charging.
1.4 This Standard does not cover the mechanical structure of the eBike unless specified otherwise.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

std7879

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值