Python - EOF - Problem

最新推荐文章于 2024-10-22 22:39:43 发布
原创 最新推荐文章于 2024-10-22 22:39:43 发布 · 1k 阅读 · 1 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#Python3 #EOF #EOFError

博客提出一个问题，即编写一个Python程序，该程序要不断从标准输入读取行，直到引发EOFError，然后将这些行以倒序输出，用户可通过键入ctrl - D来表示输入结束。

Question:

Write a Python program that repeatedly reads lines from standard input until an EOFError is raised, and then outputs those lines in reverse order a user can indicate end of input by typing ctrl-D

Solution:
在这里插入图片描述

simplmax
关注
数据变换分解 | Python实现EOF经验正交函数分解时间序列模态分析
前程算法屋的博客
08-21 2703
数据变换分解 | Python实现EOF经验正交函数分解时间序列模态分析
Python基础--conda使用
qq_51641196的博客
12-26 561
miniconda下载，conda使用教程，配置conda镜像源，conda常用操作和配置镜像源_conda源配置-优快云博客一、安装miniconda下载二、配置系统环境变量三、验证：conda list四、配置下载源1. 查看默认源conda config --show-sources增加一个默认源清华源conda config --add channels https://mirrors...
python--对站点数据做EOF并做插值绘制填色图
【更新于公众号 | 简谱学记】
09-23 3696
使用python对站点数据进行EOF处理，并使用两种插值方法到规则网格上。
Python 对海表面温度进行EOF分解与前n模态合成
qq_54786024的博客
05-30 3018
与开始的eof分解略有不同，在进行分解及可视化的时候，将eof分解得到的空间模态乘以特征值的平方根来更好的展示效果。eof=solver.eofs(eofscaling=2) #空间模态 乘以特征值的平方根。solver=Eof(ssto,weights=wgts) #eof分解。solver=Eof(ssto,weights=wgts) #eof分解。三、前4个模态合成SST并比较合成SST与真实SST的差异。eof=solver.eofs() #空间模态。
python eof_python eof是什么
weixin_39724889的博客
12-04 905
EOF，为End Of File的缩写，通常在文本的最后存在此字符表示资料结束。在微软的DOS和Windows中，读取数据时终端不会产生EOF。此时，应用程序知道数据源是一个终端(或者其它“字符设备”)，并将一个已知的保留的字符或序列解释为文件结束的指明；最普遍地说，它是ASCII码中的替换字符(Control-Z，代码26)。相关推荐：《Python教程》在C语言中，或更精确地说成C标准函数库中...
python-problem-大文件的读取
毛球饲养员
09-21 491
python读取大文件问题博主在使用glove840b词向量的时候，遇到的一些坑。这个词向量大概有5.25个G容量，并且我需要按照行来进行处理。然后我直接用了f = open(path,encoding="utf-8").readlines()然后内存就炸了。我可是16G的内存呢。对比几种读文件的方法1.withwith open(path, encoding="utf-8") as f:
[root@controller ~]# sudo dnf install --nobest openstack-keystone Last metadata expiration check: 1:52:27 ago on 2025年06月18日 星期三 15时12分15秒. Error: Problem: 软件包 python3-pysaml2-7.1.2-1.oe2203sp3.noarch 需要 python3.9dist(xmlschema) >= 1.2.1，但没有提供者可以被安装 - 软件包 python3-keystone-16.0.2-2.oe2203sp3.noarch 需要 python3-pysaml2，但没有提供者可以被安装 - 软件包 python3-xmlschema-1.5.2-1.oe2203sp3.noarch 需要 python3-tox，但没有提供者可以被安装 - 软件包 openstack-keystone-16.0.2-2.oe2203sp3.noarch 需要 python3-keystone = 16.0.2-2.oe2203sp3，但没有提供者可以被安装 - 软件包 python3-tox-3.24.4-1.oe2203sp3.noarch 需要 python3-devel，但没有提供者可以被安装 - 冲突的请求 - 没有东西可提供 python3 = 3.9.9-28.oe2203sp3（python3-devel-3.9.9-28.oe2203sp3.x86_64 需要） (try to add '--skip-broken' to skip uninstallable packages)
06-19
错误信息中提到了几个问题：Problem1:没有东西可提供python3=3.9.9-28.oe2203sp3（因为python3-devel需要这个精确版本）Problem2:python3-tox需要python3-devel，但无法安装Problem3:python3-xmlschema需要python3-...
[root@localhost /]# ls /usr/bin/python2* /usr/bin/python2 /usr/bin/python2.7 [root@localhost /]# sudo ln -sf /usr/bin/python2.7 /usr/bin/python [root@localhost /]# ls -l /usr/bin/python lrwxrwxrwx 1 root root 18 Sep 23 14:41 /usr/bin/python -> /usr/bin/python2.7 [root@localhost /]# sudo yum localinstall fio-3.1-1.el7.x86_64.rpm Failed to set locale, defaulting to C.UTF-8 Last metadata expiration check: 0:11:05 ago on Tue Sep 23 14:30:57 2025. Error: Problem: conflicting requests - nothing provides /usr/bin/python needed by fio-3.1-1.el7.x86_64 (try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
最新发布
09-24
根据引用[1]，yum localinstall可以解决本地rpm包的依赖问题，但这里报错是缺少/usr/bin/python，而这个文件实际上是由系统提供的，通常由python2或python3包提供（在CentOS7中默认是python2）。 可能的原因及...
Python Source Code Analysis (1)
Inoki 的人生之路
11-08 767
In this post, we will take a dissecion of source code of Python. To benefit the simplicity and meanwhile follow the most recent functionnalities, I choose Python 3.6.9 to do the analysis. In the last ...
(sport) PS C:\Users\xy> pip install --upgrade pip setuptools Requirement already satisfied: pip in d:\anaconda\envs\sport\lib\site-packages (24.2) WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/pip/ WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/pip/ WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/pip/ WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/pip/ WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/pip/ Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping Requirement already satisfied: setuptools in d:\anaconda\envs\sport\lib\site-packages (75.1.0) WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/setuptools/ WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/setuptools/ WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/setuptools/ WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/setuptools/ WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/setuptools/ Could not fetch URL https://pypi.org/simple/setuptools/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/setuptools/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping (sport) PS C:\Users\xy> pip install --upgrade certifi Requirement already satisfied: certifi in d:\anaconda\envs\sport\lib\site-packages (2024.8.30) WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/certifi/ WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/certifi/ WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/certifi/ WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/certifi/ WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /simple/certifi/ Could not fetch URL https://pypi.org/simple/certifi/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/certifi/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping (sport) PS C:\Users\xy> pip install -i https://mirrors.aliyun.com/pypi/simple/ opencv-python Looking in indexes: https://mirrors.aliyun.com/pypi/simple/ WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /pypi/simple/opencv-python/ WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /pypi/simple/opencv-python/ WARNING: Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /pypi/simple/opencv-python/ WARNING: Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /pypi/simple/opencv-python/ WARNING: Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))': /pypi/simple/opencv-python/ Could not fetch URL https://mirrors.aliyun.com/pypi/simple/opencv-python/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='mirrors.aliyun.com', port=443): Max retries exceeded with url: /pypi/simple/opencv-python/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping ERROR: Could not find a version that satisfies the requirement opencv-python (from versions: none) Could not fetch URL https://mirrors.aliyun.com/pypi/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='mirrors.aliyun.com', port=443): Max retries exceeded with url: /pypi/simple/pip/ (Caused by SSLError(SSLZeroReturnError(6, 'TLS/SSL connection has been closed (EOF) (_ssl.c:1149)'))) - skipping ERROR: No matching distribution found for opencv-python (sport) PS C:\Users\xy> python --version Python 3.8.20 (sport) PS C:\Users\xy>
09-13
当在使用 `pip` 安装 `opencv-python`、升级 `pip` 和 `setuptools`、升级 `certifi` 时出现 `SSLZeroReturnError` 错误，可以尝试以下方法解决： - **临时忽略 SSL 验证**：虽然不推荐长期使用，但在紧急情况下可以...
EOF奇异正交分解
12-26
EOF奇异正交分解的主程序，还附带详解，FORTRAN版本，用的人都懂，与大家分享
python problem
weixin_30950887的博客
12-28 219
why? 转载于:https://www.cnblogs.com/jx-z/p/10189916.html
<Python>Problem#1 Python的函数参数传递
大海小鱼的专栏
01-22 532
本专栏会不定期增加一些Python基本问题的分析和解答以促进Python知识的理解和掌握。第一道Python题如下： #第一题Python题 a = 1 def fun(a): a = 2 fun(a) print(a) b = [] def fun(b): b.append(1) fun(b) print(b) 这道题a与b的输出是什么？我们不妨先把其中的地址打印出来：
【Python报错】已解决EOFError: EOF when reading a line
热门推荐
qq_38614074的博客
06-04 2万+
通过检查文件读取逻辑、处理标准输入中的EOF、处理管道或重定向中的EOF、使用异常处理机制以及改进程序逻辑等步骤，可以有效地解决这个错误。这个错误表明程序在尝试从输入流（如文件或标准输入）中读取一行数据时，遇到了文件结束符（EOF，End Of File），但没有成功读取到任何数据。函数从标准输入（通常是键盘）读取数据时，如果用户在没有输入任何内容的情况下直接发送了EOF信号（在Windows中通常是Ctrl+Z后回车，在Unix/Linux中通常是Ctrl+D），也会引发这个错误。在Python编程中，
经验正交函数 (EOF) / 主成分 (PCA) 分解及Python实现
江北20190411的博客
09-28 3992
前言 EOF 经验正交函数 分解原理及用法： https://wenku.baidu.com/view/93bc8a9b680203d8ce2f2468.html 方法实现过程 EOF PCA Python实现 import numpy as np from scipy import linalg # 生成数据并打乱 np.random.seed(9) data = np.random.randint(low=1, high=50, size=600).reshape(20, 30) * 10 #
python气象学习笔记（七）：EOF分析运用及代码分析
zx759174597的博客
10-22 3975
颜色标记：根据 PC 序列的符号为每一年标记不同的颜色（正为红色，负为蓝色），用于后续的折线图。
从零开始学java（三十二）--异常机制（二）try-catch捕获异常
weixin_43389063的博客
11-08 919
从零开始学java（三十二）--异常机制（二）CheckedException已检查异常异常处理的方式try-catch捕获异常 CheckedException已检查异常 所有不是RuntimeException的异常，统称为Checked Exception，又被称为“已检查异常”，如IOException、SQLException等以及用户自定义的Exception异常。 这类异常在编译时就必须做出处理，否则无法通过编译。 异常处理的方式 异常的处理方式有两种：使用“try/catch”捕获异常、使
【源码】【数据传递协议】.
盖世英雄
11-19 199
zk之间数据传递例如客户端和服务器端都是通过ByteBuffer 字节数组来作为数据载体来回传递，直接使用的是二进制字节流即ByteArrayOutputStream 和ByteArrayInputStream，而不是经常使用的JSON、XML、对象序列化等； 任何一个请求都会带消息头和消息体两部分。消息头就是RequestHeader 对象，消息体如ExistsRequest 对象；这里设计很巧妙，试想我们一个不同类型的消息内容我们如果以字节流的方式发送给server，那么server如何解析它呢？例如.
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值