单片机中实现精确延时的几种方法
在单片机开发中,经常需要进行精确的时间控制和延时操作。下面介绍几种常用的单片机精确延时的方法,并提供相应的源代码示例。
- 使用循环延时法
循环延时法是最简单常用的延时方法,通过循环执行空操作(NOP)或简单指令,控制延时的时间。延时时间的精确性取决于单片机的时钟频率和循环次数。
下面是使用循环延时法实现精确延时的示例代码,以8051单片机为例:
#include <reg51.h>
void Delay(unsigned int count)
{
墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
800+累计阅读
824平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年,写一次发全网
我也要 →
码龄3年
单片机中实现精确延时的几种方法
在单片机开发中,经常需要进行精确的时间控制和延时操作。下面介绍几种常用的单片机精确延时的方法,并提供相应的源代码示例。
循环延时法是最简单常用的延时方法,通过循环执行空操作(NOP)或简单指令,控制延时的时间。延时时间的精确性取决于单片机的时钟频率和循环次数。
下面是使用循环延时法实现精确延时的示例代码,以8051单片机为例:
#include <reg51.h>
void Delay(unsigned int count)
{
8、TM4单片机的滴答定时器,及利用定时器精确延时
TM4之滴答定时器的简单使用 滴答定时器结构比较简单,在TM4内部是一个24位自减的计数器。 初始化代码如下: SysTickPeriodSet(SysCtlClockGet()/1000); // 1ms SysTickIntRegister(SysTick_IntHandler); SysTickIntEnable(); SysTickEnable(); 详解: 1、首先进行周期设置,用...
单片机中使用C语言实现延时函数
在实际应用中,需要根据具体的单片机型号和编译器进行相应的调整和配置,以确保延时函数的正确运行。在单片机编程中,经常需要使用延时函数来控制程序的执行时间,特别是在需要等待一段时间后执行某些操作的情况下。定时器可以在一定时间间隔内触发中断,通过配置定时器的参数和中断处理函数,可以实现精确的延时。具体的定时器配置和中断处理函数的实现需要根据所使用的单片机型号和编译器进行相应的设置。需要注意的是,使用定时器延时需要对单片机的时钟和定时器进行合理的配置,以确保延时的准确性和稳定性。,表示需要延时的毫秒数。
单片机汇编延时程序算法详解
延时程序在许多应用中都非常有用,例如控制LED的闪烁频率、定时器的计时等。延时程序的原理是通过在循环中进行空操作来消耗CPU的时钟周期,从而达到延时的效果。延时的时间取决于循环中的空操作的执行次数。在单片机中,时钟频率通常是已知的,因此可以通过计算空操作执行的次数来实现精确的延时。需要注意的是,延时程序的实际延时时间可能会受到其他因素的影响,例如单片机的工作频率、编译器优化等。因此,在实际应用中,可能需要通过一些实验和调整来获得所需的精确延时时间。指令,该指令是一个空操作,不做任何实际的操作。
STC8_Delay.rar_stc8_stc8延时程序_延时函数_自动延时_自动识别时钟
次代码是针对STC8系列的单片机的延时函数,使用 此代码可以直接添加调用,程序自动获取内部系统时 钟后初始化延时函数。只要是ISP软件默认的时钟频 率都可以应用(特殊频率除外) 该代码为初版,还存在很多缺陷,请各位大佬勿喷,谢谢! 注意: 次代码仅适用于STC公司最新的STC8系列单片机
10xGenomics官方可视化工具——Loupe Browser
Loupe Browser是⼀款10xGenomics开发的交互式桌⾯应⽤程序,⽤于探索10x单细胞数据,可以用来找出感兴趣的细胞、找出显著差异表达的基因、鉴定细胞类型、探索细胞亚类和数据共享。
2026年信创系统技术应用专业人才培养基地建设方案(高职、信创新专业、人才培养、专业代码:510221)
响应国家信创产业战略及教育部新增“信创系统技术应用”专业(代码510221)的部署,联合麒麟软件、华为鸿蒙等领军企业,建设高水平信创人才培养基地。方案基于国家政策导向(如2027年央企全面国产化替代目标)和行业人才缺口(2025年缺口超80万人),提出以“产教融合、创新驱动”为核心,构建集教学、实训、认证于一体的综合性培养体系。 建设内容涵盖五大方向: 专业规划:分三阶段(2025-2030年)推进专业申报、课程开发与区域辐射,最终建成区域性信创技术创新平台。 课程体系:围绕运维、云计算、数据库、适配
深入理解EtherCAT状态机:从IGH代码看伺服电机如何从‘上电’到‘使能’
本文深入解析EtherCAT状态机的工作原理,重点探讨伺服电机从'上电'到'使能'的状态转换过程。通过分析状态字(Status Word)和控制字(Control Word)的交互机制,结合IGH代码实例,揭示DS402状态机的核心逻辑,帮助工程师解决60%以上的伺服控制问题,提升EtherCAT网络调试效率。
gRPC之gRPC开发流程与入门案例
gRPC之gRPC开发流程与入门案例
从报错到成功:手把手教你避坑clusterProfiler安装全流程
本文详细解析了clusterProfiler安装过程中的常见报错及解决方案,从CRAN安装误区到Bioconductor拼写错误,再到依赖包安装失败等问题,提供了五步正确安装法。特别适合生物信息分析新手快速掌握R包安装技巧,避免踩坑。
手把手教你学Simulink——基于Simulink的多用户MIMO系统仿真建模示例
多用户MIMO概述在多用户MIMO系统中,基站配备多个天线,可以同时与多个用户进行通信。利用空间复用技术,不同用户的信号被分配到不同的空间流上,从而实现频谱资源的高效利用。多用户MIMO的核心挑战包括信道估计、波束成形设计以及干扰管理。关键技术点波束成形:通过调整发射信号的相位和幅度,在特定方向上增强信号强度并减少干扰。信道估计:获取每个用户的信道状态信息(CSI),用于优化波束成形矩阵。调制与解调:选择合适的调制方式(如QPSK、16-QAM等)以适应不同用户的信道条件。干扰消除。
全面认识PFC和LLC
想象一下,你在拉一辆车,如果你的力气都用在推动车子前进的方向上,这样拉车会比较轻松。而如果你的力气用在不正确的方向,比如侧向、斜向,那就需要更大的力气才能推动车子。PFC就是在帮助电流“朝着正确的方向”流动,这样可以用更少的能量做更多的事情,减少无用的功率损耗。PFC负责将电流方向对齐,让电源效率更高,而LLC负责电压的高效转换,两者配合可以在更宽的负载范围内保持高效率。综上所述,PFC LLC电路是一种高效的电源转换电路,通过PFC模块和LLC模块的组合,实现了从交流电到直流电的高效转换。
YOLOv8模型轻量化实战:基于稀疏化剪枝与L1正则化的高效目标检测模型优化-附源码
本文提出一种YOLOv8轻量化方案,通过L1正则化稀疏化训练和动态阈值通道剪枝,在边缘计算场景中优化模型性能。方案分三步:首先通过L1正则诱导权重稀疏化并动态衰减系数;然后基于BN层权重统计进行通道剪枝,保留80%关键通道;最后对剪枝模型微调恢复精度。在COCO128数据集上验证,模型体积压缩40%,推理速度提升2.3倍,mAP仅下降0.4%,实现了精度与效率的平衡。该方案为移动端部署提供了可行的轻量化技术路径。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
温度PID控制PLC程序
温度PID稳定控制程序,适用于欧姆龙PLC,对其他PLC也具有很大参考价值
android 蓝牙通讯demo
android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。
3760

被折叠的 条评论
为什么被折叠?



