scruffybear的专栏

Summary Setup Wi-Fi Access Point AP Setup Wi-Fi Direct P2P ReferenceSummarySetup Wi-Fi Access Point (AP) and Wi-Fi Direct (P2P), tested with successful result.Setup Wi-Fi Access Point (AP)Follow this L

文章目录SummaryS3C2440 NAND flash 4 partitionPatch the Linux Kernel to support YAFFS2Create RootfsDownload Kernel Image and Rootfs to the S3C2440 boardReference Summary S3C2440 NAND flash 4 partition [roo...

文章目录SummaryConfiguration and build Busybox to support NetworkingConfigure Password file, RCS and Inittab fileConfigure and build kernel imageTelnetNFS mount on S3C2440 Mini2440 boardTransfer files wit...

Summary Wi-Fi Client Configuration Reboot WIFI cannot connect automatically issue ReferenceSummarySetup Samsung ARTIK Wi-Fi Client, and configured auto connect to Wi-Fi after reboot, with successful re

Summary ARTIK 530 Image Update Communicating with ARTIK ReferenceSummarySetup the ARTIC 530 board, update the image, successfully start up. Received the package as below, ARTIK 530 Image UpdateDetail

Summary Install Nodejs JavaScript environment Test on ARTIK 530 LED Start Node-RED Control LED On and OFF Blink LED ReferenceSummaryTested Node-RED on Samsung ARTIK 530 with successful result.Install N

Summary ARTIK 530 LED and Switch GPIO Blink LED Use Switch to Control LED ReferenceSummaryTested ARTIK 530 on the GPIO function, implemented the switch to control the LED light on and light off, with s

Summary ARTIK Cloud control ARTIK 530 LED Create ARTIK Cloud Rules Node-RED create logic ARTIK Cloud Temp Sensor upload data to ARTIK Cloud ReferenceSummaryTest on Samsung ARTIK 530 connect ARTIK Cloud

Summary Creating a New Device in ARTIK cloud Getting the Device Token Creating Rules Using Switch control the LED through cloud test result 1 Control LEDs remotely via ARTIK Cloud test result 2 Control

Summary Install and setup Eclipse IDE Eclipse Remote System Explorer issue of Conflicting architecture profiles ReferenceSummaryTested on Windows Eclipse IDE cross compiling, download the elf file to A

Summary Enable Client-side Transfer Arduino IDE usage Issue on Connecting Arduino IDE to ARTIK over USB ReferenceSummaryTested the IDE Arduino, Network ports to load sketches to the ARTIK boardis is wo

文章目录SummaryBasicsUsing S3C2440 as a USB HostUsing S3C2440 as a USB DiskUsing the Gadget Serial DriverReference Summary Tested on Embedded Linux S3C2440 target board to be configured as USB device, lik...