LintCode 36: Reverse Linked List II (链表反转题,重要!)

TYPE-C接口电路设计篇(一) 常见USB接口类型 随着USB Type-C接口的推行,USB Type-C是一种通用串行总线(USB)的硬件接口形式,USB Type-C接口在消费类产品普及程度越来越高,常见的适配器、笔电、手机等产品都兼容USB Type-C设计,接口多元化逐渐趋向归一,从而可以看出USB Type-C的重要性。 在了解USB Type-C接口之前,我们先来回顾下USB Type-A和USB Type-B接口,USB3.0 Type-A和Type-B接口定义分别如下。 USB 3.0... 阅读详情
  1. Reverse Linked List II
    中文English
    Reverse a linked list from position m to n.

Example
Example 1:

Input: 1->2->3->4->5->NULL, m = 2 and n = 4,
Output: 1->4->3->2->5->NULL.
Example 2:

Input: 1->2->3->4->NULL, m = 2 and n = 3,
Output: 1->3->2->4->NULL.
Challenge
Reverse it in-place and in one-pass

Notice
Given m, n satisfy the following condition: 1 ≤ m ≤ n ≤ length of list.

解法1:
参考了
http://bangbingsyb.blogspot.com/2014/11/leetcode-reverse-linked-list-ii.html
里面的图不错。
思路:

反转整个链表的变种,指定了起点和终点。由于m=1时会变动头节点,所以加入一个dummy头节点

代码如下:

/**
 * Definition of singly-linked-list:
 * class ListNode {
 * public:
 *     int val;
 *     ListNode *next;
 *     ListNode(int val) {
 *        this->val = val;
 *        this->next = NULL;
 *     }
 * }
 */

class Solution {
public:
    /**
     * @param head: ListNode head is the head of the linked list 
     * @param m: An integer
     * @param n: An integer
     * @return: The head of the reversed ListNode
     */
   /**
 * Definition for singly-linked list.
 * struct ListNode {
 *     int val;
 *     ListNode *next;
 *     ListNode() : val(0), next(nullptr) {}
 *     ListNode(int x) : val(x), next(nullptr) {}
 *     ListNode(int x, ListNode *next) : val(x), next(next) {}
 * };
 */
class Solution {
public:
    ListNode * reverseBetween(ListNode * head, int m, int n) {
        if (!head || (m >= n)) return head;
           
        ListNode *dummy = new ListNode(0);
        dummy->next = head;
        head = dummy;
        
        //get the m-1 th node
        for (int i = 1; i < m; ++i) {
            head = head->next;
        } 
        
        ListNode *prev = NULL;
        ListNode *cur = head->next; //the mth node
        
        for (int i = m; i <= n; ++i) {
            ListNode *temp = cur->next;
            cur->next = prev;
            prev = cur;
            cur = temp;
        }
        
        head->next->next = cur;
        head->next = prev;
        head = dummy->next;
        delete dummy;
        return head;
    }
};

解法2:用递归。先写出reverseN的版本。

/**
 * Definition of singly-linked-list:
 * class ListNode {
 * public:
 *     int val;
 *     ListNode *next;
 *     ListNode(int val) {
 *        this->val = val;
 *        this->next = NULL;
 *     }
 * }
 */

class Solution {
public:
    /**
     * @param head: ListNode head is the head of the linked list 
     * @param m: An integer
     * @param n: An integer
     * @return: The head of the reversed ListNode
     */
    ListNode* reverseBetween(ListNode *head, int m, int n) {
        ListNode *dummy = new ListNode(0, head);
        ListNode *p = dummy;
        int cnt = n - m + 1; //note m value is changed below, so record cnt here.
        while (--m) p = p->next;
        p->next = reverseN(p->next, cnt);
        return dummy->next;
    }

private:
    ListNode *reverseN(ListNode *head, int n) {    
       if (n == 1) return head;
       ListNode *tail = head->next, *p = reverseN(head->next, n - 1);
       //head->next = nullptr; //wrong,如果是反转整个链表可以用nullptr,但这里是反转部分,所以不行。
       head->next = tail->next;
       tail->next = head;
       return p;     
    }

};

递归的另一个版本

/**
 * Definition for singly-linked list.
 * struct ListNode {
 *     int val;
 *     ListNode *next;
 *     ListNode() : val(0), next(nullptr) {}
 *     ListNode(int x) : val(x), next(nullptr) {}
 *     ListNode(int x, ListNode *next) : val(x), next(next) {}
 * };
 */
class Solution {
public:
    ListNode* reverseBetween(ListNode* head, int left, int right) {
        if (!head || left == right) return head;
        ListNode *dummy = new ListNode(0);
        dummy->next = head;
        ListNode *a = dummy;
        for (int i = 1; i < left; i++) {
            a = a->next;
        }
        // now a is the left node to the left
        a->next = reverseFirstN(a->next, right - left + 1);
        return dummy->next;
    }
private:
    ListNode* reverseFirstN(ListNode *a, int n) {
        if (!a || n == 1) return a;
        ListNode *pre = NULL, *tmp = NULL;
        ListNode *origHead = a;
        while (n) {
            tmp = a->next;
            a->next = pre;
            pre = a;
            a = tmp;
            n--;
        }
        origHead->next = tmp;
        return pre;
    }
};

三刷:

/**
 * Definition for singly-linked list.
 * struct ListNode {
 *     int val;
 *     ListNode *next;
 *     ListNode() : val(0), next(nullptr) {}
 *     ListNode(int x) : val(x), next(nullptr) {}
 *     ListNode(int x, ListNode *next) : val(x), next(next) {}
 * };
 */
class Solution {
public:
    ListNode* reverseBetween(ListNode* head, int left, int right) {
        ListNode *dummy = new ListNode(0);
        dummy->next = head;
        ListNode *start = head, *end = head, *pre = dummy, *post = NULL;
        for (int i = 0; i < left - 1; i++) {
            pre = pre->next;
        }
        ListNode *origPre = pre;
        start = pre->next;
        for (int i = 0; i < right - 1; i++) {
            end = end->next;
        }
        post = end->next;
        ListNode *origPost = post;

        ListNode *node = start;
        while (node != post) {
            ListNode *tmp = node->next;
            node->next = pre;
            pre = node;
            node = tmp;
        }
        return dummy->next;
    }
};

稍微不同的版本

/**
 * Definition of singly-linked-list:
 * class ListNode {
 * public:
 *     int val;
 *     ListNode *next;
 *     ListNode(int val) {
 *        this->val = val;
 *        this->next = NULL;
 *     }
 * }
 */

class Solution {
public:
    /**
     * @param head: ListNode head is the head of the linked list 
     * @param m: An integer
     * @param n: An integer
     * @return: The head of the reversed ListNode
     */
    ListNode* reverseBetween(ListNode *head, int m, int n) {
        ListNode *dummy = new ListNode(0), *pre = dummy, *start = NULL, *end = NULL;
        dummy->next = head;
        for (int i = 0; i < m - 1; i++) {
            pre = pre->next;
        }
        start = pre->next;
        end = start;
        ListNode *origPre = pre;
        for (int i = m; i <= n; i++) {
            end = end->next;
        }
        ListNode *node = pre->next;
        while (node != end) {
            ListNode *tmp = node->next;
            node->next = pre;
            pre = node;
            node = tmp;
        }
        origPre->next = pre;
        start->next = node;
        return dummy->next;
    }
};
Unreal Engine开发:多人联机与网络同步_延迟补偿与预测 通过延迟补偿和预测技术,我们可以显著减少网络延迟对多人在线动作游戏的影响,提升玩家的体验。延迟补偿主要在服务器端实现,通过回溯时间点来更准确地处理输入和事件。预测技术主要在客户端实现,通过预先计算玩家的动作结果来减少延迟感。结合这两种技术,可以实现更平滑、更公平的多人游戏体验。 阅读详情

相关推荐

2021秋招IC验证面经-ARM中国/中科芯/飞腾/地平线/中兴

中科芯 (央企福利待遇好,但是百分百不解决户口,适合当地人进去躺平。) 现场面试,三个面试官,时间大约40min 首先介绍一下自己,介绍一下项目。所做项目用到了FIFO吗,深度是多少,位宽是多少,仲裁算法是什么? 验证环境中的reference model是自己写的还是本身就有的,仲裁怎么在参考模型中实现,参考模型怎么获取寄存器的值? 怎么配置RTL寄存器,通过平台的寄存器模型进行寄存器配置,寄存器模型里边的方法,写一个寄存器或读一个寄存器怎么实现? 寄存器如何实现前门访问和后门访问,后门访问时

weixin_48014653的博客 6324

Leetcode 92题反转链表 II(Reverse Linked List II) Java语言求解

题目链接 https://leetcode-cn.com/problems/reverse-linked-list-ii/ 题目描述 反转从位置 m 到 n 的链表。请使用一趟扫描完成反转。 说明: 1 ≤ m ≤ n ≤ 链表长度。 示例: 输入: 1->2->3->4->5->NULL, m = 2, n = 4 输出: 1->4->3->2-&...

随机的未知——用已知去面对未知 398

Dify视觉模型节点避坑指南:我用Qwen2.5-VL做OCR识别时踩过的3个坑(及解决方案)

本文分享了使用Dify平台和Qwen2.5-VL视觉模型进行OCR票据识别时遇到的三个常见问题及解决方案,包括文件变量传递、结构化输出和条件分支判断失效。通过实战经验,帮助开发者优化多模态模型在财务自动化中的应用,提升OCR识别精度和效率。

weixin_29284885的博客 407

LeetCode 92. Reverse Linked List II 反转从位置 m 到 n 的链表。请使用一趟扫描完成反转

一、题目 反转从位置 m 到 n 的链表。请使用一趟扫描完成反转。 说明: 1 ≤ m ≤ n ≤ 链表长度。 示例: 输入: 1->2->3->4->5->NULL, m = 2, n = 4 输出: 1->4->3->2->5->NULL 二、题解 方法一: 递归 使用递归反转链表的思路来源于反转字符串时使用的类似方法。反转字符串的一...

可控的事情要谨慎,不可控的事情要乐观。 436

避坑指南:OpenWRT改AP模式必做的5个关键设置(DHCP/防火墙/WAN口处理)

本文详细解析了将OpenWRT设备从路由模式切换为AP模式时,必须完成的五个关键设置步骤。核心在于理解AP模式本质是带无线的智能交换机,需彻底关闭DHCP服务、调整防火墙策略、正确桥接所有物理接口(包括WAN口处理),并集成无线网络,以确保设备能透明接入主路由网络,避免出现设备隔离或无法互访等常见问题。

t1u2v的博客 740

STM32H743必要外围电路分析

写在前面:这篇博客是我第一次绘制STM32最小系统板的过程记录。 2020-1-11 BOOT STM32采用ARM内核,和ARM处理器一样,都有专门的boot脚决定单片机从何处启动。 在官方数据手册的第105页,我们可以看到 系统复位后,在SYSTICK的第四个上升沿锁存BOOT引脚的值,复位后,BOOT引脚可以由用户自由配置而不会影响系统正常运行。 BOOT引脚决定了自举存储器地址,当BO...

Cui_Hongwei的博客 1万+

Reverse Linked List II

Reverse Linked List II   Reverse a linked list from position m to n. Do it in-place and in one-pass. For example: Given 1->2->3->4->5->NULL, m = 2 and n = 4, return 1->4->3->2->5->NULL.

u012158672的专栏 499

【WRF-Urban】使用 CGLC-MODIS-LCZ_100m 数据集运行 WRF 时的城市参数化问题

【WRF-Urban】使用 CGLC-MODIS-LCZ_100m 数据集运行 WRF 时的城市参数化问题

WW、forever的博客 716

LeetCode 92 Reverse Linked List Ⅱ 反转链表Ⅱ

a)第一次变换位置时,我们需要将3移动到pre节点1后面,即将pre节点的下一节点指向3,将3的下一节点指向2,将2节点的下一节点指向4,顺序为 1-》3-》2-》4-》5。b)第二次变换位置时,将4移动到pre节点1后面,即将pre节点的下一节点指向4,将4的下一节点指向3,将2节点的下一节点指向5,顺序为 1-》4-》3-》2-》5。题目:给定一个单链表的头节点head,和两个整数(left和right,left<=right),要求反转从位置left 到位置right中间的节点,返回反转后的链表。

菜鸟小扎 516

一文读懂AUTOSAR CAN通信

在AUTOSAR的分层和模块化架构中,使用PduR(Protocal Data Unit Router)将总线或者网络数据进行抽象,使得上层应用不用关心信号的来源。本文从PduR下层的CAN Interface、CAN Driver和CAN Transceiver Driver模块介绍CAN总线在AUTOSAR架构中的工作机制以及信号的收发等功能。PduR以及COM等上层模块的介绍可以参考公众号内发布的历史文章。

酒无忧的博客 2496

骚戴笔记公告

骚戴笔记公告

我从不打没有准备的仗! 2万+

leetcode 92. Reverse Linked List II(链表逆序II)

不是整个链表逆序,是取一段,在left~right这段范围的链表逆序。

蓝羽飞鸟的博客 286

假新闻检测论文分享(25)L-DefenseExplainable Fake News Detection With Large Language Model

现有的假新闻检测工作主要集中在通过深度网络结合多种信息来学习假新闻的潜在特征,如可信度、立场、传播模式、额外知识、域外数据等。尽管他们在探测上取得了成功,但受限于他们的黑箱性质,他们无法提供任何对公众至关重要的理由。为解决这一问题,一些研究致力于可解释假新闻检测(EFND),旨在同时生成准确性预测和解释。许多工作通过注意力机制在相关报道中注意突出特别的单词、短语或句子来提供可解释性。然而,这些工作只发现了对最终预测有高贡献的区域,缺乏直观和可信的解释。

weixin_41964296的博客 732

lintcode 36 Reverse Linked List II

题目描述 Description Reverse a linked list from position m to n. Given m, n satisfy the following condition: 1 ≤ m ≤ n ≤ length of list. Example Given 1-&gt;2-&gt;3-&gt;4-&gt;5-&gt;NULL, m = 2 and n = 4...

qq_35464543的博客 177

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Lintcode36 Reverse Linked List II solution 题解

【题目描述】 Reverse a linked list from position m to n. Notice:Given m, n satisfy the following condition: 1 ≤ m ≤ n ≤ length of list. 翻转链表中第m个节点到第n个节点的部分 注意:m,n满足1 ≤ m ≤ n ≤ 链表长度 【题目链接】

xuxu_ban的博客 334

SAP B1中文培訓教材_SDK

公司内部培训资料,对开发工具 ,DIAPI, UIAPI,Add-ON有详细解说

92. Reverse Linked List II(反转链表 II)两种解法(C++ & 注释)

92. Reverse Linked List II(反转链表 II)1. 题目描述2. 递归(Recursion)2.1 解题思路2.2 实例代码3. 迭代(Iteration)3.1 解题思路3.2 实例代码 1. 题目描述 反转从位置 m 到 n 的链表。请使用一趟扫描完成反转。 说明: 1 ≤ m ≤ n ≤ 链表长度。 示例: 输入: 1->2->3->4->5->NULL, m = 2, n = 4 输出: 1->4->3->2->5-&g

主要研究图形学相关领域 772

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

算法系列——反转链表II(Reverse Linked List II)

题目描述 Reverse a linked list from position m to n. Do it in-place and in one-pass. For example: Given 1->2->3->4->5->NULL, m = 2 and n = 4, return 1->4->3->2->5->NULL. Note: Given

BridgeGeorge 547

92. Reverse Linked List II

92. Reverse Linked List IIclass Solution { public: ListNode* reverseBetween(ListNode* head, int m, int n) { if(head == NULL || m == n){ return head; } ListNode ...

小菜鸟的博客 331

Reverse Linked ListII

public class ReverseLinkedListII { public class ListNode { int val; ListNode next; ListNode(int x) { val = x; } }     public ListNode reverseBetween(ListNode head, int m, int n) {     int

qq_20744301的博客 294

Reverse Linked List II(C++反转链表 II)

Reverse Linked List II(C++反转链表 II)

coolsunxu的博客 213

leetCode 92.Reverse Linked List II (反转链表II) 解题思路和方法

Reverse a linked list from position m to n. Do it in-place and in one-pass. For example: Given 1->2->3->4->5->NULL, m = 2 and n = 4, return 1->4->3->2->5->NULL. Note: Given m, n satisfy t

Android进阶 1809

[Java]Reverse Linked List II 链表翻转2

leetcode 原题链接:https://leetcode.com/problems/reverse-linked-list-ii/ Reverse a linked list from position m to n. Do it in-place and in one-pass. For example: Given 1->2->3->4->5->NULL, m =

成为一个合格的IT工作者 617

Reverse Linked List II -- LeetCode

原题链接:http://oj.leetcode.com/problems/reverse-linked-list-ii/这道题是比较常见的链表反转操作,不过不是反转整个链表,而是从m到n的一部分。分为两个步骤,第一步是找到m结点所在位置,第二步就是进行反转直到n结点。反转的方法就是每读到一个结点,把它插入到m结点前面位置,然后m结点接到读到结点的下一个。总共只需要一次扫描,所以时间是O(n),只需...

编程语言小筑 312

Reverse Linked List II问题及解法

问题描述: Reverse a linked list from position m to n. Do it in-place and in one-pass. 示例: Given 1->2->3->4->5->NULL, m = 2 and n = 4, return 1->4->3->2->5->NULL. 问题分析: 将m到n间的结点顺序反转,然后将1到m-

刘天的博客 367

【python/M/92】Reverse Linked List II

链表逆置问题

alicelmx的博客 403

【LeetCode】Reverse Linked List II 解题报告

【题目】 Reverse a linked list from position m to n. Do it in-place and in one-pass. For example: Given 1->2->3->4->5->NULL, m = 2 and n = 4, return 1->4->3->2->5->NULL. Note: Given m, n s

跳出温水的青蛙 5401
上一篇: LintCode 1324: Count Primes
下一篇: LintCode 156: Merge Intervals
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值