poj-1789Truck History(最小生成树)

AP发票批量付款程序(WEB ADI) CREATE OR REPLACE PACKAGE MEW_AP_BATCH_PAYMENTS_PKG IS   PROCEDURE MAIN(P_BATCH_ID          NUMBER                 ,P_ORG_ID            NUMBER                 ,P_BANK_ACCOUNT_NAME VARCHAR2 阅读详情

Truck History
Time Limit: 2000MS Memory Limit: 65536K
Total Submissions: 22552 Accepted: 8747

Description

Advanced Cargo Movement, Ltd. uses trucks of different types. Some trucks are used for vegetable delivery, other for furniture, or for bricks. The company has its own code describing each type of a truck. The code is simply a string of exactly seven lowercase letters (each letter on each position has a very special meaning but that is unimportant for this task). At the beginning of company's history, just a single truck type was used but later other types were derived from it, then from the new types another types were derived, and so on. 

Today, ACM is rich enough to pay historians to study its history. One thing historians tried to find out is so called derivation plan -- i.e. how the truck types were derived. They defined the distance of truck types as the number of positions with different letters in truck type codes. They also assumed that each truck type was derived from exactly one other truck type (except for the first truck type which was not derived from any other type). The quality of a derivation plan was then defined as 
1/Σ(to,td)d(to,td)

where the sum goes over all pairs of types in the derivation plan such that to is the original type and td the type derived from it and d(to,td) is the distance of the types. 
Since historians failed, you are to write a program to help them. Given the codes of truck types, your program should find the highest possible quality of a derivation plan. 

Input

The input consists of several test cases. Each test case begins with a line containing the number of truck types, N, 2 <= N <= 2 000. Each of the following N lines of input contains one truck type code (a string of seven lowercase letters). You may assume that the codes uniquely describe the trucks, i.e., no two of these N lines are the same. The input is terminated with zero at the place of number of truck types.

Output

For each test case, your program should output the text "The highest possible quality is 1/Q.", where 1/Q is the quality of the best derivation plan.

Sample Input

4
aaaaaaa
baaaaaa
abaaaaa
aabaaaa
0

Sample Output

The highest possible quality is 1/3.


> 题意大概是这样的:用一个7位的string代表一个编号,两个编号之间的distance代表这两个编号之间不同字母的个数。一个编号只能由另一个编号“衍生”出来,代价是这两个编号之间相应的distance,现在要找出一个“衍生”方案,使得总代价最小,也就是distance之和最小。
> 
> 例如有如下4个编号:
> 
> aaaaaaa
> 
> baaaaaa
> 
> abaaaaa
> 
> aabaaaa
> 
> 显然的,第二,第三和第四编号分别从第一编号衍生出来的代价最小,因为第二,第三和第四编号分别与第一编号只有一个字母是不同的,相应的distance都是1,加起来是3。也就是最小代价为3。


就是要求出一个字符串衍生出其他所有字符串要花的代价最小


#include<cstdio>
#include<cstring>
#include<algorithm>
using namespace std;
char map[2200][10];
int per[2200],n;
struct node {
	int x,y,dis;
}s[10000000];//开大点,不然会re
void init()
{
	for(int i=0;i<=n;i++)
	per[i]=i;
}
int find(int x)
{
	int t=x;
	while(t!=per[t])
	t=per[t];
	int i=x,j;
	while(i!=t)
	{
		j=per[i];
		per[i]=t;
		i=j;
	}
	return t;
}
bool join(int x,int y)
{
	int fx=find(x);
	int fy=find(y);
	if(fx!=fy)
	{
		per[fx]=fy;
		return true;
	}
	return false;
}
bool cmp(node x,node y)
{
	return x.dis<y.dis;
}
int main()
{
	int i,j,t;
	while(scanf("%d",&n),n)
	{
		init();
		for(i=0;i<n;i++)
			scanf("%s",map[i]);
		t=0;
		for(i=0;i<n;i++)
		{
			for(j=i+1;j<n;j++)
			{
				int cot=0;
				for(int k=0;k<7;k++)
				{
					if(map[i][k]!=map[j][k])
					cot++;
				}
				s[t].x=i;
				s[t].y=j;
				s[t++].dis=cot;
			}
		}
		sort(s,s+t,cmp);
		int sum=0;
		for(i=0;i<t;i++)
		{
			if(join(s[i].x,s[i].y))
			sum+=s[i].dis;
		}
		printf("The highest possible quality is 1/%d.\n",sum);
	}
	return 0;
}



SBM与超效率SBM模型实战:从原始面板数据到MATLAB高效实现 本文详细介绍了SBM模型与超效率SBM模型的核心原理,并提供了从原始面板数据预处理到MATLAB高效实现的完整实战指南。通过具体代码解析,帮助研究者掌握如何利用MATLAB进行数据标准化、模型构建、效率求解及结果可视化,从而精准评估决策单元的相对效率,尤其适用于在高效单元中进一步精细排名的场景。 阅读详情

相关推荐

卡方检验的隐藏逻辑:为什么正态分布的平方和如此重要?

本文深入探讨了卡方检验的核心逻辑,揭示了正态分布平方和在统计检验中的重要性。通过分析卡方分布与伽马分布的关系,以及实际应用案例,帮助读者理解卡方检验的原理、局限及高级应用场景,为数据分析提供有力工具。

3a9bq4r8t2y的博客 208

poj1789

Truck History Time Limit:2000MS Memory Limit:65536K Total Submissions:8270 Accepted:2970 Description Advanced Cargo Movement, Ltd. uses trucks of different types. S...

weixin_33912453的博客 303

MATLAB2021b详细安装教程

1.下载 2.安装 下载安装包后打开iso文件,若是无法打开请用解压软件打开。 ①打开MATLAB_R2021b_win64,双击软件开始安装 ② 一直点击下一步,直到步骤③ ③选择我已有我的许可证的文件密钥,并输入62551-02011-26857-57509-64399-54230-13279-37181-62117-65158-40352-64197-45508-24369-45954-39446-39538-16936-10698-58393-44718-32560-10501-40

惜洛-Jankin的博客 9万+

POJ 1789 Truck History

Truck History Time Limit: 2000MS   Memory Limit: 65536K Total Submissions: 13264   Accepted: 5059 Description Advanced Cargo Movement, Ltd. uses trucks of different types.

hqu_fritz的专栏 677

Android Camera Sensor HDR详解

本文详细介绍了Android相机传感器(Sensor)中实现高动态范围(HDR)采集的各种技术方式。主要内容包括: Sensor HDR技术分类 帧内HDR(Single-Frame HDR):在同一帧同一像素内完成多增益采集,无运动伪影和帧率损失,包括DAG(双模拟增益)、DCG(双转换增益)等技术 帧间HDR(Multi-Frame HDR):通过多帧曝光实现,如DOL(数字重叠)、Staggered HDR等 混合HDR:结合多种技术的复合方案 详细技术原理 重点解析了DAG和DCG两种主流帧内HDR

DU_YULIN的博客 358

FreeCAD地下管道自动化建模实战:Python脚本从入门到导出OBJ

本文详细介绍了如何利用FreeCAD的Python API实现地下管道的自动化建模,从数据处理到模型导出OBJ格式的全流程。通过实战案例和代码示例,展示了圆形和矩形截面管道的创建方法,以及法兰连接等特殊处理技巧,大幅提升工程设计效率。

ff678的博客 248

poj 1789 最小生成树

点击打开链接 #include #include #include #include using namespace std; const int maxv=2000+5; const int maxe=2*1e6; char str[maxv][maxv]; struct Edge{ int from,to,weight; }; bool operatorconst Edge &E1,c

老铁,干了这碗algorithms的博客 248

深入解析Vivado FIFO的Standard与FWFT模式:性能对比与应用场景

本文深入解析了Vivado FIFO的Standard与FWFT两种工作模式的核心差异。通过对比数据就绪时机、读延迟、控制逻辑和有效深度等关键特性,并结合图像处理、数据包转发等典型应用场景,为FPGA设计者提供了清晰的选择依据和实战配置指南,帮助优化数据流性能与设计效率。

weixin_29219189的博客 254

POJ1789(最小生成树,kruskal算法)

 由于和结点联系非常密切,所以容易想到使用kruskal算法。 题意:编写程序输出最高质量的火车推导计划。火车推倒计划质量的求解公式中的分子为1,分母为t0,td的距离总和。 t0,td的距离就是两个输入字符串的字母不同位置的个数。想要推导计划的质量最高就是使分母最小。即t0,td的距离总和最小。 实质上是以任意两个字符串为结点,以字符串字母不同位置的个数为两节点之间边的权值,求解最小生成树...

圣帝天龙之博客传奇 2395

进阶01:Labview与OPC UA设备通信

LabVIEW通过OPC UA实现高效设备通信方案 本文介绍了使用LabVIEW与OPC UA设备通信的完整实施方案。OPC UA协议具有跨平台兼容、高安全性和高效数据交换等优势。实施步骤包括:1)安装NI OPC UA工具包;2)搭建模拟测试环境,使用OPC UA Simulation Server创建测试变量;3)编写LabVIEW程序,实现连接服务器、事件订阅、数据读写等功能。重点展示了通过用户事件实现设备主动触发的机制,当模拟变量值改变时自动触发LabVIEW事件处理。该方案验证了OPC UA在工业

weixin_38637405的博客 1400

matlab 点云学习目录【2026最新版】

matlab 点云学习目录。博客长期更新,本文最近更新时间为:2026年6月15日。

点云侠的博客 3万+

poj-1789

//15852K 485MS G++ //http://contest.felk.cvut.cz/03prg/solved/#h #include #include #include #include using namespace std; #define TRUNK_MAX 2010 #define TRUNK_CODE 10 #define TRUNK_CODE_MAX 7 ch

fyfcauc的专栏 645

RedCap:一种通信技术的概述

总结起来,RedCap是一种基于数据包交换的通信技术,它提供了一种高效、可靠的数据传输机制。通过使用RedCap,我们可以轻松地发送和接收数据包,并确保数据的完整性和正确性。在上面的示例中,我们首先导入了RedCap库,并创建了一个RedCap实例。然后,我们定义了目标地址和源地址,并创建了一个数据包,其中包含了目标地址、源地址和要发送的数据。本文将介绍RedCap的基本原理和使用方法,并提供一些相关的源代码示例。RedCap还提供了其他一些功能,如数据包的重传机制、流量控制和拥塞控制等。

YgjWeb的博客 900

(最小生成树)POJ1789Truck History

POJ1789Truck History 题意&思路: 给你n个长度为7的字符串,每两个字符串之间的权值为相同位置字符不同的个数。每个字符串都由另一个字符串变化而来,变化的质量为1/权值和。求最大质量。 其实就是求最小权值和。 模板题。 代码: #include<iostream> #include<stdio.h> #include<stdlib.h>...

Z7784562的博客 218

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

POJ 1789 Truck History(最小生成树)

POJ 1789 Truck History(最小生成树) http://poj.org/problem?id=1789 题意:        用一个7位的string代表一个编号,两个编号之间的distance代表这两个编号之间不同字母的个数。一个编号只能由另一个编号“衍生”出来,代价是这两个编号之间相应的distance,现在要找出一个“衍生”方案,使得总代价最小,也就是distance

code 976

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

Truck History poj1789 最小生成树

传送门:poj1789 题意大概:用一个7位的string代表一个编号,两个编号之间的distance代表这两个编号之间不同字母的个数。一个编号只能由另一个编号“衍生”出来,代价是这两个编号之间相应的distance,现在要找出一个“衍生”方案,使得总代价最小,也就是distance之和最小。 看懂了题,稍微想想就能转化为求最小生成树。将编号抽象为点,两个编号之间的衍生关系抽象为边,‘距离

WA是一笔财富 355

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

POJ 1789Truck History——————最小生成树

Truck History Language:DefaultTruck History Time Limit: 2000MSMemory Limit: 65536KTotal Submissions: 33305Accepted: 12935DescriptionAdvanced Cargo Movement, Ltd. uses trucks of different types. Some...

鸿杰 的博客 252

poj1789 Truck History (最小生成树)

点击打开链接 历史上,曾用7个小写字母来表示每种truck的型号,每两种型号之间的差距为字母串中不同字母的个数。现在给出n种不同型号的truck,问怎样使 1/Σ(to,td)d(to,td)的值最小。(即找到一条连接所有truck的最短路径。典型的最小生成树的问题, discuss里说,Prim算法适合稠密图,Kruskal算法适合稀疏图,可以使用prim和kruskal两种方法。该题是稠

hello_fei 1110

poj1789 Truck History 最小生成树

题意: 用一个7为的字符串代表一个卡车的编号,每两个字符串的差异值为它们不同的字母的位数。如: abaaaaa aabaaaa 的差异值为2,因为他们有两位不同。 每个卡车的编号可以由其他编号变换过来,代价为它们的差异值。 为要生成所有的编号,最小的代价为多少。 思路: 本题可以转化成最小生成树。 每个节点代表一个编号,与其他所有节点连边,权值为代价。 可见,最小

Shion的专栏 705

poj 1789 Truck History (最小生成树)

链接:poj 1789 题意:除了第一个车型外,其他的都是由另外的车型派生而来。用一个长度为7的字符串代表一种车型, 两种车型之间的distance为两个字符串不同字符的个数,从一种车型派生到另一种车型的代价为它们之间的 distance,求n个车型之间派生的总代价最小为多少? 分析:这个题可以转化为最小生成树,每个车型为图的顶点,两两之间的距离(即不同字符的个数)为权值

happy_lcj 1032

poj 1789 Truck History(最小生成树 Prim)

poj 1789 Truck History(最小生成树 Prim)

2245

POJ 1789 Truck History 最小生成树

Advanced Cargo Movement, Ltd. uses trucks of different types. Some trucks are used for vegetable delivery, other for furniture, or for bricks. The company has its own code describing each type of a tr...

日拱一卒,功不唐捐 2759

POJ-1789-Truck History-最小生成树

http://poj.org/problem?id=1789 傻逼题犯了傻逼错误。。。。 给你n个字符串 每2个字符串之间的 不同字母个数表示两个字符串的dis距离 把字符串看作点,距离看作边权,求这个最小生成树的权值和 把mini写成minn  了wa了几次。。。。 #include #include #include #include #includ

缺氧 726

POJ - 1789 Truck History 最小生成树

一、内容 Advanced Cargo Movement, Ltd. uses trucks of different types. Some trucks are used for vegetable delivery, other for furniture, or for bricks. The company has its own code describing each type of...

Tizzi的博客 884

POJ 1789 Truck History 最小生成树

Truck History Time Limit: 2000MS   Memory Limit: 65536K Total Submissions: 23796   Accepted: 9227 Description Advanced Cargo Movement, Ltd. uses trucks of different types

Houheshuai的专栏 454

POJ1789 Truck History 最小生成树

题目大意:ACM公司给自己的运输车编号,每辆车的编号都是互不相同的7个小写字母,定义每两辆车之间的距离为:这两辆车编号上相同位置不同字母的个数,现在让你找出n辆车之间距离和的最小值。 分析:典型的最小生成树问题,把n辆车以及之间的距离看做一个无向图,先找出图中各边的权值(一个循环就行),然后就是裸的Prime了。 实现代码如下: #include #include

AC_Gibson的专栏 521
上一篇: 杭电-1233还是畅通工程(kruskal,prim)
下一篇: 杭电-1102Constructing Roads(最小生成树)
Eric_keke
博客等级 码龄12年 37粉丝 221原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值