关于 errno.h

errno.h- -                                      

查看错误代码errno是调试程序的一个重要方法。当linuc C api函数发生异常时,一般会将errno变量(需include errno.h)赋一个整数值,不同的值表示不同的含义,可以通过查看该值推测出错的原因。在实际编程中用这一招解决了不少原本看来莫名其妙的问题。比较麻烦的是每次都要去linux源代码里面查找错误代码的含义,现在把它贴出来,以后需要查时就来这里看了。
以下来自linux 2.4.20-18的内核代码中的/usr/include/asm/errno.h
#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM   1 /* Operation not permitted */
#define ENOENT   2 /* No such file or directory */
#define ESRCH   3 /* No such process */
#define EINTR   4 /* Interrupted system call */
#define EIO       5 /* I/O error */
#define ENXIO   6 /* No such device or address */
#define E2BIG   7 /* Arg list too long */
#define ENOEXEC   8 /* Exec format error */
#define EBADF   9 /* Bad file number */
#define ECHILD  10 /* No child processes */
#define EAGAIN  11 /* Try again */
#define ENOMEM  12 /* Out of memory */
#define EACCES  13 /* Permission denied */
#define EFAULT  14 /* Bad address */
#define ENOTBLK  15 /* Block device required */
#define EBUSY  16 /* Device or resource busy */
#define EEXIST  17 /* File exists */
#define EXDEV  18 /* Cross-device link */
#define ENODEV  19 /* No such device */
#define ENOTDIR  20 /* Not a directory */
#define EISDIR  21 /* Is a directory */
#define EINVAL  22 /* Invalid argument */
#define ENFILE  23 /* File table overflow */
#define EMFILE  24 /* Too many open files */
#define ENOTTY  25 /* Not a typewriter */
#define ETXTBSY  26 /* Text file busy */
#define EFBIG  27 /* File too large */
#define ENOSPC  28 /* No space left on device */
#define ESPIPE  29 /* Illegal seek */
#define EROFS  30 /* Read-only file system */
#define EMLINK  31 /* Too many links */
#define EPIPE  32 /* Broken pipe */
#define EDOM  33 /* Math argument out of domain of func */
#define ERANGE  34 /* Math result not representable */
#define EDEADLK  35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK  37 /* No record locks available */
#define ENOSYS  38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP  40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG  42 /* No message of desired type */
#define EIDRM  43 /* Identifier removed */
#define ECHRNG  44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT  46 /* Level 3 halted */
#define EL3RST  47 /* Level 3 reset */
#define ELNRNG  48 /* Link number out of range */
#define EUNATCH  49 /* Protocol driver not attached */
#define ENOCSI  50 /* No CSI structure available */
#define EL2HLT  51 /* Level 2 halted */
#define EBADE  52 /* Invalid exchange */
#define EBADR  53 /* Invalid request descriptor */
#define EXFULL  54 /* Exchange full */
#define ENOANO  55 /* No anode */
#define EBADRQC  56 /* Invalid request code */
#define EBADSLT  57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT  59 /* Bad font file format */
#define ENOSTR  60 /* Device not a stream */
#define ENODATA  61 /* No data available */
#define ETIME  62 /* Timer expired */
#define ENOSR  63 /* Out of streams resources */
#define ENONET  64 /* Machine is not on the network */
#define ENOPKG  65 /* Package not installed */
#define EREMOTE  66 /* Object is remote */
#define ENOLINK  67 /* Link has been severed */
#define EADV  68 /* Advertise error */
#define ESRMNT  69 /* Srmount error */
#define ECOMM  70 /* Communication error on send */
#define EPROTO  71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT  73 /* RFS specific error */
#define EBADMSG  74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD  77 /* File descriptor in bad state */
#define EREMCHG  78 /* Remote address changed */
#define ELIBACC  79 /* Can not access a needed shared library */
#define ELIBBAD  80 /* Accessing a corrupted shared library */
#define ELIBSCN  81 /* .lib section in a.out corrupted */
#define ELIBMAX  82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ  84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS  87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS  105 /* No buffer space available */
#define EISCONN  106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE  116 /* Stale NFS file handle */
#define EUCLEAN  117 /* Structure needs cleaning */
#define ENOTNAM  118 /* Not a XENIX named type file */
#define ENAVAIL  119 /* No XENIX semaphores available */
#define EISNAM  120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT  122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#endif
<think>我们遇到了一个编译警告,提示我们将不正确的`#include <sys/errno.h>`重定向到了`<errno.h>`。这个警告是由GCC或Clang等编译器发出的,使用了`-Wcpp`选项(该选项用于警告在预处理器中的问题)。 ### 问题分析 在Unix-like系统中,`errno.h`通常位于标准头文件目录(如`/usr/include`)下,而`sys/errno.h`并不是标准头文件。一些旧系统或特定系统可能有`sys/errno.h`,但现代系统一般使用`errno.h`。因此,当我们尝试包含`<sys/errno.h>`时,编译器可能会自动重定向到`<errno.h>`,并发出警告。 ### 解决方案 1. **修改源代码**:将`#include <sys/errno.h>`改为`#include <errno.h>`。这是最直接的方法,因为`errno.h`是标准头文件,可移植性更好。 2. **抑制警告**:如果不方便修改源代码(比如是第三方库代码),我们可以通过编译器选项抑制该警告。例如,使用`-Wno-cpp`来禁止所有预处理器相关的警告,或者使用`#pragma`在代码中禁止特定警告。 ### 方法1:修改源代码(推荐) 直接找到源代码中包含`<sys/errno.h>`的地方,将其替换为`<errno.h>`。 ### 方法2:抑制警告 如果无法修改源代码,可以在编译时忽略该警告: - 在编译命令中加入`-Wno-cpp`选项,例如: ```bash gcc -Wno-cpp your_source.c -o output ``` 或者在源代码中添加: ```c #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wcpp" #include <sys/errno.h> // 尽管有警告,但包含它 #pragma GCC diagnostic pop ``` 但请注意,方法2只是隐藏了警告,并没有解决根本问题。 ### 示例代码修改 假设我们有一个源文件`example.c`,内容如下: ```c #include <sys/errno.h> #include <stdio.h> int main() { perror("Error"); return 0; } ``` 修改后: ```c #include <errno.h> #include <stdio.h> int main() { perror("Error"); return 0; } ``` ### 解释 - `<errno.h>`是C标准库中定义错误码的头文件,它声明了`errno`全局变量以及一系列错误码的宏(如`EACCES`, `ENOENT`等)。 - 历史上,一些系统可能将`errno.h`放在`sys/`目录下,但现代标准中,直接使用`<errno.h>`即可。 ### 其他注意事项 - 这个警告通常不会影响程序的编译和运行,但为了代码的清晰和可移植性,建议修改。 - 如果是第三方库的代码,我们应该向库的维护者报告此问题,建议他们修改。 --- §§相关问题§§: 1. C语言中`errno`的作用是什么? 2. 如何在C语言中处理错误? 3. 在Linux系统中,如何查看`errno`对应的错误信息? 4. 除了`errno.h`,还有哪些常用的系统头文件? </think>### 问题分析 这个编译警告表明代码中使用了非标准的头文件包含方式 `#include <sys/errno.h>`,编译器自动将其重定向到标准头文件 `<errno.h>`。原因如下: 1. **历史兼容性问题**:早期 UNIX 系统(如 BSD)可能将 `errno.h` 放在 `sys/` 目录下 2. **现代标准要求**:POSIX 和 C 标准规定应直接使用 `<errno.h>` 3. **编译器优化**:`-Wcpp` 选项专门检测预处理器中的可疑操作 ### 解决方案 **推荐方案:修改源代码** ```c // 将: #include <sys/errno.h> // 改为: #include <errno.h> ``` **临时方案(不推荐):抑制警告** 在编译命令中添加: ```bash gcc -Wno-cpp your_program.c -o output ``` ### 代码示例 修改前后的对比: ```c /* 修改前(产生警告) */ #include <sys/errno.h> #include <stdio.h> int main() { if (some_syscall() == -1) { perror("Error occurred"); // 依赖errno } return 0; } ``` ```c /* 修改后(标准写法) */ #include <errno.h> // 标准头文件位置 #include <stdio.h> int main() { if (some_syscall() == -1) { perror("Error occurred"); } return 0; } ``` ### 关键解释 1. **errno.h 的作用** 定义全局变量 `errno` 和标准错误码(如 `EACCES`、`ENOENT`),用于系统调用错误处理 2. **头文件路径规则**: - 标准头文件:直接使用 `<header.h>` 形式 - 系统特定头文件:使用 `<sys/header.h>` 形式(如 `<sys/socket.h>`) - `errno.h` 属于标准头文件,不应放在 `sys/` 目录 3. **编译器行为**: ```mermaid graph TD A[#include <sys/errno.h>] --> B{是否是标准路径?} B -->|否| C[重定向到<errno.h>] C --> D[发出-Wcpp警告] ``` ### 相关实践建议 1. 在跨平台项目中始终使用标准头文件路径 2. 使用 `gcc -M` 检查头文件依赖关系 3. 定期更新老旧代码库中的头文件引用 ---
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值