nand erase

?       - alias for 'help'
bdinfo  - print Board Info structure
bootm   - boot application image from memory
chpart  - change active partition
date    - get/set/reset date & time
dcache  - enable or disable data cache
echo    - echo args to console
erase   - erase FLASH memory
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print command description/usage
icache  - enable or disable instruction cache
iminfo  - print header information for application image
imls    - list all images found in flash
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loads   - load S-Record file over serial line
mtdparts- define flash/nand partitions
nand    - NAND sub-system
nboot   - boot from NAND device
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
saves   - save S-Record file over serial line
setenv  - set environment variables
sleep   - delay execution for some time
version - print monitor version
MaximASP> nand erase


NAND erase: device 0 whole chip
Skipping bad block at  0x1ff80000                                          
Skipping bad block at  0x1ffa0000                                          
Skipping bad block at  0x1ffc0000                                          
Skipping bad block at  0x1ffe0000