How to connect WN111 & WNR834Bv2 using WPS PIN method?

本文提供了一步一步的指导，帮助您使用WPS设置Netgear WN111无线适配器，并确保它能顺利连接到WNR834Bv2路由器。文中详细介绍了如何安装最新软件、激活WPS并完成适配器的网络配置。

Things to check before you begin:

Install the latest WN111 software on your computer. You may download the latest driver on this link, http://kbserver.netgear.com/products/WN111.asp.
Make sure to have the latest firmware on your WNR834Bv2 router and able to connect to the Internet.
If you have the latest firmware on the WNR834Bv2, go to Advanced menu and click on Wireless Settings. Make sure to have a check mark in the Keep Existing Wireless Settings box and hit Apply.

Configuration Steps:

Login to the router user interface and click on Add WPS Client menu.
Click the Next button to proceed.
Select PIN Number for the setup method.
The wizard will ask for the WPS PIN of the adapter.
On the WN111 adapter utility, please click on Join a Network.
Select Yes, the AP/router supports either of them and I want to use it and then click Next.
Select No to generate a WPS PIN and hit Next.
Make a note of the PIN number generated and hit Next.
The adapter WPS wizard will give you 4 minutes window to activate WPS on the router.
Go back to the router user interface and type the PIN from the wireless adapter in the Enter Client’s PIN field and click Next.
The router and adapter will start their discovery and exchange settings to connect.
A similar page below will appear on the router to indicate a successful connection. Click OK to finish wizard.
On the WN111 wizard, just click Finish to close the wizard.