s5p6818安装uboot

1、首先要拿到得是uboot压缩包
现在用的是这个netok版本的,具体的可以自己下载
在这里插入图片描述2、拿到虚拟机里解压,得到下图所示
在这里插入图片描述
3、 make distclean 可以使用命令清除之前的配置

4、make x6818_config 命令再配置/include/configs/x6818.h
(make xxx_config)因板子不同名字也有所不同,根据自己所定
在这里插入图片描述
5、make 最后编译就ok了

6、将所得ubootpak.bin文件从虚拟机拷贝到fastboot文件夹下(要有fastboot工具),将开发板连接至调试助手上,连接OTG数据线,重新给开发板上电复位,导航即使结束前进入uboot模式,输入fastboot,显示下图(这步时,要注意因数据线松动而产生的批处理(双击sp_linux_image_down.bat)失败的现象)
在这里插入图片描述
此时,双击sp_linux_image_down.bat
在这里插入图片描述
此时就完成了
在这里插入图片描述

### S5P4418 U-Boot Boot Loader Information and Tutorials For the S5P4418 processor, detailed documentation on configuring and using the U-Boot bootloader can be found through specialized resources dedicated to embedded systems development. The official U-Boot project maintains comprehensive guides that cover a wide range of processors including models similar to the S5P4418[^1]. The U-Boot source code repository also contains specific configuration files tailored for various platforms which include support for Samsung's Exynos series such as the S5P4418. Developers often contribute patches and updates ensuring compatibility with newer hardware revisions. To get started with U-Boot on an S5P4418-based board: ```bash git clone https://source.codeaurora.org/external/u-boot/u-boot.git cd u-boot make s5p4418_defconfig make menuconfig ``` These commands initialize a build environment configured specifically for devices powered by this SoC family. Customization options within `menuconfig` allow adjustments according to individual project requirements or unique features supported by particular boards utilizing the S5P4418 chipset. Additionally, community forums like Stack Overflow provide valuable insights from developers who have encountered challenges while working with these types of ARM architectures. Technical articles published online may offer step-by-step instructions along with troubleshooting tips when setting up U-Boot environments targeting the S5P4418 platform. --related questions-- 1. What are some common issues faced during U-Boot compilation for S5P4418? 2. How does one customize U-Boot settings via `menuconfig` effectively? 3. Are there any known limitations of running certain operating systems after booting with U-Boot on S5P4418? 4. Can you recommend additional resources beyond official documents for learning about U-Boot customization? 5. Is it possible to integrate custom scripts into U-Boot for automating tasks at startup?
评论 4
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值